Intel E810-C drivers
-
@stephenw10 said in Intel E810-C drivers:
24.03
24.03 is pfSence PLUS, not CE if I understand correctly. Current CE is 2.7.2. Please advise and thank you.
-
24.03 is Plus, yes. That will be the next release after the module was added.
-
@stephenw10 So I have to wait for CE 2.8.X release which could happen in 3 years from now? Or 2.7.3 could be released earlier? ETA, please? Thank you very much!
-
There is no ETA for 2.8 yet. If you upgrade to Plus though 24.03 dev snapshots are available today.
-
@stephenw10 Well, I currently operate version 2.7.2 CE on my home setup within a virtual machine. Am I understanding correctly that your suggestion entails purchasing a $129 annual subscription for a single kernel module that is already integrated within the FreeBSD distribution, thus available free of charge? I appreciate your clarification on this matter. Thank you kindly for your assistance.
-
No I'm saying if you need that today it is available in Plus snapshots. I wouldn't expect a 24.03 kernel module to load in 2.7.2, the kernels are too different.
-
@stephenw10 Appreciate your reply. Both current 23.09.01 PLUS and 2.7.2 CE are based on FreeBSD 14-CURRENT, successor of FreeBSD 14.0-RELEASE, which has ICE kernel modules "by default":
freebsd-version
14.0-RELEASE
ls -la /boot/kernel/ | grep ice
-r-xr-xr-x 1 root wheel 705088 Feb 18 12:18 ice_ddp.ko
-r-xr-xr-x 1 root wheel 19136 Nov 10 04:02 icee.ko
-r-xr-xr-x 1 root wheel 607432 Feb 18 12:18 if_ice.ko
-r-xr-xr-x 1 root wheel 39352 Nov 10 04:03 ng_device.koWhat was the reason(s) to drop those off pfSense distributions? Both Plus and CE?
Thank you.
-
It's not actually built on the FreeBSD 14 release. The modules we build for pfSense have always been a subset of the available modules. It doesn't make sense to build a lot of those for a firewall/router. New modules are added to our build list and ice_ddp wasn't on it at that time.
-
@stephenw10 This is not entirely correct.
OPNSense 24.1.X was based on FreeBSD 13.2-RELEASE-p9 - way before FreeBSD 14 released.
Guess what? I does includes ICE DDP.freebsd-version
13.2-RELEASE-p9
ls -la /boot/kernel |grep ice
-r-xr-xr-x 1 root wheel 705024 Jan 25 06:16 ice_ddp.ko
-r-xr-xr-x 1 root wheel 15312 Jan 25 06:16 icee.ko
-r-xr-xr-x 1 root wheel 604728 Jan 25 06:16 if_ice.ko
-r-xr-xr-x 1 root wheel 17384 Jan 25 06:16 ng_device.koPlease advise and thank you.
-
The module was not on our build list when 2.7.2 was built. It is in fact available in 23.09.1.
-
@stephenw10 Means, (I'm sorry to say) you intentionally dropped ICE DDP from both PLUS (you said "included in 24.03" earlier) and CE released on 2023-12-07 (https://docs.netgate.com/pfsense/en/latest/releases/versions.html#pfsense-ce-software). Correct? I can not test PLUS because this is CE related forum, and I had a hope. Thank you.
-
I had 24.03 open at the time to check but the module is also in 23.09.1.
We build a limited selection of kernel modules and update them as required. This one happened to not be on the list in 2.7.X.
There's already a feature request open for it: https://redmine.pfsense.org/issues/15174
-
@stephenw10 I'm afraid that's not entirely accurate. After the pfSense 2.7.2 installation process, I observed that the if_ice and ice_ddp modules, which were present in the /boot/kernel directory of the 2.7.2 ISO image, are no longer available. This could potentially be a glitch or a bug in the installation procedure. Following the transfer of these modules from the ISO to the pfSense installation and the addition of corresponding "tunable variables" (if_ice_load and ice_ddp_load), along with a reboot, all functionalities are now operational. With DDP loaded, I now have 16 Tx and Rx queues instead of just one. Thank you.
-
Hmm, well that's interesting! I would not have expected any difference in the modules built there. Well that's an easy solution at least.
-
@stephenw10 Well, 2.7.2 and 23.09.1 have the same kernel version, so the both versions should have the same set of compiled drivers. BTW, 2.6 CE also has ice_ddp on ISO, but not after installation ;)
-
out of curiosity now that 2.8 has been released,
can anyone confirm if 2.8.x CE contains the /boot/kernel/ice_ddp.ko drivers by default?
-
@jsone Downloading, let me check it out, hold on
-
It does not.
-
Or rather the ice driver is included but not ice_ddp.
-
thank you for the update despite the fact that the answer is a little disheartening
