OpenVPN for 1 Vlan, WAN for all others.
-
I know there are several posts and a few YouTube videos on this but I just can't get this working correctly. I swear I'm doing it right(or at least I tried a combination that should have worked)
As configured now. The WAN works with NAT for all Vlans but my IOT-Camera.
I can flip that to make only the Camera Vlan work by unchecking "Do Not Pull Routes" in the OVPN Client Config. But obviously I want both to work. All VLANS to WAN except CAMERA-VLAN.
Right now config with ExpressVPN but I have Vyper as well and I get the same result.
Here are snaps of my config.
OpenVPN Setup and Online
Gateway Configured.
FW NAT Rules - Using Manual now, but I've tried hybrid as well.
FW Rules for Camera Vlan point to VPN as the Gateway.
FW Rule for ExpressVPN - I have tried any to any here just to see and it doesn't help.
Any help appreciated.
Thanks
-
I fixed on my own. I am not sure why but the default "Camera Subnets" was somehow not correct. I created a new Alias with the Camera Subnet defined properly, then applied it to the Firewall Rule and the Nat Rule for the Camera Subnet section, and it worked.
I also added the kill switch with tagging which is defined in this video. Which for anyone having trouble, this was the best thing I found in all my searching.
https://forums.lawrencesystems.com/t/how-to-setup-pfsense-openvpn-policy-routing-with-kill-switch-using-a-privacy-vpn-youtube-release/12441