After upgrade 24.03 to 24.11 reboot hangs at start @ 0xffffff....

GripePotato

@jackyaz said in After upgrade 24.03 to 24.11 reboot hangs at start @ 0xffffff....:

Netgate 4200 MAX

I also experience the problem with a Netgate 4200 MAX (vice 6100 MAX I reported earlier).

GripePotato

This thread indicates two types of devices experience problems:

Pfsense on VM
4200 MAX

The VM folks got a solution/recommendation of attaching a serial port to the VM. Is there a recommendation for the 4200 MAX other than trying again? I've tried a couple times already, both resulting in failure.

stephenw10

Still unable to replicate this locally.

Is there anything about those devices that might be unique? Perhaps you made a BIOS setting change? Have something unusual connected to it?

jackyaz

@stephenw10 No BIOS changes on my side, never even been into the BIOS!

I do have a USB cable plugged into the USB A port on the side but the other end is disconnected - I'll occasionally need to use my phone as a USB tethering modem when my fibre drops out. I can try unplugging it to see if that makes a difference? I'd be surprised if it does considering its not connected to anything!

stephenw10

Mmm, me too. It certainly shouldn't make any difference. Might be worth trying to rule it out though.

GripePotato

@stephenw10
My 4200 MAX is off the shelf with no special (e.g. BIOS) changes and nothing unusual (e.g. USB) plugged in.

jimp

@GripePotato said in After upgrade 24.03 to 24.11 reboot hangs at start @ 0xffffff....:

This thread indicates two types of devices experience problems:

Pfsense on VM

4200 MAX

The VM folks got a solution/recommendation of attaching a serial port to the VM. Is there a recommendation for the 4200 MAX other than trying again? I've tried a couple times already, both resulting in failure.

The VM issue was quite a bit different and unrelated to what's happening on the 4200, which still isn't clear.

As for the 4200, nobody has yet been able to capture the whole boot process on a system affected by the problem (See my request in https://forum.netgate.com/post/1197950 ) -- the other person who tried ended up having a successful upgrade on their next attempt.

So if you could, try the upgrade again and capture the whole next boot output from the serial console and attach it here (or send it via TAC).

It may also be worth checking to make sure you have /boot/loader.conf.lua present with appropriate content. Also make sure you have the pfSense, pfSense-plus, and pfSense-boot OS packages installed before upgrading. Check pkg info -x pfSense to see if they are in the list.

jackyaz

@jimp my output is literally all that's displayed, other than the loader menu. There's no other output whatsoever

jimp

@jackyaz said in After upgrade 24.03 to 24.11 reboot hangs at start @ 0xffffff....:

@jimp my output is literally all that's displayed, other than the loader menu. There's no other output whatsoever

I mean before that. The rest of the POST that happens from power on until it reaches the menu before it tries to boot the kernel. You're saying there is nothing else at all?

There should be output like:

Version 2.22.1285. Copyright (C) 2024 AMI                                       
BIOS Date: 02/01/2024 15:18:05 Ver: 2AZRT81                                     
Press <DEL> or <ESC> to enter setup. 

Consoles: EFI console  
    Reading loader env vars from /efi/freebsd/loader.env
Setting currdev to disk0p1:
FreeBSD/amd64 EFI loader, Revision 3.0
(Sun Dec 15 16:14:26 UTC 2024 root@freebsd)

   Command line arguments: loader.efi
   Image base: 0x54a1b000
   EFI version: 2.80
   EFI Firmware: American Megatrends (rev 5.26)
   Console: efi (0x1000)
   Load Path: \efi\freebsd\loader.efi
   Load Device: PciRoot(0x0)/Pci(0x14,0x0)/USB(0x5,0x0)/HD(1,GPT,FAE2512E-DA37-11EE-B8CE-0008A212EC83,0x28,0x82000)
   BootCurrent: 0001
   BootOrder: 0001[*] 000c 0003 0004 0005 0006 0007 0008 0009 000a
   BootInfo Path: HD(1,GPT,FAE2512E-DA37-11EE-B8CE-0008A212EC83,0x28,0x82000)/\efi\freebsd\loader.efi
Ignoring Boot0001: Only one DP found
Trying ESP: PciRoot(0x0)/Pci(0x14,0x0)/USB(0x5,0x0)/HD(1,GPT,FAE2512E-DA37-11EE-B8CE-0008A212EC83,0x28,0x82000)
Setting currdev to disk0p1:
Trying: PciRoot(0x0)/Pci(0x14,0x0)/USB(0x5,0x0)/HD(2,GPT,FAF90874-DA37-11EE-B8CE-0008A212EC83,0x82028,0x400)
Setting currdev to disk0p2:
Trying: PciRoot(0x0)/Pci(0x14,0x0)/USB(0x5,0x0)/HD(3,GPT,FB17245C-DA37-11EE-B8CE-0008A212EC83,0x82800,0x200000)
Setting currdev to disk0p3:
Trying: PciRoot(0x0)/Pci(0x14,0x0)/USB(0x5,0x0)/HD(4,GPT,FB36C0A0-DA37-11EE-B8CE-0008A212EC83,0x282800,0x1AB1000)
Loading /boot/defaults/loader.confT/default_20241216101221:
Loading /boot/defaults/loader.confault:
Loading /boot/device.hints
Loading /boot/loader.conf
Loading /boot/loader.conf.lua
Netgate 4200 detected.
Loading /boot/loader.conf.local

I haven't seen anything like that in any other post in this thread, all the captures start too late in the process (menu or later)

jackyaz

@jimp I'll reboot to 24.11 tomorrow when I can get an hour's downtime in