Is this hardware sufficient for PFSense for a multi-gig 5Gig/5Gig connection?
-
Hello,
I have PFSense virtualized with Proxmox. The proxmox host has the following specs:
- 2x E5-2643 CPUs @ 3.30GHz
- 512GB ECC RAM
- 10TB Storage
The PF Sense VM has been configured as follows:
- 1 CPU with 8 Cores allocated, highest priority VM - set to Host CPU instead of emulating a CPU type.
- 16GB dedicated (non balooned) RAM
- 128 GB Hard Disk
- Intel X550-T2 NIC passed thru directly to the VM for the WAN connection
- Intel X540-T2 NIC passed thur directly tot he VM for the LAN connection
Speeds struggle - I get around 2500 Down and 2800 Up. If I connect directly to the ISP modem, I get 4500down and 4500 up on average.
The ISP does not use PPPoE, it's a /29 static block.
Is there a configuration issue or does the hardware as it's configured not support this speed? If it's a hardware issue, is there a lower priced small form factor computer that'll do better?
Thanks
-
@jprez1980
Proxmox is kvm and is hardly the speed curlpitTry narrowing down the tests with iperf3
Test pf to lan and then with two hosts one in wan and one on lan, iperf traffic via pf
and see what speeds you get.
Since you have passed thru the cards you can't test them at the proxmox level.
which would be also something to test.