no handshake unless psk is used
-
@sneakynuts said in no handshake unless psk is used:
My other 2 peers dont use a psk and they connect just fine
PSK is a per peer setting. You must have set a PSK on one side already, it wouldn't work otherwise.
-
maybe im missunderstanding then.
On both peer and pfsense, i have left the Pre-Shared Key (optional) field blank -
@sneakynuts Show all the configs of all sides of that problematic tunnel.
-
S25 peer is the one im having issues with.
pfsense side Screenshots:
From S25
-
@sneakynuts Makes no sense, that a PSK would be needed here. All your endpoints have private addresses? Try to replace MTU from 1420 to 1280.
-
Yes, all peers use the same endpoint, which is my static IP
I will try mtu change now -
@sneakynuts And don't use 10.10.10.* on pfSense, this range is used by pfBlocker.
-
No difference if i set the mtu.
I'll change the ip to 10.0.0* range
-
So, i have changed pfsense to 10.0.0.1
Galaxy Tab - 10.0.0.3
S25 - 10.0.0.5Galaxt tab works, S25 does not
-
any other suggestions on what might be the issue?
Cheers
