Captive Portal Freeradius With CCTV
-
Hi,
I hope this message finds you well.
I'm experiencing a significant issue with my pfSense firewall and would appreciate your assistance. Briefly, in my network topology, PC1 has access only to the internet and the cameras. I connect to the network using Freeradius with Mac Authentication and have set a limited data usage (e.g., 2048 MB) for internet access.
So far, there have been no issues, and the internet usage amount is correctly calculated in Status > System Logs > System > General. However, when I connect to the cameras, the data usage is calculated together with internet usage, Playback, and Liveview.
Despite having configured the Role settings correctly in the firewall, the issue persists and is not working as expected.
If anyone has experience with this issue or can provide a solution, I would greatly appreciate it. Thank you in advance for your help and cooperation.
Best regards,
-
I saw your network diagram.
Normally, afaik, captive portal users are non-trusted users.
Cameras, normally should be made accessible for trusted users.
Try this : declare every camera as a host in one of these :
so no portal access rule (and counters) are used to access the cameras ?
(I'm not sure but easy to try out ) -
This post is deleted!
