Please , Idont want to reinstall again!!!!
-
Do you have automatic outbound NAT still enabled? Is it generating rules for localhost as source?
-
-
-
Ok and WAN is the default route?
There is no rule for localhost on MULLVARD so Unbound can't use that if it's sourcing fro localhost.
-
-
-
-
-
@stephenw10
What kind of rule in detail please, should me create in mullvad? Redirect DNS , the same as on other ones? -
An outbound NAT rule exactly like the one you have on WAN for localhost.
However with WANGW as the default that should be the default route. Unbound should try to use that.
-
-
-
Do you see states created by Unbound when set to localhost?
-
You should see states like:
WAN udp 172.21.16.85:6334 (127.0.0.1:13521) -> 198.41.0.4:53 MULTIPLE:SINGLE 1 / 1 56 B / 1 KiB WAN udp 172.21.16.85:20807 (127.0.0.1:4964) -> 193.0.14.129:53 MULTIPLE:SINGLE 1 / 1 60 B / 1 KiB -
-
@stephenw10 Did save resolver settings with localhost, but no any info about WAN in states only MULLVAD interface, Before set default gateway in auto in routing
-
Is it running in forwarding mode?
What DNS servers are configured if so?
If they are the Mulvard servers and have static routes over the VPN then it will always use that. That should work as long the VPN is up.
-
-
-
Check the routing table. Is there a default route? Is it valid?
