Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Wireguard Site to Site Multi-WAN Failover Question

    Scheduled Pinned Locked Moved WireGuard
    2 Posts 2 Posters 432 Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • T
      tman222
      last edited by

      Hi all,

      I have two sites connected via Wireguard VPN tunnel, let's call them site 1 and site 2, with their respective IP addresses mapped to site1.tld and site2.tld domains. Site 1 is a Multi-WAN setup in fail-over configuration. Should WAN1 fail on site 1, it will switch automatically over to WAN2 and the site1.tld domain will be mapped to the WAN2 IP address (via dynamic DNS configuration). For the Wireguard tunnel between sites 1 and 2 to switch over to WAN2 if WAN1 fails on site 1, is there anything else I have to do besides ensuring that Wireguard traffic can pass on both WAN1 and WAN2 interfaces on site 1? Since this is a failover configuration, there is no need to configure a second Wireguard interface, correct?

      Thanks in advance for your help.

      Bob.DigB 1 Reply Last reply Reply Quote 0
      • Bob.DigB
        Bob.Dig LAYER 8 @tman222
        last edited by

        @tman222 Good question. Try it!

        1 Reply Last reply Reply Quote 0
        • First post
          Last post
        Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.