Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    SG-1100 - Failed pfsense upgrade

    Scheduled Pinned Locked Moved Official Netgate® Hardware
    19 Posts 3 Posters 1.9k Views 3 Watching
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • stephenw10S Offline
      stephenw10 Netgate Administrator
      last edited by

      Well you obviously you shouldn't need to so I'd hope to see some error logged that tells us what's happening.

      But I would try installing it as UFS if it still fails with ZFS. That will rewrite the partition tables. If that does work then try installing ZFS again.

      1 Reply Last reply Reply Quote 0
      • E Offline
        extremesurf
        last edited by

        @GeekyTim @stephenw10 Did you guys ever figure this out? I have an SG-1100 that after a power outage has the exact same issue, so I'm trying to reinstall it.

        I have all of the identical output to the commands Tim ran (with the exception of my 16GB USB key being recognized differently which is to be expected).

        I tried installing as UFS to rewrite the partition tables, but that fails with the same error. Trying ZFS again after still ends in "Installation Aborted". During the installation it quickly flashes:

        mmcsd0: Error indicated: 1 Timeout
mmcsd0: Error indicated: 1 Timeout
mmcsd0: Error indicated: 1 Timeout

        After the installer fails when I exit to the command prompt I don't seem to have an install.log file, all I have in /var/log/ that has been written today is:

        • auth.log
        • cron
        • daemon.log
        • messages

        Here's the contents of the messages file:

        Sep 19 15:49:15 pfSense-install newsyslog[1750]: logfile first created
Sep 19 15:49:16 pfSense-install syslogd: kernel boot file is /boot/kernel/kernel
Sep 19 15:49:16 pfSense-install kernel: ---<<BOOT>>---
Sep 19 15:49:16 pfSense-install kernel: GDB: debug ports: uart
Sep 19 15:49:16 pfSense-install kernel: GDB: current port: uart
Sep 19 15:49:16 pfSense-install kernel: KDB: debugger backends: ddb gdb
Sep 19 15:49:16 pfSense-install kernel: KDB: current backend: ddb
Sep 19 15:49:16 pfSense-install kernel: Copyright (c) 1992-2024 The FreeBSD Project.
Sep 19 15:49:16 pfSense-install kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
Sep 19 15:49:16 pfSense-install kernel:         The Regents of the University of California. All rights reserved.
Sep 19 15:49:16 pfSense-install kernel: FreeBSD is a registered trademark of The FreeBSD Foundation.
Sep 19 15:49:16 pfSense-install kernel: FreeBSD 15.0-CURRENT #0 installer-RELENG_v1_0-n256387-33bc50df25b: Thu Sep 19 15:09:39 UTC 2024
Sep 19 15:49:16 pfSense-install kernel:     root@freebsd:/var/jenkins/workspace/pfSense-installer-snapshots-v1_0-main/obj/aarch64/HST5KqyO/var/jenkins/workspace/pfSense-installer-snapshots-
v1_0-main/sources/FreeBSD-src-installer-RELENG_v1_0/arm64.aarch64/sys/pfSense-Installer arm64
Sep 19 15:49:16 pfSense-install kernel: FreeBSD clang version 18.1.6 (https://github.com/llvm/llvm-project.git llvmorg-18.1.6-0-g1118c2e05e67)
Sep 19 15:49:16 pfSense-install kernel: VT: init without driver.
Sep 19 15:49:16 pfSense-install kernel: module scmi already present!
Sep 19 15:49:16 pfSense-install kernel: real memory  = 1073664000 (1023 MB)
Sep 19 15:49:16 pfSense-install kernel: avail memory = 982437888 (936 MB)
Sep 19 15:49:16 pfSense-install kernel: Starting CPU 1 (1)
Sep 19 15:49:16 pfSense-install kernel: FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
Sep 19 15:49:16 pfSense-install kernel: arc4random: WARNING: initial seeding bypassed the cryptographic random device because it was not yet seeded and the knob 'bypass_before_seeding' was
enabled.
Sep 19 15:49:16 pfSense-install kernel: ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
Sep 19 15:49:16 pfSense-install kernel: ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
Sep 19 15:49:16 pfSense-install kernel: module_register_init: MOD_LOAD (ipw_bss_fw, 0xffff000000265c9c, 0) error 1
Sep 19 15:49:16 pfSense-install kernel: ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
Sep 19 15:49:16 pfSense-install kernel: ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
Sep 19 15:49:16 pfSense-install kernel: module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffff000000265d54, 0) error 1
Sep 19 15:49:16 pfSense-install kernel: ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
Sep 19 15:49:16 pfSense-install kernel: ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
Sep 19 15:49:16 pfSense-install kernel: module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffff000000265e0c, 0) error 1
Sep 19 15:49:16 pfSense-install kernel: iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
Sep 19 15:49:16 pfSense-install kernel: iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
Sep 19 15:49:16 pfSense-install kernel: module_register_init: MOD_LOAD (iwi_bss_fw, 0xffff000000265ec4, 0) error 1
Sep 19 15:49:16 pfSense-install kernel: iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
Sep 19 15:49:16 pfSense-install kernel: iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
Sep 19 15:49:16 pfSense-install kernel: module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffff000000265f7c, 0) error 1
Sep 19 15:49:16 pfSense-install kernel: iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
Sep 19 15:49:16 pfSense-install kernel: iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
Sep 19 15:49:16 pfSense-install kernel: module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffff000000266034, 0) error 1
Sep 19 15:49:16 pfSense-install kernel: random: entropy device external interface
Sep 19 15:49:16 pfSense-install kernel: wlan: mac acl policy registered
Sep 19 15:49:16 pfSense-install kernel: kbd0 at kbdmux0
Sep 19 15:49:16 pfSense-install kernel: ofwbus0: <Open Firmware Device Tree>
Sep 19 15:49:16 pfSense-install kernel: simplebus0: <Flattened device tree simple bus> on ofwbus0
Sep 19 15:49:16 pfSense-install kernel: simplebus1: <Flattened device tree simple bus> on simplebus0
Sep 19 15:49:16 pfSense-install kernel: ofw_firmware0: <OFW Firmware Group> on ofwbus0
Sep 19 15:49:16 pfSense-install kernel: simple_mfd0: <Simple MFD (Multi-Functions Device)> mem 0x13800-0x138ff,0x13c00-0x13c1f on simplebus1
Sep 19 15:49:16 pfSense-install kernel: simple_mfd1: <Simple MFD (Multi-Functions Device)> mem 0x18800-0x188ff,0x18c00-0x18c1f on simplebus1
Sep 19 15:49:16 pfSense-install kernel: gpio0: <Armada 37x0 North Bridge GPIO Controller> mem 0x13800-0x138ff,0x13c00-0x13c1f irq 29,30,31,32,33,34,35,36,37,38,39,40 on simple_mfd0
Sep 19 15:49:16 pfSense-install kernel: gpiobus0: <OFW GPIO bus> on gpio0
Sep 19 15:49:16 pfSense-install kernel: gpio1: <Armada 37x0 South Bridge GPIO Controller> mem 0x18800-0x188ff,0x18c00-0x18c1f irq 41,42,43,44,45 on simple_mfd1
Sep 19 15:49:16 pfSense-install kernel: gpiobus1: <OFW GPIO bus> on gpio1
Sep 19 15:49:16 pfSense-install kernel: gpioregulator0: <GPIO controlled regulator> on ofwbus0
Sep 19 15:49:16 pfSense-install kernel: a37x0-xtal0: <Marvell Armada 3700 Oscillator> mem 0x13800-0x138ff,0x13c00-0x13c1f on simple_mfd0
Sep 19 15:49:16 pfSense-install kernel: generic_timer0: <ARMv8 Generic Timer> irq 0,1,2,3 on ofwbus0
Sep 19 15:49:16 pfSense-install kernel: Timecounter "ARM MPCore Timecounter" frequency 12500000 Hz quality 1000
Sep 19 15:49:16 pfSense-install kernel: Event timer "ARM MPCore Eventtimer" frequency 12500000 Hz quality 1000
Sep 19 15:49:16 pfSense-install kernel: a37x0_tbg0: <Marvell Armada 3700 time base generators> mem 0x13200-0x132ff on simplebus1
Sep 19 15:49:16 pfSense-install kernel: a37x0_nb_periph_driver0: <marvell,armada-3700-nb-periph-clock> mem 0x13000-0x130ff on simplebus1
Sep 19 15:49:16 pfSense-install kernel: a37x0_sb_periph_driver0: <marvell,armada-3700-sb-periph-clock> mem 0x18000-0x180ff on simplebus1
Sep 19 15:49:16 pfSense-install kernel: cpulist0: <Open Firmware CPU Group> on ofwbus0
Sep 19 15:49:16 pfSense-install kernel: cpu0: <Open Firmware CPU> on cpulist0
Sep 19 15:49:16 pfSense-install kernel: pmu0: <Performance Monitoring Unit> irq 4 on ofwbus0
Sep 19 15:49:16 pfSense-install kernel: spi0: <Armada 37x0 SPI controller> mem 0x10600-0x10fff irq 6 on simplebus1
Sep 19 15:49:16 pfSense-install kernel: iichb0: <Marvell Armada 37x0 IIC controller> mem 0x11000-0x11023 irq 7 on simplebus1
Sep 19 15:49:16 pfSense-install kernel: iicbus0: <OFW I2C bus> on iichb0
Sep 19 15:49:16 pfSense-install kernel: iic0: <I2C generic I/O> on iicbus0
Sep 19 15:49:16 pfSense-install kernel: uart0: <Marvell Armada 3700 UART> mem 0x12000-0x12017 irq 9,10,11 on simplebus1
Sep 19 15:49:16 pfSense-install kernel: uart0: console (115200,n,8,1)
Sep 19 15:49:16 pfSense-install kernel: gpioc0: <GPIO controller> on gpio0
Sep 19 15:49:16 pfSense-install kernel: gpioc1: <GPIO controller> on gpio1
Sep 19 15:49:16 pfSense-install kernel: mvneta0: <NETA controller> mem 0x30000-0x33fff irq 14 on simplebus1
Sep 19 15:49:16 pfSense-install kernel: mvneta0: version is 10
Sep 19 15:49:16 pfSense-install kernel: mdio0: <MDIO> on mvneta0
Sep 19 15:49:16 pfSense-install kernel: mdioproxy0: <MII/MDIO proxy, MDIO side> on mdio0
Sep 19 15:49:16 pfSense-install kernel: e6000sw0: <Marvell 88E6341> on mdio0
Sep 19 15:49:16 pfSense-install kernel: e6000sw0: multi-chip addressing mode (0x1)
Sep 19 15:49:16 pfSense-install kernel: e6000sw0: CPU port at 0
Sep 19 15:49:16 pfSense-install kernel: e6000sw0: fixed port at 0
Sep 19 15:49:16 pfSense-install kernel: e6000sw0: PHY at port 1
Sep 19 15:49:16 pfSense-install kernel: miibus0: <MII bus> on e6000sw0
Sep 19 15:49:16 pfSense-install kernel: e1000phy0: <Marvell 88E1000 Gigabit PHY> PHY 17 on miibus0
Sep 19 15:49:16 pfSense-install kernel: e1000phy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
Sep 19 15:49:16 pfSense-install kernel: e6000sw0: PHY at port 2
Sep 19 15:49:16 pfSense-install kernel: miibus1: <MII bus> on e6000sw0
Sep 19 15:49:16 pfSense-install kernel: e1000phy1: <Marvell 88E1000 Gigabit PHY> PHY 18 on miibus1
Sep 19 15:49:16 pfSense-install kernel: e1000phy1:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
Sep 19 15:49:16 pfSense-install kernel: e6000sw0: PHY at port 3
Sep 19 15:49:16 pfSense-install kernel: miibus2: <MII bus> on e6000sw0
Sep 19 15:49:16 pfSense-install kernel: e1000phy2: <Marvell 88E1000 Gigabit PHY> PHY 19 on miibus2
Sep 19 15:49:16 pfSense-install kernel: e1000phy2:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
Sep 19 15:49:16 pfSense-install kernel: e6000sw0: switch is ready.
Sep 19 15:49:16 pfSense-install kernel: etherswitch0: <Switch controller> on e6000sw0
Sep 19 15:49:16 pfSense-install kernel: mvneta0: Ethernet address: f0:ad:4e:0b:a1:76
Sep 19 15:49:16 pfSense-install kernel: xhci0: <Generic USB 3.0 controller> mem 0x58000-0x5bfff irq 16 on simplebus1
Sep 19 15:49:16 pfSense-install kernel: xhci0: 32 bytes context size, 32-bit DMA
Sep 19 15:49:16 pfSense-install kernel: usbus0 on xhci0
Sep 19 15:49:16 pfSense-install kernel: ehci0: <Marvell Integrated USB 2.0 controller> mem 0x5e000-0x5efff irq 17 on simplebus1
Sep 19 15:49:16 pfSense-install kernel: usbus1: EHCI version 1.0
Sep 19 15:49:16 pfSense-install kernel: usbus1 on ehci0
Sep 19 15:49:16 pfSense-install kernel: sdhci_xenon0: <Armada Xenon SDHCI controller> mem 0xd0000-0xd02ff,0x1e808-0x1e80b irq 25 on simplebus1
Sep 19 15:49:16 pfSense-install kernel: sdhci_xenon1: <Armada Xenon SDHCI controller> mem 0xd8000-0xd82ff,0x17808-0x1780b irq 26 on simplebus1
Sep 19 15:49:16 pfSense-install kernel: mmc0: <MMC/SD bus> on sdhci_xenon1
Sep 19 15:49:16 pfSense-install kernel: ahci0: <AHCI SATA controller> mem 0xe0000-0xe0177 irq 27 on simplebus1
Sep 19 15:49:16 pfSense-install kernel: ahci0: AHCI v1.30 with 1 6Gbps ports, Port Multiplier supported with FBS
Sep 19 15:49:16 pfSense-install kernel: ahcich0: <AHCI channel> at channel 0 on ahci0
Sep 19 15:49:16 pfSense-install kernel: device_attach: ahcich0 attach returned 6
Sep 19 15:49:16 pfSense-install kernel: pcib0: <Marvell Armada 3700 PCIe Bus Controller> mem 0xd0070000-0xd008ffff irq 5 on simplebus0
Sep 19 15:49:16 pfSense-install kernel: pcib0: link never came up
Sep 19 15:49:16 pfSense-install kernel: pci0: <OFW PCI bus> on pcib0
Sep 19 15:49:16 pfSense-install kernel: gpioled0: <GPIO LEDs> on ofwbus0
Sep 19 15:49:16 pfSense-install kernel: armv8crypto0: <AES-CBC,AES-XTS,AES-GCM>
Sep 19 15:49:16 pfSense-install kernel: Timecounters tick every 1.000 msec
Sep 19 15:49:16 pfSense-install kernel: mvneta0: link state changed to UP
Sep 19 15:49:16 pfSense-install kernel: spibus0: <OFW SPI bus> on spi0
Sep 19 15:49:16 pfSense-install kernel: mx25l0: <M25Pxx Flash Family> at cs 0 mode 0 on spibus0
Sep 19 15:49:16 pfSense-install kernel: mx25l0: device type mx25u3235f, size 4096K in 64 sectors of 64K, erase size 4K
Sep 19 15:49:16 pfSense-install kernel: usbus0: 5.0Gbps Super Speed USB v3.0
Sep 19 15:49:16 pfSense-install kernel: usbus1: 480Mbps High Speed USB v2.0
Sep 19 15:49:16 pfSense-install kernel: ugen0.1: <Generic XHCI root HUB> at usbus0
Sep 19 15:49:16 pfSense-install kernel: uhub0 on usbus0
Sep 19 15:49:16 pfSense-install kernel: uhub0: <Generic XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
Sep 19 15:49:16 pfSense-install kernel: ugen1.1: <Marvell EHCI root HUB> at usbus1
Sep 19 15:49:16 pfSense-install kernel: uhub1 on usbus1
Sep 19 15:49:16 pfSense-install kernel: uhub1: <Marvell EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
Sep 19 15:49:16 pfSense-install kernel: mmc0: Failed to set VCCQ for card at relative address 2
Sep 19 15:49:16 pfSense-install kernel: mmcsd0: 8GB <MMCHC SEM08G 3.10 SN 825A8321 MFG 09/2016 by 69 0x0000> at mmc0 50.0MHz/8bit/65535-block
Sep 19 15:49:16 pfSense-install kernel: mmcsd0boot0: 2MB partition 1 at mmcsd0
Sep 19 15:49:16 pfSense-install kernel: mmcsd0boot1: 2MB partition 2 at mmcsd0
Sep 19 15:49:16 pfSense-install kernel: mmcsd0rpmb: 2MB partition 3 at mmcsd0
Sep 19 15:49:16 pfSense-install kernel: Trying to mount root from ufs:/dev/ufs/pfSense_Install [ro,noatime]...
Sep 19 15:49:16 pfSense-install kernel: CPU  0: ARM Cortex-A53 r0p4 affinity:  0
Sep 19 15:49:16 pfSense-install kernel:                    Cache Type = <64 byte D-cacheline,64 byte I-cacheline,VIPT ICache,64 byte ERG,64 byte CWG>
Sep 19 15:49:16 pfSense-install kernel:  Instruction Set Attributes 0 = <CRC32,SHA2,SHA1,AES+PMULL>
Sep 19 15:49:16 pfSense-install kernel:  Instruction Set Attributes 1 = <>
Sep 19 15:49:16 pfSense-install kernel:  Instruction Set Attributes 2 = <>
Sep 19 15:49:16 pfSense-install kernel:          Processor Features 0 = <GIC,AdvSIMD,FP,EL3 32,EL2 32,EL1 32,EL0 32>
Sep 19 15:49:16 pfSense-install kernel:          Processor Features 1 = <>
Sep 19 15:49:16 pfSense-install kernel:          Processor Features 2 = <>
Sep 19 15:49:16 pfSense-install kernel:       Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,1TB PA>
Sep 19 15:49:16 pfSense-install kernel:       Memory Model Features 1 = <8bit VMID>
Sep 19 15:49:16 pfSense-install kernel:       Memory Model Features 2 = <32bit CCIDX,48bit VA>
Sep 19 15:49:16 pfSense-install kernel:       Memory Model Features 3 = <>
Sep 19 15:49:16 pfSense-install kernel:       Memory Model Features 4 = <>
Sep 19 15:49:16 pfSense-install kernel:              Debug Features 0 = <DoubleLock,2 CTX BKPTs,4 Watchpoints,6 Breakpoints,PMUv3,Debugv8>
Sep 19 15:49:16 pfSense-install kernel:              Debug Features 1 = <>
Sep 19 15:49:16 pfSense-install kernel:          Auxiliary Features 0 = <>
Sep 19 15:49:16 pfSense-install kernel:          Auxiliary Features 1 = <>
Sep 19 15:49:16 pfSense-install kernel: AArch32 Instruction Set Attributes 5 = <CRC32,SHA2,SHA1,AES+VMULL,SEVL>
Sep 19 15:49:16 pfSense-install kernel: AArch32 Media and VFP Features 0 = <FPRound,FPSqrt,FPDivide,DP VFPv3+v4,SP VFPv3+v4,AdvSIMD>
Sep 19 15:49:16 pfSense-install kernel: AArch32 Media and VFP Features 1 = <SIMDFMAC,FPHP DP Conv,SIMDHP SP Conv,SIMDSP,SIMDInt,SIMDLS,FPDNaN,FPFtZ>
Sep 19 15:49:16 pfSense-install kernel: CPU  1: ARM Cortex-A53 r0p4 affinity:  1
Sep 19 15:49:16 pfSense-install kernel: gic0: using for IPIs
Sep 19 15:49:16 pfSense-install kernel: Release APs...done
Sep 19 15:49:16 pfSense-install kernel: TCP_ratelimit: Is now initialized
Sep 19 15:49:16 pfSense-install kernel: uhub0: 2 ports with 2 removable, self powered
Sep 19 15:49:16 pfSense-install kernel: uhub1: 1 port with 1 removable, self powered
Sep 19 15:49:16 pfSense-install kernel: e6000sw0port1: link state changed to DOWN
Sep 19 15:49:16 pfSense-install kernel: e6000sw0port2: link state changed to DOWN
Sep 19 15:49:16 pfSense-install kernel: e6000sw0port3: link state changed to UP
Sep 19 15:49:16 pfSense-install kernel: Root mount waiting for: usbus1
Sep 19 15:49:16 pfSense-install syslogd: last message repeated 2 times
Sep 19 15:49:16 pfSense-install kernel: ugen1.2: <Kingston DataTraveler 111> at usbus1
Sep 19 15:49:16 pfSense-install kernel: umass0 on uhub1
Sep 19 15:49:16 pfSense-install kernel: umass0: <Kingston DataTraveler 111, class 0/0, rev 2.10/1.00, addr 2> on usbus1
Sep 19 15:49:16 pfSense-install kernel: mountroot: waiting for device /dev/ufs/pfSense_Install...
Sep 19 15:49:16 pfSense-install kernel: da0 at umass-sim0 bus 0 scbus0 target 0 lun 0
Sep 19 15:49:16 pfSense-install kernel: da0: <Kingston DataTraveler 111 PMAP> Removable Direct Access SPC-2 SCSI device
Sep 19 15:49:16 pfSense-install kernel: da0: Serial Number 0707291D9FD7D069
Sep 19 15:49:16 pfSense-install kernel: da0: 40.000MB/s transfers
Sep 19 15:49:16 pfSense-install kernel: da0: 14786MB (30283008 512 byte sectors)
Sep 19 15:49:16 pfSense-install kernel: da0: quirks=0x2<NO_6_BYTE>
Sep 19 15:49:16 pfSense-install kernel: Warning: no time-of-day clock registered, system time will not be set accurately
Sep 19 15:49:16 pfSense-install kernel: Dual Console: Video Primary, Serial Secondary
Sep 19 15:49:16 pfSense-install kernel: random: unblocking device.
Sep 19 15:49:16 pfSense-install kernel: lo0: link state changed to UP
Sep 19 15:49:18 pfSense-install kernel: e6000sw0port3: link state changed to DOWN
Sep 19 15:49:22 pfSense-install kernel: e6000sw0port3: link state changed to UP
Sep 19 15:49:34 pfSense-install unbound[2046]: [2046:0] notice: init module 0: validator
Sep 19 15:49:34 pfSense-install unbound[2046]: [2046:0] notice: init module 1: iterator
Sep 19 15:49:36 pfSense-install dhclient[2096]: New IP Address (mvneta0.4090): 10.0.0.37
Sep 19 15:49:36 pfSense-install dhclient[2100]: New Subnet Mask (mvneta0.4090): 255.255.255.0
Sep 19 15:49:36 pfSense-install dhclient[2104]: New Broadcast Address (mvneta0.4090): 10.0.0.255
Sep 19 15:49:36 pfSense-install dhclient[2108]: New Routers (mvneta0.4090): 10.0.0.1
Sep 19 15:49:38 pfSense-install kernel: ZFS filesystem version: 5
Sep 19 15:49:38 pfSense-install kernel: ZFS storage pool version: features support (5000)
Sep 19 15:49:40 pfSense-install kernel: mmcsd0: Error indicated: 1 Timeout
Sep 19 15:49:40 pfSense-install kernel: sdhci_xenon1-slot0: Got AutoCMD12 error 0x0001, but there is no active command.
Sep 19 15:49:40 pfSense-install kernel: sdhci_xenon1-slot0: ============== REGISTER DUMP ==============
Sep 19 15:49:40 pfSense-install kernel: sdhci_xenon1-slot0: Sys addr: 0x08080000 | Version:  0x00000002
Sep 19 15:49:40 pfSense-install kernel: sdhci_xenon1-slot0: Blk size: 0x00007200 | Blk cnt:  0x00000008
Sep 19 15:49:40 pfSense-install kernel: sdhci_xenon1-slot0: Argument: 0x00884219 | Trn mode: 0x00000037
Sep 19 15:49:40 pfSense-install kernel: sdhci_xenon1-slot0: Present:  0x01f20000 | Host ctl: 0x00000025
Sep 19 15:49:40 pfSense-install kernel: sdhci_xenon1-slot0: Power:    0x0000000f | Blk gap:  0x00000000
Sep 19 15:49:40 pfSense-install kernel: sdhci_xenon1-slot0: Wake-up:  0x00000000 | Clock:    0x00000407
Sep 19 15:49:40 pfSense-install kernel: sdhci_xenon1-slot0: Timeout:  0x0000000c | Int stat: 0x00000000
Sep 19 15:49:40 pfSense-install kernel: sdhci_xenon1-slot0: Int enab: 0x01ff003b | Sig enab: 0x01ff003b
Sep 19 15:49:40 pfSense-install kernel: sdhci_xenon1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
Sep 19 15:49:40 pfSense-install kernel: sdhci_xenon1-slot0: Caps:     0x25ec0099 | Caps2:    0x0000af77
Sep 19 15:49:40 pfSense-install kernel: sdhci_xenon1-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
Sep 19 15:49:40 pfSense-install kernel: sdhci_xenon1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
Sep 19 15:49:40 pfSense-install kernel: sdhci_xenon1-slot0: ===========================================
Sep 19 15:49:40 pfSense-install kernel: mmcsd0: Error indicated: 1 Timeout
Sep 19 15:49:40 pfSense-install ZFS[2233]: vdev I/O failure, zpool=pfSense path=/dev/mmcsd0s3a offset=7540580352 size=8192 error=5
Sep 19 15:49:40 pfSense-install ZFS[2237]: vdev I/O failure, zpool=pfSense path=/dev/mmcsd0s3a offset=7540842496 size=8192 error=5
Sep 19 15:49:40 pfSense-install ZFS[2241]: vdev I/O failure, zpool=pfSense path=/dev/mmcsd0s3a offset=270336 size=8192 error=5
Sep 19 15:49:40 pfSense-install ZFS[2245]: vdev probe failure, zpool=pfSense path=/dev/mmcsd0s3a
Sep 19 15:49:40 pfSense-install ZFS[2252]: pool I/O failure, zpool=pfSense error=6
Sep 19 15:49:40 pfSense-install kernel: mmcsd0: Error indicated: 1 Timeout
Sep 19 15:49:40 pfSense-install syslogd: last message repeated 2 times
Sep 19 15:49:40 pfSense-install ZFS[2257]: pool I/O failure, zpool=pfSense error=6
Sep 19 15:49:41 pfSense-install ZFS[2265]: pool log replay failure, zpool=pfSense
Sep 19 15:49:41 pfSense-install ZFS[2273]: vdev probe failure, zpool=pfSense path=/dev/mmcsd0s3a
Sep 19 15:49:41 pfSense-install ZFS[2278]: vdev state changed, pool_guid=8210094690085210189 vdev_guid=2433099826784048730
Sep 19 15:49:41 pfSense-install ZFS[2282]: failed to load zpool pfSense
Sep 19 15:51:46 pfSense-install unbound[2308]: [2308:0] notice: init module 0: validator
Sep 19 15:51:46 pfSense-install unbound[2308]: [2308:0] notice: init module 1: iterator
Sep 19 15:51:46 pfSense-install unbound[2329]: [2329:0] notice: init module 0: validator
Sep 19 15:51:46 pfSense-install unbound[2329]: [2329:0] notice: init module 1: iterator
Sep 19 15:51:47 pfSense-install dhclient[2078]: connection closed
Sep 19 15:51:47 pfSense-install dhclient[2078]: exiting.
Sep 19 15:51:47 pfSense-install dhclient[2358]: New IP Address (mvneta0.4090): 10.0.0.37
Sep 19 15:51:47 pfSense-install dhclient[2362]: New Subnet Mask (mvneta0.4090): 255.255.255.0
Sep 19 15:51:47 pfSense-install dhclient[2366]: New Broadcast Address (mvneta0.4090): 10.0.0.255
Sep 19 15:51:47 pfSense-install dhclient[2370]: New Routers (mvneta0.4090): 10.0.0.1
Sep 19 15:52:16 pfSense-install ntpd[2586]: ntpd 4.2.8p18@1.4062-o Thu Sep 19 15:33:52 UTC 2024 (1): Starting
Sep 19 15:52:16 pfSense-install ntpd[2586]: Command line: /usr/local/sbin/ntpd -g -q -c /tmp/tmp.Rgzdr37vkE 216.239.35.0 216.239.35.4 216.239.35.8 216.239.35.12
Sep 19 15:52:16 pfSense-install ntpd[2586]: ----------------------------------------------------
Sep 19 15:52:16 pfSense-install ntpd[2586]: ntp-4 is maintained by Network Time Foundation,
Sep 19 15:52:16 pfSense-install ntpd[2586]: Inc. (NTF), a non-profit 501(c)(3) public-benefit
Sep 19 15:52:16 pfSense-install ntpd[2586]: corporation.  Support and training for ntp-4 are
Sep 19 15:52:16 pfSense-install ntpd[2586]: available at https://www.nwtime.org/support
Sep 19 15:52:16 pfSense-install ntpd[2586]: ----------------------------------------------------
Oct 20 20:25:18 pfSense-install ntpd[2586]: ntpd: time set +34230775.385597 s
Oct 20 20:26:22 pfSense-install kernel: mmcsd0: Error indicated: 1 Timeout
Oct 20 20:26:22 pfSense-install syslogd: last message repeated 4 times
Oct 20 20:26:34 pfSense-install unbound[2791]: [2791:0] notice: init module 0: validator
Oct 20 20:26:34 pfSense-install unbound[2791]: [2791:0] notice: init module 1: iterator
Oct 20 20:26:35 pfSense-install unbound[2832]: [2832:0] notice: init module 0: validator
Oct 20 20:26:35 pfSense-install unbound[2832]: [2832:0] notice: init module 1: iterator
Oct 20 20:26:37 pfSense-install dhclient[2914]: New IP Address (mvneta0.4090): 10.0.0.37
Oct 20 20:26:37 pfSense-install dhclient[2918]: New Subnet Mask (mvneta0.4090): 255.255.255.0
Oct 20 20:26:37 pfSense-install dhclient[2922]: New Broadcast Address (mvneta0.4090): 10.0.0.255
Oct 20 20:26:37 pfSense-install dhclient[2926]: New Routers (mvneta0.4090): 10.0.0.1

        Even before the install process starts, after running run usbrecovery it has the related messages as it's loading.

        Is it bricked, or did you come up with a solution or anything else I can try?

        1 Reply Last reply Reply Quote 0
        • stephenw10S Offline
          stephenw10 Netgate Administrator
          last edited by

          This looks like a low level issue with the eMMC:

          Sep 19 15:49:40 pfSense-install kernel: mmcsd0: Error indicated: 1 Timeout
Sep 19 15:49:40 pfSense-install kernel: sdhci_xenon1-slot0: Got AutoCMD12 error 0x0001, but there is no active command.
Sep 19 15:49:40 pfSense-install kernel: sdhci_xenon1-slot0: ============== REGISTER DUMP ==============
Sep 19 15:49:40 pfSense-install kernel: sdhci_xenon1-slot0: Sys addr: 0x08080000 | Version:  0x00000002
Sep 19 15:49:40 pfSense-install kernel: sdhci_xenon1-slot0: Blk size: 0x00007200 | Blk cnt:  0x00000008
Sep 19 15:49:40 pfSense-install kernel: sdhci_xenon1-slot0: Argument: 0x00884219 | Trn mode: 0x00000037
Sep 19 15:49:40 pfSense-install kernel: sdhci_xenon1-slot0: Present:  0x01f20000 | Host ctl: 0x00000025
Sep 19 15:49:40 pfSense-install kernel: sdhci_xenon1-slot0: Power:    0x0000000f | Blk gap:  0x00000000
Sep 19 15:49:40 pfSense-install kernel: sdhci_xenon1-slot0: Wake-up:  0x00000000 | Clock:    0x00000407
Sep 19 15:49:40 pfSense-install kernel: sdhci_xenon1-slot0: Timeout:  0x0000000c | Int stat: 0x00000000
Sep 19 15:49:40 pfSense-install kernel: sdhci_xenon1-slot0: Int enab: 0x01ff003b | Sig enab: 0x01ff003b
Sep 19 15:49:40 pfSense-install kernel: sdhci_xenon1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
Sep 19 15:49:40 pfSense-install kernel: sdhci_xenon1-slot0: Caps:     0x25ec0099 | Caps2:    0x0000af77
Sep 19 15:49:40 pfSense-install kernel: sdhci_xenon1-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
Sep 19 15:49:40 pfSense-install kernel: sdhci_xenon1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
Sep 19 15:49:40 pfSense-install kernel: sdhci_xenon1-slot0: ===========================================
Sep 19 15:49:40 pfSense-install kernel: mmcsd0: Error indicated: 1 Timeout

          How old is that 1100?

          The installer log should be in /tmp if it fails.

          E 1 Reply Last reply Reply Quote 0
          • E Offline
            extremesurf @stephenw10
            last edited by

            @stephenw10 Thanks for the info, I appreciate you taking the time to look at it. So sounds like it's likely not fixable?

            Here's the contents of /tmp/bsdinstall_log:

            DEBUG: Running installation step: auto
DEBUG: dialog.subr: DEBUG_SELF_INITIALIZE=[]
DEBUG: UNAME_S=[FreeBSD] UNAME_P=[aarch64] UNAME_R=[15.0-CURRENT]
DEBUG: common.subr: Successfully loaded.
DEBUG: f_include: file=[/usr/share/bsdconfig/dialog.subr]
DEBUG: dialog.subr: loading includes...
DEBUG: f_include: file=[/usr/share/bsdconfig/strings.subr]
DEBUG: strings.subr: Successfully loaded.
DEBUG: f_include: file=[/usr/share/bsdconfig/variable.subr]
DEBUG: variable.subr: loading includes...
DEBUG: f_include: file=[/usr/share/bsdconfig/dialog.subr]
DEBUG: f_include: file=[/usr/share/bsdconfig/strings.subr]
DEBUG: variable.subr: New variable VAR_CONFIG_FILE -> configFile
DEBUG: variable.subr: New variable VAR_DEBUG -> debug
DEBUG: variable.subr: New variable VAR_DEBUG_FILE -> debugFile
DEBUG: variable.subr: New variable VAR_DIRECTORY_PATH -> _directoryPath
DEBUG: variable.subr: New variable VAR_DOMAINNAME -> domainname
DEBUG: variable.subr: New variable VAR_EDITOR -> editor
DEBUG: variable.subr: New variable VAR_EXTRAS -> ifconfig_
DEBUG: variable.subr: New variable VAR_GATEWAY -> defaultrouter
DEBUG: variable.subr: New variable VAR_GROUP -> group
DEBUG: variable.subr: New variable VAR_GROUP_GID -> groupGid
DEBUG: variable.subr: New variable VAR_GROUP_MEMBERS -> groupMembers
DEBUG: variable.subr: New variable VAR_GROUP_PASSWORD -> groupPassword
DEBUG: variable.subr: New variable VAR_HOSTNAME -> hostname
DEBUG: variable.subr: New variable VAR_HTTP_DIR -> httpDirectory
DEBUG: variable.subr: New variable VAR_HTTP_FTP_MODE -> httpFtpMode
DEBUG: variable.subr: New variable VAR_HTTP_HOST -> httpHost
DEBUG: variable.subr: New variable VAR_HTTP_PATH -> _httpPath
DEBUG: variable.subr: New variable VAR_HTTP_PORT -> httpPort
DEBUG: variable.subr: New variable VAR_HTTP_PROXY -> httpProxy
DEBUG: variable.subr: New variable VAR_HTTP_PROXY_HOST -> httpProxyHost
DEBUG: variable.subr: New variable VAR_HTTP_PROXY_PATH -> _httpProxyPath
DEBUG: variable.subr: New variable VAR_HTTP_PROXY_PORT -> httpProxyPort
DEBUG: variable.subr: New variable VAR_IFCONFIG -> ifconfig_
DEBUG: variable.subr: New variable VAR_IPADDR -> ipaddr
DEBUG: variable.subr: New variable VAR_IPV6ADDR -> ipv6addr
DEBUG: variable.subr: New variable VAR_IPV6_ENABLE -> ipv6_activate_all_interfaces
DEBUG: variable.subr: New variable VAR_KEYMAP -> keymap
DEBUG: variable.subr: New variable VAR_MEDIA_TIMEOUT -> MEDIA_TIMEOUT
DEBUG: variable.subr: New variable VAR_MEDIA_TYPE -> mediaType
DEBUG: variable.subr: New variable VAR_NAMESERVER -> nameserver
DEBUG: variable.subr: New variable VAR_NETINTERACTIVE -> netInteractive
DEBUG: variable.subr: New variable VAR_NETMASK -> netmask
DEBUG: variable.subr: New variable VAR_NETWORK_DEVICE -> netDev
DEBUG: variable.subr: New variable VAR_NFS_HOST -> nfsHost
DEBUG: variable.subr: New variable VAR_NFS_PATH -> nfsPath
DEBUG: variable.subr: New variable VAR_NFS_SECURE -> nfs_reserved_port_only
DEBUG: variable.subr: New variable VAR_NFS_TCP -> nfs_use_tcp
DEBUG: variable.subr: New variable VAR_NFS_V3 -> nfs_use_v3
DEBUG: variable.subr: New variable VAR_NONINTERACTIVE -> nonInteractive
DEBUG: variable.subr: New variable VAR_NO_CONFIRM -> noConfirm
DEBUG: variable.subr: New variable VAR_NO_ERROR -> noError
DEBUG: variable.subr: New variable VAR_NO_INET6 -> noInet6
DEBUG: variable.subr: New variable VAR_PACKAGE -> package
DEBUG: variable.subr: New variable VAR_PKG_TMPDIR -> PKG_TMPDIR
DEBUG: variable.subr: New variable VAR_PORTS_PATH -> ports
DEBUG: variable.subr: New variable VAR_RELNAME -> releaseName
DEBUG: variable.subr: New variable VAR_SLOW_ETHER -> slowEthernetCard
DEBUG: variable.subr: New variable VAR_TRY_DHCP -> tryDHCP
DEBUG: variable.subr: New variable VAR_TRY_RTSOL -> tryRTSOL
DEBUG: variable.subr: New variable VAR_UFS_PATH -> ufs
DEBUG: variable.subr: New variable VAR_USER -> user
DEBUG: variable.subr: New variable VAR_USER_ACCOUNT_EXPIRE -> userAccountExpire
DEBUG: variable.subr: New variable VAR_USER_DOTFILES_CREATE -> userDotfilesCreate
DEBUG: variable.subr: New variable VAR_USER_GECOS -> userGecos
DEBUG: variable.subr: New variable VAR_USER_GID -> userGid
DEBUG: variable.subr: New variable VAR_USER_GROUPS -> userGroups
DEBUG: variable.subr: New variable VAR_USER_GROUP_DELETE -> userGroupDelete
DEBUG: variable.subr: New variable VAR_USER_HOME -> userHome
DEBUG: variable.subr: New variable VAR_USER_HOME_CREATE -> userHomeCreate
DEBUG: variable.subr: New variable VAR_USER_HOME_DELETE -> userHomeDelete
DEBUG: variable.subr: New variable VAR_USER_LOGIN_CLASS -> userLoginClass
DEBUG: variable.subr: New variable VAR_USER_PASSWORD -> userPassword
DEBUG: variable.subr: New variable VAR_USER_PASSWORD_EXPIRE -> userPasswordExpire
DEBUG: variable.subr: New variable VAR_USER_SHELL -> userShell
DEBUG: variable.subr: New variable VAR_USER_UID -> userUid
DEBUG: variable.subr: New variable VAR_ZFSINTERACTIVE -> zfsInteractive
DEBUG: variable.subr: VARIABLE_SELF_INITIALIZE=[1]
DEBUG: f_variable_set_defaults: Initializing defaults...
DEBUG: f_getvar: var=[debug] value=[1] r=0
DEBUG: f_getvar: var=[editor] value=[/usr/bin/ee] r=0
DEBUG: f_getvar: var=[hostname] value=[pfSense-install] r=0
DEBUG: f_getvar: var=[MEDIA_TIMEOUT] value=[300] r=0
DEBUG: f_getvar: var=[nfs_reserved_port_only] value=[NO] r=0
DEBUG: f_getvar: var=[nfs_use_tcp] value=[NO] r=0
DEBUG: f_getvar: var=[nfs_use_v3] value=[YES] r=0
DEBUG: f_getvar: var=[PKG_TMPDIR] value=[/var/tmp] r=0
DEBUG: f_getvar: var=[releaseName] value=[15.0-CURRENT] r=0
DEBUG: f_variable_set_defaults: Defaults initialized.
DEBUG: variable.subr: Successfully loaded.
DEBUG: f_include_lang: file=[/usr/libexec/bsdconfig/include/messages.subr] lang=[C.UTF-8]
DEBUG: dialog.subr: DIALOG_SELF_INITIALIZE=[1]
DEBUG: f_dialog_init: ARGV=[] GETOPTS_STDARGS=[dD:SX]
DEBUG: f_dialog_init: SECURE=[] USE_XDIALOG=[]
DEBUG: f_dialog_init: dialog(1) API initialized.
DEBUG: dialog.subr: Successfully loaded.
DEBUG: Began Installation at Thu Sep 19 15:51:47 UTC 2024
DEBUG: dialog.subr: DEBUG_SELF_INITIALIZE=[]
DEBUG: UNAME_S=[FreeBSD] UNAME_P=[aarch64] UNAME_R=[15.0-CURRENT]
DEBUG: common.subr: Successfully loaded.
DEBUG: f_debug_init: ARGV=[pfSense-netconfig] GETOPTS_STDARGS=[dD:]
DEBUG: f_debug_init: debug=[1] debugFile=[/tmp/bsdinstall_log]
DEBUG: Running installation step: pfSense-netconfig
DEBUG: f_dialog_max_size: bsddialog --print-maxsize = [MaxSize: 50, 169]
DEBUG: f_getvar: var=[height] value=[6] r=0
DEBUG: f_getvar: var=[width] value=[57] r=0
DEBUG: Running installation step: auto
DEBUG: dialog.subr: DEBUG_SELF_INITIALIZE=[]
DEBUG: UNAME_S=[FreeBSD] UNAME_P=[aarch64] UNAME_R=[15.0-CURRENT]
DEBUG: common.subr: Successfully loaded.
DEBUG: f_include: file=[/usr/share/bsdconfig/dialog.subr]
DEBUG: dialog.subr: loading includes...
DEBUG: f_include: file=[/usr/share/bsdconfig/strings.subr]
DEBUG: strings.subr: Successfully loaded.
DEBUG: f_include: file=[/usr/share/bsdconfig/variable.subr]
DEBUG: variable.subr: loading includes...
DEBUG: f_include: file=[/usr/share/bsdconfig/dialog.subr]
DEBUG: f_include: file=[/usr/share/bsdconfig/strings.subr]
DEBUG: variable.subr: New variable VAR_CONFIG_FILE -> configFile
DEBUG: variable.subr: New variable VAR_DEBUG -> debug
DEBUG: variable.subr: New variable VAR_DEBUG_FILE -> debugFile
DEBUG: variable.subr: New variable VAR_DIRECTORY_PATH -> _directoryPath
DEBUG: variable.subr: New variable VAR_DOMAINNAME -> domainname
DEBUG: variable.subr: New variable VAR_EDITOR -> editor
DEBUG: variable.subr: New variable VAR_EXTRAS -> ifconfig_
DEBUG: variable.subr: New variable VAR_GATEWAY -> defaultrouter
DEBUG: variable.subr: New variable VAR_GROUP -> group
DEBUG: variable.subr: New variable VAR_GROUP_GID -> groupGid
DEBUG: variable.subr: New variable VAR_GROUP_MEMBERS -> groupMembers
DEBUG: variable.subr: New variable VAR_GROUP_PASSWORD -> groupPassword
DEBUG: variable.subr: New variable VAR_HOSTNAME -> hostname
DEBUG: variable.subr: New variable VAR_HTTP_DIR -> httpDirectory
DEBUG: variable.subr: New variable VAR_HTTP_FTP_MODE -> httpFtpMode
DEBUG: variable.subr: New variable VAR_HTTP_HOST -> httpHost
DEBUG: variable.subr: New variable VAR_HTTP_PATH -> _httpPath
DEBUG: variable.subr: New variable VAR_HTTP_PORT -> httpPort
DEBUG: variable.subr: New variable VAR_HTTP_PROXY -> httpProxy
DEBUG: variable.subr: New variable VAR_HTTP_PROXY_HOST -> httpProxyHost
DEBUG: variable.subr: New variable VAR_HTTP_PROXY_PATH -> _httpProxyPath
DEBUG: variable.subr: New variable VAR_HTTP_PROXY_PORT -> httpProxyPort
DEBUG: variable.subr: New variable VAR_IFCONFIG -> ifconfig_
DEBUG: variable.subr: New variable VAR_IPADDR -> ipaddr
DEBUG: variable.subr: New variable VAR_IPV6ADDR -> ipv6addr
DEBUG: variable.subr: New variable VAR_IPV6_ENABLE -> ipv6_activate_all_interfaces
DEBUG: variable.subr: New variable VAR_KEYMAP -> keymap
DEBUG: variable.subr: New variable VAR_MEDIA_TIMEOUT -> MEDIA_TIMEOUT
DEBUG: variable.subr: New variable VAR_MEDIA_TYPE -> mediaType
DEBUG: variable.subr: New variable VAR_NAMESERVER -> nameserver
DEBUG: variable.subr: New variable VAR_NETINTERACTIVE -> netInteractive
DEBUG: variable.subr: New variable VAR_NETMASK -> netmask
DEBUG: variable.subr: New variable VAR_NETWORK_DEVICE -> netDev
DEBUG: variable.subr: New variable VAR_NFS_HOST -> nfsHost
DEBUG: variable.subr: New variable VAR_NFS_PATH -> nfsPath
DEBUG: variable.subr: New variable VAR_NFS_SECURE -> nfs_reserved_port_only
DEBUG: variable.subr: New variable VAR_NFS_TCP -> nfs_use_tcp
DEBUG: variable.subr: New variable VAR_NFS_V3 -> nfs_use_v3
DEBUG: variable.subr: New variable VAR_NONINTERACTIVE -> nonInteractive
DEBUG: variable.subr: New variable VAR_NO_CONFIRM -> noConfirm
DEBUG: variable.subr: New variable VAR_NO_ERROR -> noError
DEBUG: variable.subr: New variable VAR_NO_INET6 -> noInet6
DEBUG: variable.subr: New variable VAR_PACKAGE -> package
DEBUG: variable.subr: New variable VAR_PKG_TMPDIR -> PKG_TMPDIR
DEBUG: variable.subr: New variable VAR_PORTS_PATH -> ports
DEBUG: variable.subr: New variable VAR_RELNAME -> releaseName
DEBUG: variable.subr: New variable VAR_SLOW_ETHER -> slowEthernetCard
DEBUG: variable.subr: New variable VAR_TRY_DHCP -> tryDHCP
DEBUG: variable.subr: New variable VAR_TRY_RTSOL -> tryRTSOL
DEBUG: variable.subr: New variable VAR_UFS_PATH -> ufs
DEBUG: variable.subr: New variable VAR_USER -> user
DEBUG: variable.subr: New variable VAR_USER_ACCOUNT_EXPIRE -> userAccountExpire
DEBUG: variable.subr: New variable VAR_USER_DOTFILES_CREATE -> userDotfilesCreate
DEBUG: variable.subr: New variable VAR_USER_GECOS -> userGecos
DEBUG: variable.subr: New variable VAR_USER_GID -> userGid
DEBUG: variable.subr: New variable VAR_USER_GROUPS -> userGroups
DEBUG: variable.subr: New variable VAR_USER_GROUP_DELETE -> userGroupDelete
DEBUG: variable.subr: New variable VAR_USER_HOME -> userHome
DEBUG: variable.subr: New variable VAR_USER_HOME_CREATE -> userHomeCreate
DEBUG: variable.subr: New variable VAR_USER_HOME_DELETE -> userHomeDelete
DEBUG: variable.subr: New variable VAR_USER_LOGIN_CLASS -> userLoginClass
DEBUG: variable.subr: New variable VAR_USER_PASSWORD -> userPassword
DEBUG: variable.subr: New variable VAR_USER_PASSWORD_EXPIRE -> userPasswordExpire
DEBUG: variable.subr: New variable VAR_USER_SHELL -> userShell
DEBUG: variable.subr: New variable VAR_USER_UID -> userUid
DEBUG: variable.subr: New variable VAR_ZFSINTERACTIVE -> zfsInteractive
DEBUG: variable.subr: VARIABLE_SELF_INITIALIZE=[1]
DEBUG: f_variable_set_defaults: Initializing defaults...
DEBUG: f_getvar: var=[debug] value=[1] r=0
DEBUG: f_getvar: var=[editor] value=[/usr/bin/ee] r=0
DEBUG: f_getvar: var=[hostname] value=[pfSense-install] r=0
DEBUG: f_getvar: var=[MEDIA_TIMEOUT] value=[300] r=0
DEBUG: f_getvar: var=[nfs_reserved_port_only] value=[NO] r=0
DEBUG: f_getvar: var=[nfs_use_tcp] value=[NO] r=0
DEBUG: f_getvar: var=[nfs_use_v3] value=[YES] r=0
DEBUG: f_getvar: var=[PKG_TMPDIR] value=[/var/tmp] r=0
DEBUG: f_getvar: var=[releaseName] value=[15.0-CURRENT] r=0
DEBUG: f_variable_set_defaults: Defaults initialized.
DEBUG: variable.subr: Successfully loaded.
DEBUG: f_include_lang: file=[/usr/libexec/bsdconfig/include/messages.subr] lang=[C.UTF-8]
DEBUG: dialog.subr: DIALOG_SELF_INITIALIZE=[1]
DEBUG: f_dialog_init: ARGV=[] GETOPTS_STDARGS=[dD:SX]
DEBUG: f_dialog_init: SECURE=[] USE_XDIALOG=[]
DEBUG: f_dialog_init: dialog(1) API initialized.
DEBUG: dialog.subr: Successfully loaded.
DEBUG: Began Installation at Thu Sep 19 15:53:34 UTC 2024
DEBUG: dialog.subr: DEBUG_SELF_INITIALIZE=[]
DEBUG: UNAME_S=[FreeBSD] UNAME_P=[aarch64] UNAME_R=[15.0-CURRENT]
DEBUG: common.subr: Successfully loaded.
DEBUG: f_debug_init: ARGV=[pfSense-netconfig] GETOPTS_STDARGS=[dD:]
DEBUG: f_debug_init: debug=[1] debugFile=[/tmp/bsdinstall_log]
DEBUG: Running installation step: pfSense-netconfig
DEBUG: dialog.subr: DEBUG_SELF_INITIALIZE=[]
DEBUG: UNAME_S=[FreeBSD] UNAME_P=[aarch64] UNAME_R=[15.0-CURRENT]
DEBUG: common.subr: Successfully loaded.
DEBUG: f_debug_init: ARGV=[pfSense-sysinfo] GETOPTS_STDARGS=[dD:]
DEBUG: f_debug_init: debug=[1] debugFile=[/tmp/bsdinstall_log]
DEBUG: Running installation step: pfSense-sysinfo
DEBUG: f_getvar: var=[nonInteractive] value=[] r=1
DEBUG: smbios.system.maker=[Marvell]
DEBUG: smbios.system.product=[mvebu_armada-37xx]
DEBUG: smbios.system.version=[]
DEBUG: smbios.planar.maker=[Marvell]
DEBUG: smbios.planar.product=[mvebu_armada-37xx]
DEBUG: dialog.subr: DEBUG_SELF_INITIALIZE=[]
DEBUG: UNAME_S=[FreeBSD] UNAME_P=[aarch64] UNAME_R=[15.0-CURRENT]
DEBUG: common.subr: Successfully loaded.
DEBUG: f_debug_init: ARGV=[pfSense-disk-part] GETOPTS_STDARGS=[dD:]
DEBUG: f_debug_init: debug=[1] debugFile=[/tmp/bsdinstall_log]
DEBUG: Running installation step: pfSense-disk-part
DEBUG: dialog.subr: DEBUG_SELF_INITIALIZE=[]
DEBUG: UNAME_S=[FreeBSD] UNAME_P=[aarch64] UNAME_R=[15.0-CURRENT]
DEBUG: common.subr: Successfully loaded.
DEBUG: f_debug_init: ARGV=[umount] GETOPTS_STDARGS=[dD:]
DEBUG: f_debug_init: debug=[1] debugFile=[/tmp/bsdinstall_log]
DEBUG: Running installation step: umount
DEBUG: f_dialog_max_size: bsddialog --print-maxsize = [MaxSize: 50, 169]
DEBUG: f_getvar: var=[height] value=[8] r=0
DEBUG: f_getvar: var=[width] value=[57] r=0

            This SG-1100 is about five years old, but honestly, it’s been unreliable since day one, especially comparing it to the old ALIX.2D3 devices that were bulletproof by comparison. I’m not sure if that’s just the nature of these lower-cost devices, but I can’t imagine anyone depending on it for business use. I’ve had to reflash it multiple times over the years. If it’s ever unplugged without doing a proper Halt System, or if it’s not connected to a UPS, it almost never boots back up on its own.

            This time, the issue started when the UPS batteries died and the power went out. When power was restored, only the power light came on—it wouldn’t fully boot. It displayed the pfSense logo during startup but then threw several errors and failed to complete the boot process.

            1 Reply Last reply Reply Quote 0
            • stephenw10S Offline
              stephenw10 Netgate Administrator
              last edited by

              It does look like it might be an eMMC issue yes.

              You can now install to USB though as a workaround.

              1 Reply Last reply Reply Quote 0
              • E Offline
                extremesurf
                last edited by extremesurf

                Thanks for the information. The installer USB only seems to work through the USB 2.0 port, so would I just get a separate USB key to use in the USB 3.0 port to install to?

                Along the same lines, will a USB 3.0 key work, or should I stick with 2.0?

                And is 8GB still the minimum storage size required to install?

                1 Reply Last reply Reply Quote 0
                • stephenw10S Offline
                  stephenw10 Netgate Administrator
                  last edited by

                  The installer should work on either port but some USB memsticks will only work in one or the other. The uboot USB stack doesn't seem to handle fallback very well.

                  Yes, using a USB3 stick as the target device should be better in terms of boot time. In reality it doesn't make much difference in my experience. Other than at boot.

                  E 1 Reply Last reply Reply Quote 0
                  • E Offline
                    extremesurf @stephenw10
                    last edited by

                    @stephenw10 Thanks for your help. I got another USB key and put in the USB 3.0 slot to install the operating system, but it seems to fail with 'Invalid Partition 2':

                    Hit any key to stop autoboot:  0
Marvell>> usb reset
resetting USB...
USB0:   Register 2000104 NbrPorts 2
Starting the controller
USB XHCI 1.00
USB1:   USB EHCI 1.00
scanning bus 0 for devices... 2 USB Device(s) found
scanning bus 1 for devices... 2 USB Device(s) found
       scanning usb for storage devices... 2 Storage Device(s) found
Marvell>> run usbrecovery
switch to partitions #0, OK
mmc1(part 0) is current device

MMC erase: dev # 1, block # 0, count 4194304 ... 4194304 blocks erased: OK
resetting USB...
USB0:   Register 2000104 NbrPorts 2
Starting the controller
USB XHCI 1.00
USB1:   USB EHCI 1.00
scanning bus 0 for devices... 2 USB Device(s) found
scanning bus 1 for devices... EHCI timed out on TD - token=0x80008d80

      USB device not accepting new address (error=22)
1 USB Device(s) found
       scanning usb for storage devices... 1 Storage Device(s) found
** Invalid partition 2 **

                    It's a new flash drive that I haven't ever put data on, and after it failed I did try deleting the partitions and recreating, but I'm not sure if any specific prep is required on the flash drive?

                    Do you have any suggestions how to proceed beyond this?

                    1 Reply Last reply Reply Quote 0
                    • stephenw10S Offline
                      stephenw10 Netgate Administrator
                      last edited by

                      Yes it's probably trying to boot from empty drive. Try swapping the drives for the install.

                      Alternatively you can set a boot env to boot from the other device or manually set it at the uboot prompt.

                      E 1 Reply Last reply Reply Quote 0
                      • E Offline
                        extremesurf @stephenw10
                        last edited by

                        @stephenw10 This is the output when I switch the flash drives around. I should mention that previously I couldn't get the pfSense recovery flash drive to boot off USB 3.0 so I had to move it to USB 2.0.

                        Hit any key to stop autoboot:  0
Marvell>> usb reset
resetting USB...
USB0:   Register 2000104 NbrPorts 2
Starting the controller
USB XHCI 1.00
USB1:   USB EHCI 1.00
scanning bus 0 for devices... usb_new_device: Cannot read configuration, skipping device 13fe:5100
1 USB Device(s) found
scanning bus 1 for devices... 2 USB Device(s) found
       scanning usb for storage devices... 1 Storage Device(s) found
Marvell>> run usbrecovery
switch to partitions #0, OK
mmc1(part 0) is current device

MMC erase: dev # 1, block # 0, count 4194304 ... 4194304 blocks erased: OK
resetting USB...
USB0:   Register 2000104 NbrPorts 2
Starting the controller
USB XHCI 1.00
USB1:   USB EHCI 1.00
scanning bus 0 for devices... usb_new_device: Cannot read configuration, skipping device 13fe:5100
1 USB Device(s) found
scanning bus 1 for devices... 2 USB Device(s) found
       scanning usb for storage devices... 1 Storage Device(s) found
** Invalid partition 2 **

                        Can you elaborate on what the alternative options are? I wasn't sure how to set the boot env to boot the alternate or manually set it at the uboot prompt.

                        Thanks in advance, I really appreciate the help!

                        1 Reply Last reply Reply Quote 0
                        • stephenw10S Offline
                          stephenw10 Netgate Administrator
                          last edited by

                          Hmm, I would try a different USB stick.

                          Also be sure to completely power cycle the 1100 between attempts to reset the USB bus devices.

                          1 Reply Last reply Reply Quote 0
                          • First post
                            Last post
                          Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.