Thank you franklookyou for this tuto
Hello, It is very interesting and I would like to apply this method to my network.
However, I have some problems to obtain the good result, I think that it comes from my IP addressing and from my tables of routing, can you help me.
Here is my plan:
Vpn : 184.108.40.206/24
Wan : 220.127.116.11/29 ( Not the choice for this address)
Lan : 10.0.0.0/8
Vlan1 : 192.168.1.0/24
Using this tutorial, I have pushed roads server side like this:
Route 192.168.0.0 255.255.0.0 ;push « route 18.104.22.168 255.255.255.248 »
And client side like that :
Client1 : iroute 192.168.1.0 255.255.255.0
Client2 : iroute 192.168.2.0 255.255.255.0
Client3 : …..
I wish the roadwarrior VPN’s clients can connect on their own VLANs without reaching the other VLANs.
Can you help me?