Unable to get site-site VPN working
-
Hi
I've got a bit of a baffling problem and would appreciate some assistance.
I've set up a site-to-site VPN between two locations.
Office is 192.168.1.1/24
Home is 192.168.1.0/24Wireguard is up and running fine and I can ping devices at the office from home using the ping tool in the pfSense GUI.
Likewise, I can ping devices at home from the office using the ping tool.
However I cannot actually ping anything from either LAN. Static routes are present and correct, and traffic is even reaching the remote firewall - for example if I ping an address at home from the office, then look at Diagnostics > States on the home firewall, I can see the packets coming in.
I've followed the pfSense official guide and also Christian McDonald's YouTube video.
Would appreciate suggestions for next troubleshooting steps.
Thanks!
-
@stevelup said in Unable to get site-site VPN working:
Office is 192.168.1.1/24
Home is 192.168.1.0/24These networks are obviously overlapping.
If they are really like this you should change your home subnet to something else. -
@viragomann sorry, my apologies - that was a silly typo.
Office is 192.168.1.0/24
Home is 192.168.0.0/24 -
@stevelup I guess it's show your rules time.
