Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Cannot connect to installer daemon

    Scheduled Pinned Locked Moved Problems Installing or Upgrading pfSense Software
    25 Posts 2 Posters 729 Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • stephenw10S
      stephenw10 Netgate Administrator
      last edited by

      Hmm, no errors shown there but the daemon log should have a lot more in it....

      The only time I've ever seen that is after restarting the installer without rebooting. But I assume you are rebooting here between attempts?

      M 1 Reply Last reply Reply Quote 0
      • M
        mattlund @stephenw10
        last edited by

        @stephenw10 yes I am rebooting between the attempts.

        Looks like the issue is with the pfsense-installerd.sh it should bring up a webservice which do not seem to be accessible through nginx. I get ssl issues and can not bypass that.

        Ideas?

        1 Reply Last reply Reply Quote 0
        • stephenw10S
          stephenw10 Netgate Administrator
          last edited by

          Hmm, do you have a good system time? Some time ago there was a bug that caused the installer to generate a cert that was then seen as expired once ntp kicked in. That should be fixed but perhaps you're hitting some variant.

          M 1 Reply Last reply Reply Quote 0
          • M
            mattlund @stephenw10
            last edited by

            @stephenw10 yes I have a good system time and date it might diff a few seconds, but that is it.

            More ideas?

            Is it possible to download an older image 2.6.x or 2.7.x just to verify if I get a different behaivour?

            1 Reply Last reply Reply Quote 0
            • stephenw10S
              stephenw10 Netgate Administrator
              last edited by

              Yes you can get the legacy installers for 2.7.2 here.

              Those definitely won't hit this because the installer code itself is completely different. But you can test upgrading to 2.8.

              M 1 Reply Last reply Reply Quote 0
              • M
                mattlund @stephenw10
                last edited by

                @stephenw10 I tried to install 2.7.2 and it worked fine the install as you expected.

                But I hit another issue and that is firefox generates SSL_ERROR_BAD_MAC_READ when I try to connect to pfsense 2.7.2 after inital install at https://192.168.1.1.

                So I am not able to connect to the GUI at all. I logged in via the console to the shell and executed the command below but this did not help.

                pfSsh.php playback generateguicert

                I also tested to install Opnsense 25.1 and it just works very well. As well as FreeBSD 14.

                So ideas on what to test or how to resolve this situation.

                It is quite clear that the new pfsense 2.8 installer is not as compatible as the old 2.7.2.

                Any ideas or tests you can think of would be appricated since I want to run pfsense on my box.

                M 1 Reply Last reply Reply Quote 0
                • M
                  mattlund @mattlund
                  last edited by mattlund

                  @stephenw10 I did some further test on SSL_ERROR_BAD_MAC_READ.
                  I fund out that I had the same issue on a live cd of Debian 12 as well.

                  I then ran memtest86 test suite and found out that it seems to be an issue with my RAM memory. I will exchange the RAM memory during next week and retest to install pfsense 2.7.2.

                  I do not belive that pfsense 2.8 installation issues is caused by the RAM memory, but I will retest this as well.

                  I will reach out here with an update and some advise from you if I am not successful in my endeavor.

                  1 Reply Last reply Reply Quote 0
                  • stephenw10S
                    stephenw10 Netgate Administrator
                    last edited by

                    Huh. Well that would not be anything I'd have suspected! Let us know if that allows it to run the installer.

                    M 1 Reply Last reply Reply Quote 0
                    • M
                      mattlund @stephenw10
                      last edited by

                      @stephenw10 so my troubleshooting has reached it's end.

                      It seems that there was an issue with the RAM memory first. When I exchanged this with a new healty module tested with memtest86, the issue still existed with SSL_ERROR_BAD_MAC_READ!

                      My time and date and BIOS battery are OK so no issues there.

                      I can only conclude that it is a CPU issue, maybe due to overheating at some point. I am just guessing now, but since the CPU is integrated with the motherboard I will trash it.

                      Thanks for all the support and ideas!

                      1 Reply Last reply Reply Quote 0
                      • stephenw10S
                        stephenw10 Netgate Administrator
                        last edited by

                        Well we should have new installer version available quite soon so you could try that on it.

                        1 Reply Last reply Reply Quote 0
                        • First post
                          Last post
                        Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.