Netgear Switch GS110TPP and/or LAGG latency

[4o4rh]

With my quotom i3 8 port, if i do a traceroute from WAN1 and WAN2 as the sources address, i get a latency of 11ms (12 hops) and 13ms (2 hops) respectively.
From the end device which sits behind a netgear GS110TPP i get 17ms+
The netgear is connected to the i3 via the port 9/10 trunk ports configured as LAGG.
If i traceroute from the vlan as source, i get the same result. so the i3 is not adding any measurable amount

My question is;
6ms does that seem long for a switch and/or lagg interface?
Looking at the specs below, something seems very wrong when i get 6ms vs 4micro seconds per the specs.
Or, i am not understanding something properly

Performance Specifications GS110TPv3
1G Copper latency (μsec)
(64-byte; 1518-byte; 9216-byte frames)
64-byte: 3.693 μsec
1518-bye: 3.897 μsec
9216-byte: 3.616 μsec

[tinfoilmatt]

@gwaitsi you're consulting L2 specs to assess L3 throughput performance? apples to oranges.

My question is;
6ms does that seem long for a switch and/or lagg interface?

short answer: no.