My config info to help ID the reason for DHCP not working

[ccgc]

Re: Netgate to Netgear config - VLANs cannot get DHCP or connect to the internet
Pls see images to follow

Netgate config

Port 48 is the uplink from netgear to netgate

Port 48 VLAN Tag is 1,20

[Gblenn]

@ccgc Here's where I think you got it wrong. If port 48 is attached to pfsense, then that port needs to have any and all VLAN ports as Tagged, not Untagged.

[ccgc]

@Gblenn
Thanks for your reply. I tried changing that but it still is not handing out DHCPs. Any other thoughts?
Thanks again,
Leon

[Gblenn]

@ccgc I also notice now that on this view, you have all the ports 1-8 Tagged instead of Untagged?

Did you follow this guide?

https://kb.netgear.com/31026/How-to-configure-a-VLAN-on-a-NETGEAR-managed-switch

And you really don't have to do anything with VLAN 1, except remove it from the ports you want to have as access ports for VLAN 20 (VIDEO).

And of course, VIDEO has to have a different subnet range than LAN. So if VIDEO has 192.168.0.1/24 you have to use something other than 192.168.0.