(SOLVED) pfSense+ Plus upgrade from 23.01 to 23.05

stephenw10

Ah OK, looks like you pulled in a bad version of pfSense-upgrade at some point.

Set the repo branch back to 23.01.
Then run:

pkg-static clean -ay; pkg-static install -fy pkg pfSense-repo pfSense-upgrade

That should give you back a functional pkg and pfSense-upgrade and then you can upgrade to 23.05.

Steve

Dobby_

@stephenw10 said in pfSense+ Plus upgrade from 23.01 to 23.05:

Ah OK, looks like you pulled in a bad version of pfSense-upgrade at some point.

Set the repo branch back to 23.01.
Then run:
pkg-static clean -ay; pkg-static install -fy pkg pfSense-repo pfSense-upgrade
That should give you back a functional pkg and pfSense-upgrade and then you can upgrade to 23.05.

Steve

Thank you very much for the fast answer, now I am on 2.7 devel (2.7.0.a.20230501.0600) and have to wait for the register function will be back and activated, then I will be perhaps able to upgrade from 2.7 to the 23.05.

Or if you say it is to long time I will be perhaps went back to 2.6 (ZFS) and trying once more to upgrade from here
to 23.05.

EDIT: The TNSR must go, I am now on 23.01 and 2.7
on the other box. With the next box the TNSR will
be back then!

stephenw10

If you install the Feb 15th 2.7 snapshot and then upgrade to 23.01 from there dircetly it will work because the php versions match, both php81.

If you update to the current 2.7 snapshot it uses php82 and will require a forced package upgrade after upgrading to 23.01. Or wait for 23.05.

Steve

Dobby_

@stephenw10 said in pfSense+ Plus upgrade from 23.01 to 23.05:

If you install the Feb 15th 2.7 snapshot and then upgrade to 23.01 from there dircetly it will work because the php versions match, both php81.

If you update to the current 2.7 snapshot it uses php82 and will require a forced package upgrade after upgrading to 23.01. Or wait for 23.05.

Steve

Sadly said it is not my week stephen!

The register system is down or unreachable to go from
2.6 -> 23.01 and with the 2.7 upgrade I will wait until
23.05 is ready

stephenw10

If you just reinstalled you might just be hitting the time limit on cert updates. It will clear by itself or if you send me your NDI in chat I can clear it now.

artooro

I'm having the same issue as OP

Fresh install on a box of pfSense 2.6 CE
Activated pfSense Plus key and upgraded to v23.01
Attempted to upgrade to v23.05.b.20230502.0600 in System / Update

Screenshot 2023-05-02 at 20.36.58.png

I've confirmed using ps that there are no pkg or pfsense-upgrade processes running in the background.

When using shell option 13

pkg-static: No package(s) matching pfSense-pkg-*
pfSense-repoc-static: cannot get package information
failed to collect the system information.
failed to update the repository settings!!!
failed to update the repository settings!!!

Tried to re-install pfSense-repo pfSense-upgrade which did not make a difference.

stephenw10

So the upgrade from 2.6 to 23.01 was successful?

It only failed after you set the update branch to 23.05?

Is there anything in the system logs at that point?
I would expect it to show some pkg updates when you changed the branch.

Steve

artooro

@stephenw10 yeah correct, upgrade from CE 2.6 to Plus 23.01 no issue. All I did is make some interface changes in between, no packages or anything installed.

In the system log there is only two lines that shows up

May  3 10:06:51 pfsense php-fpm[44992]: /pkg_mgr_install.php: Configuration Change: admin@10.1.2.3 (Local Database): Creating restore point before upgrade.
May  3 10:06:51 pfsense check_reload_status[435]: Syncing firewall

Setting the update branch back to 23.01, then running pkg-static clean -ay; pkg-static install -fy pkg pfSense-repo pfSense-upgrade and then running option 13 from the console allows the update script to run without errors.

Now if I set the branch to 23.05 in the system log it shows:

May  3 10:26:15 pfsense pkg-static[57146]: pkg upgraded: 1.18.4_4 -> 1.19.1_1

But the webGUI shows Unable to check for updates
Screenshot 2023-05-03 at 10.27.48.png

Reloading the page shows version 23.05.b.20230503.0600 available. Nothing is logged.
Screenshot 2023-05-03 at 10.28.40.png

I click Confirm to upgrade, and the system.log shows

May  3 10:29:23 pfsense php-fpm[394]: /pkg_mgr_install.php: Configuration Change: admin@10.1.2.3 (Local Database): Creating restore point before upgrade.
May  3 10:29:23 pfsense check_reload_status[423]: Syncing firewall
May  3 10:29:31 pfsense pkg-static[30438]: pfSense-upgrade upgraded: 1.0_59 -> 1.0_65

And the webGUI shows
Screenshot 2023-05-03 at 10.29.58.png

Subsequent attempts to run it again bring me back to the beginning where all the log shows is Creating restore point.

stephenw10

Ok, thanks. Let me see if I can replicate it.....

stephenw10

Replicated it. Digging....

artooro

@stephenw10 have you found anything more on this? I just tested it again now trying to update to 23.05.r.20230509.2241 and still having the same issue.

stephenw10

From 23.01? That should be working now as expected. It's possible you are stuck on an older version of the pfSense-upgrade package. Setting the repo back to 23.01 and then running:

pkg-static clean -ay; pkg-static install -fy pkg pfSense-repo pfSense-upgrade

Should allow it to then pull in the current version when you switch back.

artooro

@stephenw10 done that. You said above you had replicated it so I thought maybe you found a solution.

Just getting this

>>> Updating repositories metadata... 
Updating pfSense-core repository catalogue...
Fetching meta.conf: . done
Fetching packagesite.pkg: . done
Processing entries: .. done
pfSense-core repository update completed. 15 packages processed.
Updating pfSense repository catalogue...
Fetching meta.conf: . done
Fetching packagesite.pkg: .......... done
Processing entries: 
Processing entries............. done
pfSense repository update completed. 549 packages processed.
All repositories are up to date.
>>> Upgrading pfSense-upgrade... done.
pkg-static: No package(s) matching pfSense-pkg-*
pfSense-repoc-static: cannot get package information
failed to collect the system information.
failed to update the repository settings!!!
failed to update the repository settings!!!
Netgate pfSense Plus - Serial: xxxx - Netgate Device ID: xxxx

stephenw10

Yes, we found an issue there and fixed it. It should be working OK now.
What output do you see from: pkg-static info -x pfSense

artooro

@stephenw10 ok interesting.
So here's what it shows when I have the update channel set to 23.05-RC

pfSense-23.01
pfSense-Status_Monitoring-1.8
pfSense-base-23.01
pfSense-boot-23.01
pfSense-default-config-serial-23.01
pfSense-kernel-pfSense-23.01
pfSense-rc-23.01
pfSense-repo-23.01
pfSense-repoc-20230418_1
pfSense-upgrade-1.0_66
php81-pfSense-module-0.91

And setting the channel back to 23.01 Stable and re-installing the upgrade package, it shows:

pfSense-23.01
pfSense-Status_Monitoring-1.8
pfSense-base-23.01
pfSense-boot-23.01
pfSense-default-config-serial-23.01
pfSense-kernel-pfSense-23.01
pfSense-rc-23.01
pfSense-repo-23.01
pfSense-repoc-20230418_1
pfSense-upgrade-1.0_61
php81-pfSense-module-0.91

stephenw10

Hmm, that looks correct. What happens if you try to upgrade from the CLI using: pfSense-upgrade -d ?
It should at least show you the real error there.

artooro

@stephenw10

pkg-static: No package(s) matching pfSense-pkg-*
pfSense-repoc-static: cannot get package information
failed to collect the system information.
failed to update the repository settings!!!
failed to update the repository settings!!!

Now I just noticed that if I run pkg-static bootstrap -f that it shows authentication errors.

Bootstrapping pkg from pkg+https://pfsense-plus-pkg.netgate.com/pfSense_plus-v23_05_amd64-pfSense_plus_v23_05, please wait...
Certificate verification failed for /C=US/ST=Texas/L=Austin/O=Rubicon Communications, LLC (Netgate)/OU=pfSense Plus/CN=pfsense-plus-pkg01.atx.netgate.com
48986704949248:error:1416F086:SSL routines:tls_process_server_certificate:certificate verify failed:/var/jenkins/workspace/pfSense-Plus-snapshots-23_01-main/sources/FreeBSD-src-plus-RELENG_23_01/crypto/openssl/ssl/statem/statem_clnt.c:1921:
...

I verified that date and time is correct. Oddly it was able to see that there was the new 23.05.r.20230509.2241 build today so it's able to connect to some degree.

If nobody else is dealing with this issue upgrading to 23.05-RC then I'll just re-install this box and start over.

stephenw10

Mmm, that particular issue has been fixed but you seem to be stuck in a dead-end somehow.

Reinstalling is going to be quicker.

bcdouglas

@stephenw10 I seem to be stuck as well. "pkg-static clean -ay; pkg-static install -fy pkg pfSense-repo pfSense-upgrade" didn't do the trick for me.

Shell Output - pkg-static info -x pfSense

pfSense-23.01
pfSense-Status_Monitoring-1.8
pfSense-base-23.01
pfSense-boot-23.01
pfSense-default-config-serial-23.01
pfSense-kernel-pfSense-23.01
pfSense-pkg-Cron-0.3.8_3
pfSense-pkg-Netgate_Firmware_Upgrade-0.56
pfSense-pkg-Service_Watchdog-1.8.7_1
pfSense-pkg-Status_Traffic_Totals-2.3.2_3
pfSense-pkg-System_Patches-2.2.2
pfSense-pkg-arping-1.2.2_4
pfSense-pkg-arpwatch-0.2.1
pfSense-pkg-pfBlockerNG-3.2.0_4
pfSense-rc-23.01
pfSense-repo-23.01
pfSense-repoc-20230418_1
pfSense-upgrade-1.0_66
php81-pfSense-module-0.91

Shell Output pfSense-upgrade -d

pfSense-repoc-static: invalid signature
failed to read the repo data.
failed to update the repository settings!!!
failed to update the repository settings!!!

Still seeing "Another instance of pfSense-upgrade is running. Try again later" when trying a GUI update from 23.01 to today's RC (May 12)

stephenw10

If you set it back to 23.01 does it still show an error?

Does pkg-static -d update also error out?