Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    boot failure upgrading to 25.03.b.20250306.0140 i

    Scheduled Pinned Locked Moved Plus 25.07 Develoment Snapshots
    65 Posts 7 Posters 6.6k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • N
      netblues
      last edited by netblues

      Did a cli upgrade from 24.11 release on amd64(kvm)
      Ended up in this

      4a77c76c-d305-4c89-a395-695210c6e673-image.png
      108a11f9-a0a6-4d8f-9831-59b9f71f5af9-image.png
      56bccf9f-2fec-4473-a74b-0e245faef5f7-image.png

      Disk is
      c78e2846-137d-4044-9622-d35bbc18a3f0-image.png

      System reboots manually to previous version.
      This is repeatable, already tried 3 times.

      Didn't notice any obvious errors, system downloads new packages.
      Any pointers to debug this more than welcome

      It seems it is virtio related.
      Changing from virtio to sata allowed the system to move further
      and then ended up with no network interfaces found.
      Upgrade did not complete and reverted to 24.11

      Most probably didn't like virtio ethernet driver too.

      JonathanLeeJ 1 Reply Last reply Reply Quote 0
      • JonathanLeeJ
        JonathanLee @netblues
        last edited by

        @netblues I run a mpcie to NVMe drive on my 2100, long story short anything that did not officially come with the 2100 you need to disconnect and let the install run after reattach your custom hardware.

        Make sure to upvote

        N 1 Reply Last reply Reply Quote 0
        • N
          netblues @JonathanLee
          last edited by netblues

          @JonathanLee
          This was definitely not the case for the previous updates.

          Actually it disconnected everything, didn't find an interface, refused to proceed
          and reverted.
          Nice approach.

          So you suggest changing all the emulated interfaces to e1000, rebooting
          upgrading, and MAYBE , changing back will work?

          Virtio was a supported interface till 24.11
          Did't see any support drop anywhere too.

          and now pf managed to also report it
          Boot verification failed for default_20240714144502_20250329075912. Netgate pfSense Plus was automatically rebooted back into default_20240714144502_20250329075912_20250329082412. @ 2025-03-29 08:28:37

          JonathanLeeJ 2 Replies Last reply Reply Quote 0
          • JonathanLeeJ
            JonathanLee @netblues
            last edited by

            @netblues my NVMe worked on 23.05 stuff changes … they remove stuff add stuff all the time. Give it a try what’s the worst that can happen you use an old boot environment ?

            Make sure to upvote

            N 1 Reply Last reply Reply Quote 0
            • JonathanLeeJ
              JonathanLee @netblues
              last edited by

              @netblues your running this as a virtual machine ??

              Make sure to upvote

              1 Reply Last reply Reply Quote 0
              • N
                netblues @JonathanLee
                last edited by

                @JonathanLee

                Its changing hardware options on kvm. And I'm running vlans at the kvm level.
                so its a lot. And most probably this will invalidate registration (again).

                I need a test license for this to test under virtio/kvm.

                JonathanLeeJ 1 Reply Last reply Reply Quote 0
                • JonathanLeeJ
                  JonathanLee @netblues
                  last edited by

                  @netblues interesting .. sounds like fun

                  Make sure to upvote

                  patient0P 1 Reply Last reply Reply Quote 1
                  • patient0P
                    patient0 @JonathanLee
                    last edited by

                    @JonathanLee I run a pfSense+ ZFS-based instance on a Proxmox server using QEMU/KVM. The network interfaces are virtio device but the storage is SCSI.

                    Started with 2.7.2 CE and upgraded all the way up to 25.03-BETA 2.

                    No issue with with the virtio network interfaces.

                    N 1 Reply Last reply Reply Quote 0
                    • N
                      netblues @patient0
                      last edited by

                      @patient0
                      Well the only difference is redhat 9.5 kvm, , hardly differences.
                      It can't find the interfaces to reconfigure, and then a shutdown is initiated.
                      After rebooting , everything works

                      ae58bd3b-ccec-4ef3-80fd-d25b486d1672-image.png

                      N 1 Reply Last reply Reply Quote 0
                      • N
                        netblues @netblues
                        last edited by netblues

                        Like issue here

                        So I'm not alone.

                        1 Reply Last reply Reply Quote 0
                        • stephenw10S
                          stephenw10 Netgate Administrator
                          last edited by

                          Hmm, I have a number of KVM/Proxmox VMs running virtio NICs and disks without a problem.

                          It clearly boots the kernel OK though. Are there any errors in the boot log?

                          N 1 Reply Last reply Reply Quote 0
                          • N
                            netblues @stephenw10
                            last edited by

                            @stephenw10 It boots the kernel only after changing the driver to sata.
                            If it is virtio it can't find any volume.
                            Changing everything to e1000 kicks in the deadly interface reconfiguration script
                            (which if I do it will work, since interfaces are detected.)

                            On the same kvm, a ce 2.7.2 works happily with virtio,
                            What do you need from logs?

                            1 Reply Last reply Reply Quote 0
                            • stephenw10S
                              stephenw10 Netgate Administrator
                              last edited by

                              Oh so where does it stop if the drive is set to virtio?

                              The logs above show it booting the kernel but then failing to find the rive mount root from. The logs leading up to that would usually have device detection etc and might have error output.

                              N 1 Reply Last reply Reply Quote 0
                              • N
                                netblues @stephenw10
                                last edited by

                                @stephenw10 Yes, this is also my understanding. Apart from console output, how this logs can be salvaged?

                                1 Reply Last reply Reply Quote 0
                                • stephenw10S
                                  stephenw10 Netgate Administrator
                                  last edited by

                                  If it was me I would just enable a virtual serial port and connect to it through the hypervisor. But you do need to enable it in pfSense and set it as primary console.

                                  Otherwise, yes, just scroll back and look for error in the video console.

                                  N 1 Reply Last reply Reply Quote 0
                                  • N
                                    netblues @stephenw10
                                    last edited by

                                    @stephenw10 I'll try my (serial) luck, and post the findings. (when the home is asleep)

                                    N 1 Reply Last reply Reply Quote 1
                                    • N
                                      netblues @netblues
                                      last edited by netblues

                                      changed hdd to virtio, attached console, and tried upgrading
                                      Didn't catch anything strange (to my knowledge that is)

                                      Please press any key to reboot.



/boot/config: -S115200 -D

Consoles: internal video/keyboard  serial port
BIOS drive C: is disk0
BIOS 639kB/2095968kB available memory

FreeBSD/x86 bootstrap loader, Revision 3.0
(Thu Mar  6 02:16:12 UTC 2025 root@freebsd)
Loading /boot/defaults/loader.conf
Loading /boot/defaults/loader.conf
Loading /boot/device.hints
Loading /boot/loader.conf
Loading /boot/loader.conf.lua
Loading /boot/loader.conf.local
\
|          __
    _ __  / _|___  ___ _ __  ___  ___      _
   | '_ \| |_/ __|/ _ \ '_ \/ __|/ _ \   _| |_
   | |_) |  _\__ \  __/ | | \__ \  __/  |_   _|
   | .__/|_| |___/\___|_| |_|___/\___|    |_|
   |_|


 +---- Welcome to Netgate pfSense Plus ----+      __________________________
 |                                         |     /                       ___\
 |  1. Boot Multi user [Enter]             |    |                      /`
 |  2. Boot Single user                    |    |                     /    :-|
 |  3. Escape to loader prompt             |    |      _________  ___/    /_ |
 |  4. Reboot                              |    |    /` ____   / /__    ___/ |
 |  5. Cons: Dual (Serial primary)         |    |   /  /   /  /    /   /     |
 |                                         |    |  /  /___/  /    /   /      |
 |  Options:                               |    | /   ______/    /   /  _    |
 |  6. Kernel: default/kernel (1 of 2)     |    |/   /          /   / _| |_  |
 |  7. Boot Options                        |        /          /___/ |_   _| |
 |  8. Boot Environments                   |       /                   |_|   |
 |                                         |      /_________________________/
 |                                         |                                  /
 +-----------------------------------------+
   Autoboot in 0 seconds. [Space] to pause
Loading kernel...
/boot/kernel/kernel text=0x1aa2b8 text=0x101e5f8 text=0xeb3700 data=0x180+0xe80 data=0x252300+0x3add00 0x8+0x1db080+0x8+0x1f217a|
Loading configured modules...
/boot/kernel/cryptodev.ko size 0x8808 at 0x2fce000
/boot/kernel/opensolaris.ko size 0x1e2a8 at 0x2fd7000
can't find '/etc/hostid'
/boot/entropy size=0x1000
/boot/kernel/zfs.ko size 0x60b278 at 0x2ff7000
GDB: no debug ports present
KDB: debugger backends: ddb
KDB: current backend: ddb
---<<BOOT>>---
Copyright (c) 1992-2024 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 15.0-CURRENT #0 plus-RELENG_25_03-n256483-08e0bace8aeb: Thu Mar  6 02:18:06 UTC 2025
    root@freebsd:/var/jenkins/workspace/pfSense-Plus-snapshots-25_03-main/obj/amd64/lpwib8GT/var/jenkins/workspace/pfSense-Plus-snapshots-25_03-main/sources/FreeBSD-src-plus-RELENG_25_03/amd64.amd64/sys/pfSense amd64
FreeBSD clang version 19.1.5 (https://github.com/llvm/llvm-project.git llvmorg-19.1.5-0-gab4b5a2db582)
VT(vga): text 80x25
CPU: Intel(R) Core(TM) i7-8700 CPU @ 3.20GHz (3192.11-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x906ea  Family=0x6  Model=0x9e  Stepping=10
  Features=0xf83fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE,SSE2,SS>
  Features2=0xfffab223<SSE3,PCLMULQDQ,VMX,SSSE3,FMA,CX16,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND,HV>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x121<LAHF,ABM,Prefetch>
  Structured Extended Features=0x9c47ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT>
  Structured Extended Features2=0x4<UMIP>
  Structured Extended Features3=0xbc000400<MD_CLEAR,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD>
  XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
  IA32_ARCH_CAPS=0xc00004c<RSBA,SKIP_L1DFL_VME>
  AMD Extended Feature Extensions ID EBX=0x100d000<IBPB,IBRS,STIBP,SSBD>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
Hypervisor: Origin = "KVMKVMKVM"
real memory  = 12884901888 (12288 MB)
avail memory = 12399108096 (11824 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <BOCHS  BXPC    >
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 8 package(s) x 1 core(s)
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
random: unblocking device.
ioapic0 <Version 1.1> irqs 0-23
Launching APs: 5 3 1 6 7 2 4
TCP_ratelimit: Is now initialized
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff80760600, 0) error 1
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff807606b0, 0) error 1
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff80760760, 0) error 1
iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff8077fdd0, 0) error 1
iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff8077fe80, 0) error 1
iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff8077ff30, 0) error 1
random: entropy device external interface
wlan: mac acl policy registered
kbd1 at kbdmux0
WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0.
netgate0: <KVM Guest>
netgate0: version: 0.1
vtvga0: <VT VGA driver>
kvmclock0: <KVM paravirtual clock>
Timecounter "kvmclock" frequency 1000000000 Hz quality 975
kvmclock0: registered as a time-of-day clock, resolution 0.000001s
smbios0: <System Management BIOS> at iomem 0xf5310-0xf532e
smbios0: Version: 2.8, BCD Revision: 2.8
acpi0: <BOCHS BXPC>
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x608-0x60b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> mem 0xfea10000-0xfea10fff irq 21 at device 1.0 on pci0
pcib2: <ACPI PCI-PCI bridge> mem 0xfea11000-0xfea11fff irq 21 at device 1.1 on pci0
pcib3: <ACPI PCI-PCI bridge> mem 0xfea12000-0xfea12fff irq 21 at device 1.2 on pci0
pcib4: <ACPI PCI-PCI bridge> mem 0xfea13000-0xfea13fff irq 21 at device 1.3 on pci0
pcib5: <ACPI PCI-PCI bridge> mem 0xfea14000-0xfea14fff irq 21 at device 1.4 on pci0
pcib6: <ACPI PCI-PCI bridge> mem 0xfea15000-0xfea15fff irq 21 at device 1.5 on pci0
pcib7: <ACPI PCI-PCI bridge> mem 0xfea16000-0xfea16fff irq 21 at device 1.6 on pci0
pcib8: <ACPI PCI-PCI bridge> mem 0xfea17000-0xfea17fff irq 21 at device 1.7 on pci0
vgapci0: <VGA-compatible display> mem 0xfa000000-0xfbffffff,0xfea18000-0xfea18fff at device 2.0 on pci0
vgapci0: Boot video device
virtio_pci0: <VirtIO PCI (modern) VSOCK Transport adapter> mem 0xfea19000-0xfea19fff,0x70b0000000-0x70b0003fff irq 23 at device 3.0 on pci0
pcib9: <ACPI PCI-PCI bridge> mem 0xfea1a000-0xfea1afff irq 20 at device 4.0 on pci0
pcib10: <ACPI PCI-PCI bridge> mem 0xfea1b000-0xfea1bfff irq 20 at device 4.1 on pci0
pcib11: <ACPI PCI-PCI bridge> mem 0xfea1c000-0xfea1cfff irq 20 at device 4.2 on pci0
uhci0: <Intel 82801I (ICH9) USB controller> port 0xc0c0-0xc0df irq 21 at device 5.0 on pci0
usbus0 on uhci0
usbus0: 12Mbps Full Speed USB v1.0
uhci1: <Intel 82801I (ICH9) USB controller> port 0xc0e0-0xc0ff irq 22 at device 5.1 on pci0
usbus1 on uhci1
usbus1: 12Mbps Full Speed USB v1.0
uhci2: <Intel 82801I (ICH9) USB controller> port 0xc100-0xc11f irq 23 at device 5.2 on pci0
usbus2 on uhci2
usbus2: 12Mbps Full Speed USB v1.0
ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xfea1d000-0xfea1dfff irq 20 at device 5.7 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci0
usbus3: 480Mbps High Speed USB v2.0
virtio_pci1: <VirtIO PCI (legacy) Console adapter> port 0xc000-0xc03f mem 0xfea1e000-0xfea1efff,0x70b0004000-0x70b0007fff irq 22 at device 6.0 on pci0
vtcon0: <VirtIO Console Adapter> on virtio_pci1
virtio_pci2: <VirtIO PCI (legacy) Balloon adapter> port 0xc040-0xc07f mem 0x70b0008000-0x70b000bfff irq 20 at device 8.0 on pci0
vtballoon0: <VirtIO Balloon Adapter> on virtio_pci2
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel ICH9 AHCI SATA controller> port 0xc120-0xc13f mem 0xfea1f000-0xfea1ffff irq 16 at device 31.2 on pci0
ahci0: AHCI v1.00 with 6 1.5Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
acpi_syscontainer0: <System Container> on acpi0
acpi_syscontainer1: <System Container> port 0xcd8-0xce3 on acpi0
acpi_syscontainer2: <System Container> port 0x620-0x62f on acpi0
acpi_syscontainer3: <System Container> port 0xcc0-0xcd7 on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: console (115200,n,8,1)
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
WARNING: Device "psm" is Giant locked and may be deleted before FreeBSD 15.0.
psm0: model IntelliMouse Explorer, device ID 4
orm0: <ISA Option ROM> at iomem 0xea000-0xeffff pnpid ORM0000 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff pnpid PNP0900 on isa0
attimer0: <AT timer> at port 0x40 on isa0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounters tick every 10.000 msec
ugen1.1: <Intel UHCI root HUB> at usbus1
ugen2.1: <Intel UHCI root HUB> at usbus2
ugen0.1: <Intel UHCI root HUB> at usbus0
uhub0 on usbus1
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen3.1: <Intel EHCI root HUB> at usbus3
uhub1 on usbus2
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
uhub2 on usbus3
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
uhub3 on usbus0
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Trying to mount root from zfs:pfSense/ROOT/default_20240714144502_20250329075912_20250329082412_20250329142348_20250401180456 []...
uhub1: 2 ports with 2 removable, self powered
uhub0: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
Root mount waiting for: usbus3 CAM
Root mount waiting for: usbus3 CAM
uhub2: 6 ports with 6 removable, self powered
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Solaris: NOTICE: Cannot find the pool label for 'pfSense'
Mounting from zfs:pfSense/ROOT/default_20240714144502_20250329075912_20250329082412_20250329142348_20250401180456 failed with error 5; retrying for 3 more seconds
Solaris: NOTICE: Cannot find the pool label for 'pfSense'
Solaris: NOTICE: Cannot find the pool label for 'pfSense'
Solaris: NOTICE: Cannot find the pool label for 'pfSense'
Solaris: NOTICE: Cannot find the pool label for 'pfSense'
Solaris: NOTICE: Cannot find the pool label for 'pfSense'
Solaris: NOTICE: Cannot find the pool label for 'pfSense'
Solaris: NOTICE: Cannot find the pool label for 'pfSense'
Solaris: NOTICE: Cannot find the pool label for 'pfSense'
Solaris: NOTICE: Cannot find the pool label for 'pfSense'
Solaris: NOTICE: Cannot find the pool label for 'pfSense'
Solaris: NOTICE: Cannot find the pool label for 'pfSense'
Solaris: NOTICE: Cannot find the pool label for 'pfSense'
Solaris: NOTICE: Cannot find the pool label for 'pfSense'
Solaris: NOTICE: Cannot find the pool label for 'pfSense'
Solaris: NOTICE: Cannot find the pool label for 'pfSense'
Solaris: NOTICE: Cannot find the pool label for 'pfSense'
Solaris: NOTICE: Cannot find the pool label for 'pfSense'
Solaris: NOTICE: Cannot find the pool label for 'pfSense'
Solaris: NOTICE: Cannot find the pool label for 'pfSense'
Solaris: NOTICE: Cannot find the pool label for 'pfSense'
Solaris: NOTICE: Cannot find the pool label for 'pfSense'
Solaris: NOTICE: Cannot find the pool label for 'pfSense'
Solaris: NOTICE: Cannot find the pool label for 'pfSense'
Solaris: NOTICE: Cannot find the pool label for 'pfSense'
Solaris: NOTICE: Cannot find the pool label for 'pfSense'
Solaris: NOTICE: Cannot find the pool label for 'pfSense'
Solaris: NOTICE: Cannot find the pool label for 'pfSense'
Solaris: NOTICE: Cannot find the pool label for 'pfSense'
Solaris: NOTICE: Cannot find the pool label for 'pfSense'
Solaris: NOTICE: Cannot find the pool label for 'pfSense'
Mounting from zfs:pfSense/ROOT/default_20240714144502_20250329075912_20250329082412_20250329142348_20250401180456 failed with error 5.

Loader variables:
  vfs.root.mountfrom=zfs:pfSense/ROOT/default_20240714144502_20250329075912_20250329082412_20250329142348_20250401180456

Manual root filesystem specification:
  <fstype>:<device> [options]
      Mount <device> using filesystem <fstype>
      and with the specified (optional) option list.

    eg. ufs:/dev/da0s1a
        zfs:zroot/ROOT/default
        cd9660:/dev/cd0 ro
          (which is equivalent to: mount -t cd9660 -o ro /dev/cd0 /)

  ?               List valid disk boot devices
  .               Yield 1 second (for background tasks)
  <empty line>    Abort manual input

mountroot>
panic: mountroot: unable to (re-)mount root.
cpuid = 7
time = 148
KDB: enter: panic
[ thread pid 1 tid 100002 ]
Stopped at      kdb_enter+0x33: movq    $0,0x1d70132(%rip)
db>
db>
                                      R 1 Reply Last reply Reply Quote 0
                                      • stephenw10S
                                        stephenw10 Netgate Administrator
                                        last edited by

                                        Hmm, so that's the first boot after upgrading?

                                        How does the drive present at that point in 24.11?

                                        N 1 Reply Last reply Reply Quote 0
                                        • N
                                          netblues @stephenw10
                                          last edited by

                                          @stephenw10 Yes it is
                                          Here is 24.11 booting with virtio disk

                                          Escape character is ^] (Ctrl + ])
Consoles: internal video/keyboard  serial port
BIOS drive C: is disk0
BIOS 639kB/2095968kB available memory

FreeBSD/x86 bootstrap loader, Revision 1.1
(Fri Nov 22 05:06:57 UTC 2024 root@freebsd)
Loading /boot/defaults/loader.conf
Loading /boot/defaults/loader.conf
Loading /boot/device.hints
Loading /boot/loader.conf
Loading /boot/loader.conf.lua
Loading /boot/loader.conf.local
|
-          __
    _ __  / _|___  ___ _ __  ___  ___      _
   | '_ \| |_/ __|/ _ \ '_ \/ __|/ _ \   _| |_
   | |_) |  _\__ \  __/ | | \__ \  __/  |_   _|
   | .__/|_| |___/\___|_| |_|___/\___|    |_|
   |_|


 +---- Welcome to Netgate pfSense Plus ----+      __________________________
 |                                         |     /                       ___\
 |  1. Boot Multi user [Enter]             |    |                      /`
 |  2. Boot Single user                    |    |                     /    :-|
 |  3. Escape to loader prompt             |    |      _________  ___/    /_ |
 |  4. Reboot                              |    |    /` ____   / /__    ___/ |
 |  5. Cons: Dual (Serial primary)         |    |   /  /   /  /    /   /     |
 |                                         |    |  /  /___/  /    /   /      |
 |  Options:                               |    | /   ______/    /   /  _    |
 |  6. Kernel: default/kernel (1 of 2)     |    |/   /          /   / _| |_  |
 |  7. Boot Options                        |        /          /___/ |_   _| |
 |  8. Boot Environments                   |       /                   |_|   |
 |                                         |      /_________________________/
 +-----------------------------------------+                                  |
   Autoboot in 0 seconds. [Space] to pause

Loading kernel...
/boot/kernel/kernel text=0x1a4c98 text=0xff3048 text=0x17ed568 data=0x180+0xe80 data=0x24c808+0x3b37f8 0x8+0x1d4108+0x8+0x1e9a19/
Loading configured modules...
/boot/kernel/zfs.ko size 0x619a40 at 0x37be000
/boot/kernel/opensolaris.ko size 0x1e2a8 at 0x3dd8000
/boot/kernel/cryptodev.ko size 0x8808 at 0x3df7000
can't find '/etc/hostid'
/boot/entropy size=0x1000
GDB: no debug ports present
KDB: debugger backends: ddb
KDB: current backend: ddb
---<<BOOT>>---
Copyright (c) 1992-2024 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 15.0-CURRENT #0 plus-RELENG_24_11-n256407-1bbb3194162: Fri Nov 22 05:08:46 UTC 2024
    root@freebsd:/var/jenkins/workspace/pfSense-Plus-snapshots-24_11-main/obj/amd64/AKWlAIiM/var/jenkins/workspace/pfSense-Plus-snapshots-24_11-main/sources/FreeBSD-src-plus-RELENG_24_11/amd64.amd64/sys/pfSense amd64
FreeBSD clang version 18.1.6 (https://github.com/llvm/llvm-project.git llvmorg-18.1.6-0-g1118c2e05e67)
VT(vga): text 80x25
CPU: Intel(R) Core(TM) i7-8700 CPU @ 3.20GHz (3192.13-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x906ea  Family=0x6  Model=0x9e  Stepping=10
  Features=0xf83fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE,SSE2,SS>
  Features2=0xfffab223<SSE3,PCLMULQDQ,VMX,SSSE3,FMA,CX16,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND,HV>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x121<LAHF,ABM,Prefetch>
  Structured Extended Features=0x9c47ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT>
  Structured Extended Features2=0x4<UMIP>
  Structured Extended Features3=0xbc000400<MD_CLEAR,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD>
  XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
  IA32_ARCH_CAPS=0xc00004c<RSBA,SKIP_L1DFL_VME>
  AMD Extended Feature Extensions ID EBX=0x100d000<IBPB,IBRS,STIBP,SSBD>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
Hypervisor: Origin = "KVMKVMKVM"
real memory  = 12884901888 (12288 MB)
avail memory = 12391612416 (11817 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <BOCHS  BXPC    >
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 8 package(s) x 1 core(s)
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
random: unblocking device.
ioapic0 <Version 1.1> irqs 0-23
Launching APs: 2 4 5 7 6 3 1
TCP_ratelimit: Is now initialized
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff807543a0, 0) error 1
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff80754450, 0) error 1
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff80754500, 0) error 1
iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff80773fb0, 0) error 1
iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff80774060, 0) error 1
iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff80774110, 0) error 1
random: entropy device external interface
wlan: mac acl policy registered
kbd1 at kbdmux0
WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0.
netgate0: <KVM Guest>
netgate0: version: 0.1
vtvga0: <VT VGA driver>
kvmclock0: <KVM paravirtual clock>
Timecounter "kvmclock" frequency 1000000000 Hz quality 975
kvmclock0: registered as a time-of-day clock, resolution 0.000001s
smbios0: <System Management BIOS> at iomem 0xf5310-0xf532e
smbios0: Version: 2.8, BCD Revision: 2.8
acpi0: <BOCHS BXPC>
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x608-0x60b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> mem 0xfea10000-0xfea10fff irq 21 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
virtio_pci0: <VirtIO PCI (modern) Block adapter> mem 0xfe800000-0xfe800fff,0x70a0000000-0x70a0003fff irq 21 at device 0.0 on pci1
vtblk0: <VirtIO Block Adapter> on virtio_pci0
vtblk0: 20480MB (41943040 512 byte sectors)
pcib2: <ACPI PCI-PCI bridge> mem 0xfea11000-0xfea11fff irq 21 at device 1.1 on pci0
pci2: <ACPI PCI bus> on pcib2
virtio_pci1: <VirtIO PCI (modern) SCSI adapter> mem 0xfe600000-0xfe600fff,0x7090000000-0x7090003fff irq 21 at device 0.0 on pci2
vtscsi0: <VirtIO SCSI Adapter> on virtio_pci1
pcib3: <ACPI PCI-PCI bridge> mem 0xfea12000-0xfea12fff irq 21 at device 1.2 on pci0
pci3: <ACPI PCI bus> on pcib3
virtio_pci2: <VirtIO PCI (modern) Network adapter> mem 0xfe440000-0xfe440fff,0x7080000000-0x7080003fff irq 21 at device 0.0 on pci3
vtnet0: <VirtIO Networking Adapter> on virtio_pci2
vtnet0: Ethernet address: 52:54:00:1c:4d:27
vtnet0: netmap queues/slots: TX 1/256, RX 1/128
000.000817 [ 452] vtnet_netmap_attach       vtnet attached txq=1, txd=256 rxq=1, rxd=128
pcib4: <ACPI PCI-PCI bridge> mem 0xfea13000-0xfea13fff irq 21 at device 1.3 on pci0
pci4: <ACPI PCI bus> on pcib4
virtio_pci3: <VirtIO PCI (modern) Network adapter> mem 0xfe240000-0xfe240fff,0x7070000000-0x7070003fff irq 21 at device 0.0 on pci4
vtnet1: <VirtIO Networking Adapter> on virtio_pci3
vtnet1: Ethernet address: 52:54:00:d0:b5:0b
vtnet1: netmap queues/slots: TX 1/256, RX 1/128
000.000821 [ 452] vtnet_netmap_attach       vtnet attached txq=1, txd=256 rxq=1, rxd=128
pcib5: <ACPI PCI-PCI bridge> mem 0xfea14000-0xfea14fff irq 21 at device 1.4 on pci0
pci5: <ACPI PCI bus> on pcib5
virtio_pci4: <VirtIO PCI (modern) Network adapter> mem 0xfe040000-0xfe040fff,0x7060000000-0x7060003fff irq 21 at device 0.0 on pci5
vtnet2: <VirtIO Networking Adapter> on virtio_pci4
vtnet2: Ethernet address: 52:54:00:a3:43:31
vtnet2: netmap queues/slots: TX 1/256, RX 1/128
000.000825 [ 452] vtnet_netmap_attach       vtnet attached txq=1, txd=256 rxq=1, rxd=128
pcib6: <ACPI PCI-PCI bridge> mem 0xfea15000-0xfea15fff irq 21 at device 1.5 on pci0
pci6: <ACPI PCI bus> on pcib6
virtio_pci5: <VirtIO PCI (modern) Network adapter> mem 0xfde40000-0xfde40fff,0x7050000000-0x7050003fff irq 21 at device 0.0 on pci6
vtnet3: <VirtIO Networking Adapter> on virtio_pci5
vtnet3: Ethernet address: 52:54:00:cc:8b:6a
vtnet3: netmap queues/slots: TX 1/256, RX 1/128
000.000829 [ 452] vtnet_netmap_attach       vtnet attached txq=1, txd=256 rxq=1, rxd=128
pcib7: <ACPI PCI-PCI bridge> mem 0xfea16000-0xfea16fff irq 21 at device 1.6 on pci0
pci7: <ACPI PCI bus> on pcib7
virtio_pci6: <VirtIO PCI (modern) Network adapter> mem 0xfdc40000-0xfdc40fff,0x7040000000-0x7040003fff irq 21 at device 0.0 on pci7
vtnet4: <VirtIO Networking Adapter> on virtio_pci6
vtnet4: Ethernet address: 52:54:00:23:c8:ba
vtnet4: netmap queues/slots: TX 1/256, RX 1/128
000.000833 [ 452] vtnet_netmap_attach       vtnet attached txq=1, txd=256 rxq=1, rxd=128
pcib8: <ACPI PCI-PCI bridge> mem 0xfea17000-0xfea17fff irq 21 at device 1.7 on pci0
pci8: <ACPI PCI bus> on pcib8
virtio_pci7: <VirtIO PCI (modern) Network adapter> mem 0xfda40000-0xfda40fff,0x7030000000-0x7030003fff irq 21 at device 0.0 on pci8
vtnet5: <VirtIO Networking Adapter> on virtio_pci7
vtnet5: Ethernet address: 52:54:00:9f:3a:04
vtnet5: netmap queues/slots: TX 1/256, RX 1/128
000.000837 [ 452] vtnet_netmap_attach       vtnet attached txq=1, txd=256 rxq=1, rxd=128
vgapci0: <VGA-compatible display> mem 0xfa000000-0xfbffffff,0xfea18000-0xfea18fff at device 2.0 on pci0
vgapci0: Boot video device
virtio_pci8: <VirtIO PCI (modern) VSOCK Transport adapter> mem 0xfea19000-0xfea19fff,0x70b0000000-0x70b0003fff irq 23 at device 3.0 on pci0
pcib9: <ACPI PCI-PCI bridge> mem 0xfea1a000-0xfea1afff irq 20 at device 4.0 on pci0
pci9: <ACPI PCI bus> on pcib9
virtio_pci9: <VirtIO PCI (modern) Network adapter> mem 0xfd840000-0xfd840fff,0x7020000000-0x7020003fff irq 20 at device 0.0 on pci9
vtnet6: <VirtIO Networking Adapter> on virtio_pci9
vtnet6: Ethernet address: 52:54:00:fb:36:2b
vtnet6: netmap queues/slots: TX 1/256, RX 1/128
000.000841 [ 452] vtnet_netmap_attach       vtnet attached txq=1, txd=256 rxq=1, rxd=128
pcib10: <ACPI PCI-PCI bridge> mem 0xfea1b000-0xfea1bfff irq 20 at device 4.1 on pci0
pci10: <ACPI PCI bus> on pcib10
virtio_pci10: <VirtIO PCI (modern) Network adapter> mem 0xfd640000-0xfd640fff,0x7010000000-0x7010003fff irq 20 at device 0.0 on pci10
vtnet7: <VirtIO Networking Adapter> on virtio_pci10
vtnet7: Ethernet address: 52:54:00:e7:40:f0
vtnet7: netmap queues/slots: TX 1/256, RX 1/128
000.000845 [ 452] vtnet_netmap_attach       vtnet attached txq=1, txd=256 rxq=1, rxd=128
pcib11: <ACPI PCI-PCI bridge> mem 0xfea1c000-0xfea1cfff irq 20 at device 4.2 on pci0
pci11: <ACPI PCI bus> on pcib11
virtio_pci11: <VirtIO PCI (modern) Network adapter> mem 0xfd440000-0xfd440fff,0x7000000000-0x7000003fff irq 20 at device 0.0 on pci11
vtnet8: <VirtIO Networking Adapter> on virtio_pci11
vtnet8: Ethernet address: 42:44:00:88:e4:81
vtnet8: netmap queues/slots: TX 1/256, RX 1/128
000.000849 [ 452] vtnet_netmap_attach       vtnet attached txq=1, txd=256 rxq=1, rxd=128
uhci0: <Intel 82801I (ICH9) USB controller> port 0xc0c0-0xc0df irq 21 at device 5.0 on pci0
usbus0 on uhci0
usbus0: 12Mbps Full Speed USB v1.0
uhci1: <Intel 82801I (ICH9) USB controller> port 0xc0e0-0xc0ff irq 22 at device 5.1 on pci0
usbus1 on uhci1
usbus1: 12Mbps Full Speed USB v1.0
uhci2: <Intel 82801I (ICH9) USB controller> port 0xc100-0xc11f irq 23 at device 5.2 on pci0
usbus2 on uhci2
usbus2: 12Mbps Full Speed USB v1.0
ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xfea1d000-0xfea1dfff irq 20 at device 5.7 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci0
usbus3: 480Mbps High Speed USB v2.0
virtio_pci12: <VirtIO PCI (legacy) Console adapter> port 0xc000-0xc03f mem 0xfea1e000-0xfea1efff,0x70b0004000-0x70b0007fff irq 22 at device 6.0 on pci0
vtcon0: <VirtIO Console Adapter> on virtio_pci12
virtio_pci13: <VirtIO PCI (legacy) Balloon adapter> port 0xc040-0xc07f mem 0x70b0008000-0x70b000bfff irq 20 at device 8.0 on pci0
vtballoon0: <VirtIO Balloon Adapter> on virtio_pci13
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel ICH9 AHCI SATA controller> port 0xc120-0xc13f mem 0xfea1f000-0xfea1ffff irq 16 at device 31.2 on pci0
ahci0: AHCI v1.00 with 6 1.5Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
acpi_syscontainer0: <System Container> on acpi0
acpi_syscontainer1: <System Container> port 0xcd8-0xce3 on acpi0
acpi_syscontainer2: <System Container> port 0x620-0x62f on acpi0
acpi_syscontainer3: <System Container> port 0xcc0-0xcd7 on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: console (115200,n,8,1)
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
WARNING: Device "psm" is Giant locked and may be deleted before FreeBSD 15.0.
psm0: model IntelliMouse Explorer, device ID 4
orm0: <ISA Option ROM> at iomem 0xea000-0xeffff pnpid ORM0000 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff pnpid PNP0900 on isa0
attimer0: <AT timer> at port 0x40 on isa0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounters tick every 10.000 msec
ugen1.1: <Intel UHCI root HUB> at usbus1
ugen3.1: <Intel EHCI root HUB> at usbus3
ugen0.1: <Intel UHCI root HUB> at usbus0
ugen2.1: <Intel UHCI root HUB> at usbus2
uhub0 on usbus1
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
uhub1 on usbus3
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
uhub2 on usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
uhub3 on usbus0
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Trying to mount root from zfs:pfSense/ROOT/default_20240714144502_20250329075912_20250329082412_20250329142348_20250401180456 []...
uhub0: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
Root mount waiting for: CAM usbus3
Root mount waiting for: CAM usbus3
uhub1: 6 ports with 6 removable, self powered
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Dual Console: Serial Primary, Video Secondary
Configuring crash dumps...
Using /dev/vtbd0p2 for dump device.
Filesystems are clean, continuing...
Mounting filesystems...
Mounting ZFS boot environment...done.

        __
 _ __  / _|___  ___ _ __  ___  ___      _
| '_ \| |_/ __|/ _ \ '_ \/ __|/ _ \   _| |_
| |_) |  _\__ \  __/ | | \__ \  __/  |_   _|
| .__/|_| |___/\___|_| |_|___/\___|    |_|
|_|


Welcome to Netgate pfSense Plus 24.11-RELEASE...

Checking dump device /dev/vtbd0p2 for crash dumps ... no crash dumps on /dev/vtbd0p2.
...ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg /usr/local/lib/compat/pkg /usr/local/lib/freeradius-3.2.6 /usr/local/lib/ipsec /usr/local/lib/mysql /usr/local/lib/perl5/5.36/mach/CORE
32-bit compatibility ldconfig path:
done.
11711
>>> Removing vital flag from php83...done.
External config loader 1.0 is now starting... vtbd0p1 vtbd0p3
Launching the init system...Updating CPU Microcode...
CPU: Intel(R) Core(TM) i7-8700 CPU @ 3.20GHz (3192.00-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x906ea  Family=0x6  Model=0x9e  Stepping=10
  Features=0xf8bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,SS>
  Features2=0xfffab223<SSE3,PCLMULQDQ,VMX,SSSE3,FMA,CX16,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND,HV>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x121<LAHF,ABM,Prefetch>
  Structured Extended Features=0x9c47ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT>
  Structured Extended Features2=0x4<UMIP>
  Structured Extended Features3=0xbc000400<MD_CLEAR,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD>
  XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
  IA32_ARCH_CAPS=0xc00004c<RSBA,SKIP_L1DFL_VME>
  AMD Extended Feature Extensions ID EBX=0x100d000<IBPB,IBRS,STIBP,SSBD>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
Hypervisor: Origin = "KVMKVMKVM"
Done.
 done.
Initializing.................... done.
Starting device manager (devd)...ichsmb0: <Intel 82801I (ICH9) SMBus controller> port 0x700-0x73f irq 16 at device 31.3 on pci0
smbus0: <System Management Bus> on ichsmb0
done.
Loading configuration...done.
Updating configuration...done.
Loading cryptographic accelerator drivers...aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS>
done.
Setting up extended sysctls...sysctl: oid 'net.isr.numthreads' is read only
sysctl: oid 'net.isr.numthreads' is read only
done.
Executing early shell commands...Configuring WireGuard tunnels...wg0: changing name to 'tun_wg0'
tun_wg0: link state changed to UP
route: message indicates error: Invalid argument
done.
done.
Setting timezone...done.
Configuring loopback interface..lo0: link state changed to UP
.done.
Starting syslog...done.
Setting up interfaces microcode...done.
Configuring loopback interface...done.
Configuring  interface...load_dn_sched dn_sched FIFO loaded
load_dn_sched dn_sched QFQ loaded
load_dn_sched dn_sched RR loaded
load_dn_sched dn_sched WF2Q+ loaded
load_dn_sched dn_sched PRIO loaded
load_dn_sched dn_sched FQ_CODEL loaded
load_dn_sched dn_sched FQ_PIE loaded
load_dn_aqm dn_aqm CODEL loaded
load_dn_aqm dn_aqm PIE loaded
done.
Configuring WIFIBRIDGE interface...done.
Configuring CARP settings...done.
Starting Secure Shell Services...done.
Syncing OpenVPN settings...done.
route: route has not been found
route: route has not been found
Configuring firewall......done.
Starting PFLOG...done.
Setting up gateway monitors...route: route has not been found
done.
Setting up static routes...done.
Setting up DNSs...
Starting DNS Resolver...done.
Synchronizing user settings...done.
Configuring CRON...done.
Bootstrapping clock...done.
Starting NTP Server...done.
Starting webConfigurator...done.
Starting Kea DHCP service...done.
Configuring firewall......done.
Generating RRD graphs...done.
Starting UPnP IGD & PCP service...done.
Starting syslog...done.
Configuring filter for dynamic IPsec VPN hosts... done
Starting CRON... done.
 Starting package OpenVPN Client Export Utility...done.
 Starting package System Patches...done.
 Starting package pfBlockerNG...done.
 Starting package iperf...done.
 Starting package mailreport...done.
 Starting package Service Watchdog...done.
 Starting package OpenVPN Client Import Utility...done.
 Starting package freeradius3...done.
 Starting package haproxy-devel...done.
 Starting package UDP Broadcast Relay...done.
 Starting package arpwatch...done.
 Starting package nmap...done.
 Starting package stunnel...done.
 Starting package Avahi...done.
 Starting package WireGuard...done.
 Starting package Traffic Totals...done.
 Starting /usr/local/etc/rc.d/haproxy.sh...done.
 Starting /usr/local/etc/rc.d/pfb_dnsbl.sh...done.
 Starting /usr/local/etc/rc.d/pfb_filter.sh...done.
 Starting /usr/local/etc/rc.d/vnstatd.sh...done.
Netgate pfSense Plus 24.11-RELEASE amd64 20241122-0434
Bootup complete
Performing automatic boot verification...done.

FreeBSD/amd64 (pf.home) (ttyu0)

KVM Guest - Netgate Device ID: 68ce37bf5ad4e6b0f9af

*** Welcome to Netgate pfSense Plus 24.11-RELEASE (amd64) on pf ***

  Current Boot Environment: default_20240714144502_20250329075912_20250329082412_20250329142348_20250401180456
     Next Boot Environment: default_20240714144502_20250329075912_20250329082412_20250329142348_20250401180456

  (wan)     -> pppoe0  -> v4/PPPoE: 194.26.35.71/32
 (lan)       -> vtnet1  -> v4: 192.168.31.1/24
 (opt1)        -> vtnet2  ->
 (opt2)     -> vtnet3  -> v4/DHCP4: 192.168.33.5/24
 (opt3)     -> ovpns2  -> v4: 192.168.35.1/32
 (opt4)           -> vtnet4  -> v4: 192.168.36.1/24
 (opt5)        -> vtnet5  ->
 (opt6)        -> ovpnc3  -> v4: 192.168.198.10/32
 (opt7)    -> bridge0 -> v4: 192.168.41.1/24
 (opt8)     -> vtnet6  ->
 (opt9)          -> vtnet0  ->
 (opt10)        -> vtnet7  -> v4: 192.168.42.1/24
 OPT11 (opt11)        -> tun_wg0 ->
 (opt12) -> vtnet8  -> v4/DHCP4: 100.33.0.21/17

 0) Logout / Disconnect SSH            9) pfTop
 1) Assign Interfaces                 10) Filter Logs
 2) Set interface(s) IP address       11) Restart GUI
 3) Reset admin account and password  12) PHP shell + Netgate pfSense Plus tools
 4) Reset to factory defaults         13) Update from console
 5) Reboot system                     14) Disable Secure Shell (sshd)
 6) Halt system                       15) Restore recent configuration
 7) Ping host                         16) Restart PHP-FPM
 8) Shell

Enter an option:
                                          1 Reply Last reply Reply Quote 0
                                          • stephenw10S
                                            stephenw10 Netgate Administrator
                                            last edited by

                                            @netblues said in boot failure upgrading to 25.03.b.20250306.0140 i:

                                            virtio_pci0: <VirtIO PCI (modern) Block adapter> mem 0xfe800000-0xfe800fff,0x70a0000000-0x70a0003fff irq 21 at device 0.0 on pci1
                                            vtblk0: <VirtIO Block Adapter> on virtio_pci0
                                            vtblk0: 20480MB (41943040 512 byte sectors)

                                            Ah interesting. I'm not using that device type. How is that shown in the hypervisor?

                                            N 1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post
                                            Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.