LAN machine can't ping printer

bmeeks

@JonathanLee said in LAN machine can't ping printer:

Do you have icmp allowed on the firewall for that subnet?

@JonathanLee, he has already said both devices are on the same subnet. There is no network firewall in play at all. The only possibility would be a host firewall in place on the PC or printer, but I've never seen a printer with a built-in host firewall.

johnpoz

@bmeeks yeah me neither.. Even if it did have a firewall, for sake of argument.. The error would of been timeout vs those errors. Since even firewalls allow for arp.

JonathanLee

@johnpoz said in LAN machine can't ping printer:

192.168.1.255.

You mean 255.255.255.0 right @eiger3970-0

johnpoz

@JonathanLee my guess is he just posted the numbers he saw on an output of ifconfig or something without really understanding what it was

inet 192.168.2.253 netmask 0xffffff00 broadcast 192.168.2.255

That is just showing the directed broadcast address.

eiger3970 0

This post is deleted!

eiger3970 0

@JonathanLee I'm confused?
My printer did have network settings:
192.168.1.160/24 255.255.255.0, but I changed it to:
192.168.1.160/24 192.168.1.255, because the output of the LAN computer and VM router both show:
192.168.1.120/24 192.168.1.255 and:
192.168.1.170/24 192.168.1.255 respectively.

I have always used 255.255.255.0, so I'm a bit unclear why this changed to 192.168.1.255?

johnpoz

@eiger3970-0 nothing changed the mask should be 255.255.255.0 or /24.. That 192.168.1.255 is the directed broadcast address.. See the netmask there in my example 0xffffff00, that would convert to 255.255.255.0

No wonder your having issues if you changed the mask to 192.168.1.255 - which to be honest not sure why the printer would even accept such a number, its not a valid network mask.

eiger3970 0

@johnpoz thanks.
I changed 255.255.255.0 to 192.168.1.255 after the problem, as a fix attempt.

Yes, somehow it's working, but I'll change back to the typical 255.255.255.0 on the printer.

JonathanLee

@eiger3970-0 Don't change that it should be 255.255.255.0 as your subnet with the cider notion of /24

eiger3970 0

@JonathanLee Hello, I changed the printe to:
IP address: 192.168.1.160
Netmask: 255.255.255.0
Gateway 192.168.1.170

Unfortunately, the computer won't ping the printer via the VM router?

Computer with Ethernet cable to printer.

linuxmint@linuxmint:~$ ip -c a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: enp2s0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc fq_codel state DOWN group default qlen 1000
    link/ether 1c:61:b4:6d:38:4f brd ff:ff:ff:ff:ff:ff
4: virbr0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN group default qlen 1000
    link/ether 52:54:00:ca:06:f0 brd ff:ff:ff:ff:ff:ff
    inet 192.168.122.1/24 brd 192.168.122.255 scope global virbr0
       valid_lft forever preferred_lft forever
5: br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
    link/ether 1c:61:b4:6d:38:4f brd ff:ff:ff:ff:ff:ff
    inet 192.168.1.120/24 brd 192.168.1.255 scope global noprefixroute br0
       valid_lft forever preferred_lft forever
    inet6 fe80::1e61:b4ff:fe6d:384f/64 scope link 
       valid_lft forever preferred_lft forever
6: vnet0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master br0 state UNKNOWN group default qlen 1000
    link/ether fe:54:00:ac:44:b5 brd ff:ff:ff:ff:ff:ff
    inet6 fe80::fc54:ff:feac:44b5/64 scope link 
       valid_lft forever preferred_lft forever
7: vnet1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master br0 state UNKNOWN group default qlen 1000
    link/ether fe:54:00:a1:d1:e2 brd ff:ff:ff:ff:ff:ff
    inet6 fe80::fc54:ff:fea1:d1e2/64 scope link 
       valid_lft forever preferred_lft forever
8: vnet2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master br0 state UNKNOWN group default qlen 1000
    link/ether fe:54:00:09:d3:92 brd ff:ff:ff:ff:ff:ff
    inet6 fe80::fc54:ff:fe09:d392/64 scope link 
       valid_lft forever preferred_lft forever

VM router:

linuxmint@linuxmint:~$ ssh admin@192.168.1.170
(admin@192.168.1.170) Password for admin@pfSense.home.arpa:
QEMU Guest - Netgate Device ID: 623d6cd6daf11688adb4

*** Welcome to pfSense 2.7.2-RELEASE (amd64) on pfSense ***

 WAN (wan)       -> re0        -> v4/DHCP4: 100.76.25.213/10
 LAN (lan)       -> vtnet0     -> v4: 192.168.1.170/24

 0) Logout (SSH only)                  9) pfTop
 1) Assign Interfaces                 10) Filter Logs
 2) Set interface(s) IP address       11) Restart webConfigurator
 3) Reset webConfigurator password    12) PHP shell + pfSense tools
 4) Reset to factory defaults         13) Update from console
 5) Reboot system                     14) Disable Secure Shell (sshd)
 6) Halt system                       15) Restore recent configuration
 7) Ping host                         16) Restart PHP-FPM
 8) Shell

Enter an option: 8

[2.7.2-RELEASE][admin@pfSense.home.arpa]/root: ifconfig
vtnet0: flags=1008843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,LOWER_UP> metric 0 mtu 1500
	description: LAN
	options=800b8<VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,LINKSTATE>
	ether 52:54:00:09:d3:92
	inet 192.168.1.170 netmask 0xffffff00 broadcast 192.168.1.255
	inet6 fe80::5054:ff:fe09:d392%vtnet0 prefixlen 64 scopeid 0x1
	media: Ethernet autoselect (10Gbase-T <full-duplex>)
	status: active
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
re0: flags=1008843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,LOWER_UP> metric 0 mtu 1500
	description: WAN
	options=8209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,LINKSTATE>
	ether a8:a1:59:6e:1f:8b
	inet 100.76.25.213 netmask 0xffc00000 broadcast 100.127.255.255
	inet6 fe80::aaa1:59ff:fe6e:1f8b%re0 prefixlen 64 scopeid 0x2
	media: Ethernet autoselect (1000baseT <full-duplex>)
	status: active
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
enc0: flags=0 metric 0 mtu 1536
	options=0
	groups: enc
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
lo0: flags=1008049<UP,LOOPBACK,RUNNING,MULTICAST,LOWER_UP> metric 0 mtu 16384
	options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
	inet 127.0.0.1 netmask 0x0
	inet6 ::1 prefixlen 128
	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4
	groups: lo
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
pflog0: flags=100<PROMISC> metric 0 mtu 33152
	options=0
	groups: pflog
pfsync0: flags=0 metric 0 mtu 1500
	options=0
	maxupd: 128 defer: off version: 1400
	syncok: 1
	groups: pfsync
ovpns1: flags=1008043<UP,BROADCAST,RUNNING,MULTICAST,LOWER_UP> metric 0 mtu 1500
	options=80000<LINKSTATE>
	inet 10.0.8.1 netmask 0xffffff00 broadcast 10.0.8.255
	inet6 fe80::aaa1:59ff:fe6e:1f8b%ovpns1 prefixlen 64 scopeid 0x7
	groups: tun openvpn
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
	Opened by PID 54760

eiger3970 0

@eiger3970-0 Just noticed the computer said Wired Lan cable was unplugged.
I barely touched the Ethernet cable at the back and the RJ45 NIC PCIe LED turned on and green.
I guess that's the LAN enp2s0 that changed from DOWN to UP.
Must be something wrong with the NIC, the NIC's insertion into the MOBO or the cable...nothing was touched before the problem.

JonathanLee

Your gateway isn’t .1 ?

eiger3970 0

@JonathanLee This is solved, somehow, I don't remember...just noting the thread can be closed.