Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    [solved] Question regarding MIM: Controller not having a static *public* IP possible?

    Plus 24.11 RC Snapshots
    3
    36
    647
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Bob.DigB
      Bob.Dig LAYER 8 @stephenw10
      last edited by

      @stephenw10 Status is still unknown. But the second part is interesting. So when my public IP is finally changing, then I can not test this anymore because the registration data is not changing?

      1 Reply Last reply Reply Quote 0
      • stephenw10S
        stephenw10 Netgate Administrator
        last edited by

        With status unknown like that the client has never connected back to the controller. So the traffic is probably blocked somewhere because it looks like it's trying to connect.

        Currently the client connects back to the 'server' using only the IP address(es) passed to it in the registration data. So if the server side changes IP the connection will fail. Thus only static IPs are really supported for that side. But FQDN support is coming.

        Bob.DigB 2 Replies Last reply Reply Quote 0
        • Bob.DigB
          Bob.Dig LAYER 8 @stephenw10
          last edited by

          @stephenw10 But it is not blocked, you can see that in the last picture I posted. It can talk to the MIM Port on my (private) WAN-IP at home, just saying.

          1 Reply Last reply Reply Quote 0
          • Bob.DigB
            Bob.Dig LAYER 8 @stephenw10
            last edited by Bob.Dig

            @stephenw10 Maybe it all is related to this?
            Screenshot 2024-11-08 200050.png
            Is this a timeout message? That VPS is horrible slow. Or there is an activation problem?

            Log on Client

            Nov 8 20:30:52 pfnet-controller 71929 797876 [/var/run/pfnet-controller.sock] GET /api/device/controller (DONE 129.606ms) OK: success
            Nov 8 20:30:52 pfnet-controller 71929 797876 [/var/run/pfnet-controller.sock] GET /api/device/controller
            Nov 8 20:30:48 pfnet-controller 71929 INFO Applying changes into config.xml
            Nov 8 20:30:48 pfnet-controller 71929 711767 [/var/run/pfnet-controller.sock] DELETE /api/config/system/captiveportalbackup (DONE 5.991ms) ERROR: (*urlhandler.HandlerError) 400 not found
            Nov 8 20:30:48 pfnet-controller 71929 698279 [/var/run/pfnet-controller.sock] DELETE /api/config/system/logsbackup (DONE 0.958ms) ERROR: (*urlhandler.HandlerError) 400 not found
            Nov 8 20:30:48 pfnet-controller 71929 666789 [/var/run/pfnet-controller.sock] DELETE /api/config/system/dhcpbackup (DONE 1.080ms) ERROR: (*urlhandler.HandlerError) 400 not found
            Nov 8 20:30:48 pfnet-controller 71929 657424 [/var/run/pfnet-controller.sock] DELETE /api/config/system/rrdbackup (DONE 1.353ms) ERROR: (*urlhandler.HandlerError) 400 not found
            Nov 8 20:30:48 pfnet-controller 71929 401318 [/var/run/pfnet-controller.sock] DELETE /api/config/system/use_mfs_tmpvar (DONE 0.999ms) ERROR: (*urlhandler.HandlerError) 400 not found
            Nov 8 20:30:48 pfnet-controller 71929 344427 [/var/run/pfnet-controller.sock] DELETE /api/config/system/dpinger_dont_add_static_routes (DONE 1.147ms) ERROR: (*urlhandler.HandlerError) 400 not found
            Nov 8 20:30:48 pfnet-controller 71929 129633 [/var/run/pfnet-controller.sock] DELETE /api/config/system/keep_failover_states (DONE 1.041ms) ERROR: (*urlhandler.HandlerError) 400 not found
            Nov 8 20:30:48 pfnet-controller 71929 112933 [/var/run/pfnet-controller.sock] DELETE /api/config/system/remove_failover_states_default (DONE 1.065ms) ERROR: (*urlhandler.HandlerError) 400 not found
            Nov 8 20:30:48 pfnet-controller 71929 96084 [/var/run/pfnet-controller.sock] DELETE /api/config/system/schedule_states (DONE 1.204ms) ERROR: (*urlhandler.HandlerError) 400 not found
            Nov 8 20:30:48 pfnet-controller 71929 36961 [/var/run/pfnet-controller.sock] DELETE /api/config/system/pti_disabled (DONE 1.457ms) ERROR: (*urlhandler.HandlerError) 400 not found
            Nov 8 20:30:47 pfnet-controller 71929 936446 [/var/run/pfnet-controller.sock] DELETE /api/config/system/thermal_hardware (DONE 1.333ms) ERROR: (*urlhandler.HandlerError) 400 not found
            Nov 8 20:30:47 pfnet-controller 71929 926102 [/var/run/pfnet-controller.sock] DELETE /api/config/system/ipsec_mb (DONE 1.064ms) ERROR: (*urlhandler.HandlerError) 400 not found
            Nov 8 20:30:47 pfnet-controller 71929 914451 [/var/run/pfnet-controller.sock] DELETE /api/config/system/crypto_hardware (DONE 1.378ms) ERROR: (*urlhandler.HandlerError) 400 not found
            Nov 8 20:30:47 pfnet-controller 71929 566861 [/var/run/pfnet-controller.sock] DELETE /api/config/system/watchdogd_enable (DONE 1.040ms) ERROR: (*urlhandler.HandlerError) 400 not found
            Nov 8 20:30:47 pfnet-controller 71929 460392 [/var/run/pfnet-controller.sock] DELETE /api/config/system/powerd_enable (DONE 1.268ms) ERROR: (*urlhandler.HandlerError) 400 not found
            Nov 8 20:30:47 pfnet-controller 71929 451874 [/var/run/pfnet-controller.sock] DELETE /api/config/system/block_external_services (DONE 1.173ms) ERROR: (*urlhandler.HandlerError) 400 not found
            Nov 8 20:30:47 pfnet-controller 71929 437248 [/var/run/pfnet-controller.sock] DELETE /api/config/system/do_not_send_uniqueid (DONE 1.890ms) ERROR: (*urlhandler.HandlerError) 400 not found
            Nov 8 20:30:47 pfnet-controller 71929 416491 [/var/run/pfnet-controller.sock] DELETE /api/config/system/lb_use_sticky (DONE 1.015ms) ERROR: (*urlhandler.HandlerError) 400 not found
            Nov 8 20:30:47 pfnet-controller 71929 407598 [/var/run/pfnet-controller.sock] DELETE /api/config/system/proxypass (DONE 1.380ms) ERROR: (*urlhandler.HandlerError) 400 not found
            Nov 8 20:30:47 pfnet-controller 71929 402921 [/var/run/pfnet-controller.sock] DELETE /api/config/system/proxyuser (DONE 1.004ms) ERROR: (*urlhandler.HandlerError) 400 not found
            Nov 8 20:30:47 pfnet-controller 71929 397833 [/var/run/pfnet-controller.sock] DELETE /api/config/system/proxyport (DONE 0.944ms) ERROR: (*urlhandler.HandlerError) 400 not found
            Nov 8 20:30:47 pfnet-controller 71929 391868 [/var/run/pfnet-controller.sock] DELETE /api/config/system/proxyurl (DONE 1.263ms) ERROR: (*urlhandler.HandlerError) 400 not found
            Nov 8 20:30:47 pfnet-controller 71929 328168 [/var/run/pfnet-controller.sock] DELETE /api/config/system/harddiskstandby (DONE 23.195ms) ERROR: (*urlhandler.HandlerError) 400 not found

            1 Reply Last reply Reply Quote 0
            • stephenw10S
              stephenw10 Netgate Administrator
              last edited by

              Hmm, so the client is connecting out to the controller at the correct public IP but it never arrives at the controller?

              Bob.DigB 1 Reply Last reply Reply Quote 0
              • Bob.DigB
                Bob.Dig LAYER 8 @stephenw10
                last edited by

                @stephenw10 It is working now! Most probably the VM needed more RAM than I thought. It had only 512 MB before. I will mark this solved.

                Bob.DigB 1 Reply Last reply Reply Quote 1
                • Bob.DigB
                  Bob.Dig LAYER 8 @Bob.Dig
                  last edited by

                  Today it is not working anymore but also there was the first IP change on my side. Doing some port magic didn't helped. So if I am able to, I will host the controller on a second instance in the cloud (with a static IP).

                  1 Reply Last reply Reply Quote 1
                  • Bob.DigB
                    Bob.Dig LAYER 8
                    last edited by Bob.Dig

                    Maybe some last thought about this in this thread. I now had the chance to use a third Plus-Installation, it is on a VPS (2) too.
                    It worked right away to register it to the controller at home, while the other VPS (1) still didn't worked.

                    I then removed all peers and toggled the controller on all instances and registered all peers to the controller on VPS 2. This worked out of the box. There is not much difference on those two VPS other than that VPS 1 is very slow and that VPN connections towards the pfSense at home differs.

                    One problem I noticed with that new setup (on VPS 2) is that VPS 1 is still trying to connect at every second towards Home over one WireGuard tunnel. And I can't stop it other than blocking it. I will open another thread about this.

                    1 Reply Last reply Reply Quote 0
                    • Bob.DigB
                      Bob.Dig LAYER 8
                      last edited by Bob.Dig

                      OT but didn't deserve its own thread I think: On 24.11-RC I noticed that on an installation (with 1 Gig RAM) the pfnet-controller Service wasn't running. I did a reboot, saw the same thing again. Starting it manually works. That controller is the actual controller of two other instances.
                      Only thing I noticed:

                      Screenshot 2024-11-14 115537.png

                      No problem with my main-machine though. The service is running but it is not the controller of other instances.

                      1 Reply Last reply Reply Quote 0
                      • M
                        marcosm Netgate
                        last edited by

                        Are the logs any different if you increase the log level?

                        Bob.DigB 1 Reply Last reply Reply Quote 0
                        • Bob.DigB
                          Bob.Dig LAYER 8 @marcosm
                          last edited by Bob.Dig

                          @marcosm Not really.

                          Nov 14 17:07:10 	kernel 		controltun0: link state changed to DOWN 

                          Nov 14 17:07:09 	pfnet-controller 	57413 	controltun0 packet from 185.*.*.*:*
Nov 14 17:07:09 	pfnet-controller 	57413 	Unknown peerId in received packet from peer 4ae627
Nov 14 17:07:09 	pfnet-controller 	57413 	NG System busy, will challenge peer
Nov 14 17:07:09 	pfnet-controller 	57413 	NG Handshake received from 185.*.*.*:*
Nov 14 17:07:09 	pfnet-controller 	57413 	controltun0 packet from 185.*.*.*:*
Nov 14 17:07:09 	pfnet-controller 	57413 	Unknown peerId in received packet from peer 4ae627

                          Nothing after that for the MIM log.

                          That IP is my very slow instance...

                          1 Reply Last reply Reply Quote 0
                          • M
                            marcosm Netgate
                            last edited by marcosm

                            Would you please reproduce the issue, generate diagnostic data while it's still stopped, and upload it here?

                            Also, are there any interesting logs from the client(s) when that happens?

                            Bob.DigB 1 Reply Last reply Reply Quote 0
                            • Bob.DigB
                              Bob.Dig LAYER 8 @marcosm
                              last edited by Bob.Dig

                              @marcosm said in [solved] Question regarding MIM: Controller not having a static *public* IP possible?:

                              Would you please reproduce the issue

                              Done. This time even more services hadn't started... It is a VPS in the oracle cloud with just 1 GB RAM.

                              Edit2: Now it stopped again, I can't even get it working... While I see it now is supporting DDNS, I haven't used that and it is way less stable. Maybe I am supposed to make a new config(db) for it? No, latter doesn't change anything.

                              And on my main machine at home I have a WireGuard problem it seems, service isn't running although most of the tunnels do... And I see this, not the first time.

                              Screenshot 2024-11-15 092241.png

                              So I guess I am looking forward to an all new Install-Image to start over... At least CrystalDiskInfo isn't showing any problems. 🙄

                              Edit: A Reboot fixed this for my main machine, still, I have never seen this before on it. Also did a RAM-check, no problems found.

                              1 Reply Last reply Reply Quote 0
                              • stephenw10S
                                stephenw10 Netgate Administrator
                                last edited by

                                You should be able to install the RC directly with Net Installer if that's an option for you.

                                Bob.DigB 1 Reply Last reply Reply Quote 1
                                • Bob.DigB
                                  Bob.Dig LAYER 8 @stephenw10
                                  last edited by Bob.Dig

                                  @stephenw10 said in [solved] Question regarding MIM: Controller not having a static *public* IP possible?:

                                  You should be able to install the RC directly with Net Installer if that's an option for you.

                                  I will do this with the final release. And reboot fixed all problems with my home installation for now. It might just be a problem with FreeBSD on ZFS on Hyper-V on NTFS. 😉

                                  1 Reply Last reply Reply Quote 1
                                  • M
                                    marcosm Netgate
                                    last edited by

                                    The failing SCSI commands are telling. I've experienced similar issues before with VMs running on NFS shares. IMO the issue there is storage. I wouldn't trust it even with reinstalls.

                                    Bob.DigB 1 Reply Last reply Reply Quote 0
                                    • Bob.DigB
                                      Bob.Dig LAYER 8 @marcosm
                                      last edited by Bob.Dig

                                      @marcosm Something seems odd to me with me the RC. I did an "offline" disk check in Windows, no problems found. After rebooting the host, the pfSense VM didn't boot fully, or to be more precise, not all services where loaded and a message said, that boot verification hasn't completed. And because it didn't, I disabled MIM and rebooted the Host again. This time everything went well and no problems at all.
                                      So this behavior I only have seen with the RC, now at home and before in the oracle cloud... I will disable MIM on all machines and have a look if these problems are related to it...

                                      @marcosm said in [solved] Question regarding MIM: Controller not having a static *public* IP possible?:

                                      I wouldn't trust it even with reinstalls.

                                      I will let you know if you where right. 😉

                                      1 Reply Last reply Reply Quote 0
                                      • M
                                        marcosm Netgate
                                        last edited by

                                        If you're referring to the message:

                                        Automatic boot verification is still running - wait a moment for boot to complete.

                                        You'll need to wait for the boot process to finish. The GUI becomes available before all services are ready.

                                        Bob.DigB 1 Reply Last reply Reply Quote 0
                                        • Bob.DigB
                                          Bob.Dig LAYER 8 @marcosm
                                          last edited by Bob.Dig

                                          @marcosm said in [solved] Question regarding MIM: Controller not having a static *public* IP possible?:

                                          You'll need to wait for the boot process to finish. The GUI becomes available before all services are ready.

                                          Yeah, I did but it didn't.

                                          1 Reply Last reply Reply Quote 0
                                          • stephenw10S
                                            stephenw10 Netgate Administrator
                                            last edited by

                                            Does it show 'bootup complete' at the console? If not how far does it get?

                                            Bob.DigB 1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post