Wireguard Routing on the same tunnel
-
Hi Everyone I have a Network setup as follows
Site A is our entry point via wireguard using 1 tunnel
LAN Subnet 10.10.1.0/24
WG Tunnel Subnet: 10.10.2.0/24Site B
LAN Subnet: 10.11.0.0/24
WG IP Address: 10.10.2.2currently anything that is on 10.10.1.0/24 can reach anything on 10.11.0.0/24 and vice-versa,
The Wireguard clients are able to reach anything that is on 10.10.1.0/24 which is the LAN on Site A however they can't reach anything on 10.11.0.0/24 even though we have a FW rule on both PFsense routers that allow for any traffic coming in on the Wireguard Subnet
In our testing we noticed that PFsense is unable to ping the Wireguard interface IP on the same machine and can't seem to figure out what rule we need to add to allow this sort of connection