Static route on SG-2100
-
Hello,
I have OpenVPN server running on my SG-2100 firewall. I want to be able to connect from remote office's laptop to device in SG-2100 LAN network.
I have a problem adding route to access device in SG-2100 LAN network from remote laptop connected to Teltonika modem with OpenVPN client config.SG-2100 LAN: 192.168.50.0/24
OpenVPN Tunnel network: 10.10.0.0/16
Teltonika Modem Lan Network: 192.168.1.0/24
Device i want to connect: 192.168.50.101Teltonika has OpenVPN client is connected to SG-2100 OpenVPN server. The problem is that i can not connect with my laptop to 192.168.50.101 device on SG-2100 LAN network. I can only connect to 10.10.0.1 firewall.
When use Redirect IPv4 Gateway Force all client-generated IPv4 traffic through the tunnel option i can connect to 192.168.50.101 device. But i do not need this option to be enabled.
How can i add route to 192.168.50.101 device to be able to work from remote workplace without forcing all traffic through the tunnel? -
@Kaetih-Lue
Presumed, the Teltonika accepts pushed routes, you can enter the networks, you want to access at "Local Network/s" in the server settings.
If you only need this single IP enter192.168.50.101/32