SG-1100 - Failed pfsense upgrade
-
@GeekyTim @stephenw10 Did you guys ever figure this out? I have an SG-1100 that after a power outage has the exact same issue, so I'm trying to reinstall it.
I have all of the identical output to the commands Tim ran (with the exception of my 16GB USB key being recognized differently which is to be expected).
I tried installing as UFS to rewrite the partition tables, but that fails with the same error. Trying ZFS again after still ends in "Installation Aborted". During the installation it quickly flashes:
mmcsd0: Error indicated: 1 Timeout mmcsd0: Error indicated: 1 Timeout mmcsd0: Error indicated: 1 TimeoutAfter the installer fails when I exit to the command prompt I don't seem to have an install.log file, all I have in /var/log/ that has been written today is:
- auth.log
- cron
- daemon.log
- messages
Here's the contents of the
messagesfile:Sep 19 15:49:15 pfSense-install newsyslog[1750]: logfile first created Sep 19 15:49:16 pfSense-install syslogd: kernel boot file is /boot/kernel/kernel Sep 19 15:49:16 pfSense-install kernel: ---<<BOOT>>--- Sep 19 15:49:16 pfSense-install kernel: GDB: debug ports: uart Sep 19 15:49:16 pfSense-install kernel: GDB: current port: uart Sep 19 15:49:16 pfSense-install kernel: KDB: debugger backends: ddb gdb Sep 19 15:49:16 pfSense-install kernel: KDB: current backend: ddb Sep 19 15:49:16 pfSense-install kernel: Copyright (c) 1992-2024 The FreeBSD Project. Sep 19 15:49:16 pfSense-install kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 Sep 19 15:49:16 pfSense-install kernel: The Regents of the University of California. All rights reserved. Sep 19 15:49:16 pfSense-install kernel: FreeBSD is a registered trademark of The FreeBSD Foundation. Sep 19 15:49:16 pfSense-install kernel: FreeBSD 15.0-CURRENT #0 installer-RELENG_v1_0-n256387-33bc50df25b: Thu Sep 19 15:09:39 UTC 2024 Sep 19 15:49:16 pfSense-install kernel: root@freebsd:/var/jenkins/workspace/pfSense-installer-snapshots-v1_0-main/obj/aarch64/HST5KqyO/var/jenkins/workspace/pfSense-installer-snapshots- v1_0-main/sources/FreeBSD-src-installer-RELENG_v1_0/arm64.aarch64/sys/pfSense-Installer arm64 Sep 19 15:49:16 pfSense-install kernel: FreeBSD clang version 18.1.6 (https://github.com/llvm/llvm-project.git llvmorg-18.1.6-0-g1118c2e05e67) Sep 19 15:49:16 pfSense-install kernel: VT: init without driver. Sep 19 15:49:16 pfSense-install kernel: module scmi already present! Sep 19 15:49:16 pfSense-install kernel: real memory = 1073664000 (1023 MB) Sep 19 15:49:16 pfSense-install kernel: avail memory = 982437888 (936 MB) Sep 19 15:49:16 pfSense-install kernel: Starting CPU 1 (1) Sep 19 15:49:16 pfSense-install kernel: FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs Sep 19 15:49:16 pfSense-install kernel: arc4random: WARNING: initial seeding bypassed the cryptographic random device because it was not yet seeded and the knob 'bypass_before_seeding' was enabled. Sep 19 15:49:16 pfSense-install kernel: ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE. Sep 19 15:49:16 pfSense-install kernel: ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. Sep 19 15:49:16 pfSense-install kernel: module_register_init: MOD_LOAD (ipw_bss_fw, 0xffff000000265c9c, 0) error 1 Sep 19 15:49:16 pfSense-install kernel: ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE. Sep 19 15:49:16 pfSense-install kernel: ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. Sep 19 15:49:16 pfSense-install kernel: module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffff000000265d54, 0) error 1 Sep 19 15:49:16 pfSense-install kernel: ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE. Sep 19 15:49:16 pfSense-install kernel: ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. Sep 19 15:49:16 pfSense-install kernel: module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffff000000265e0c, 0) error 1 Sep 19 15:49:16 pfSense-install kernel: iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE. Sep 19 15:49:16 pfSense-install kernel: iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. Sep 19 15:49:16 pfSense-install kernel: module_register_init: MOD_LOAD (iwi_bss_fw, 0xffff000000265ec4, 0) error 1 Sep 19 15:49:16 pfSense-install kernel: iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE. Sep 19 15:49:16 pfSense-install kernel: iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. Sep 19 15:49:16 pfSense-install kernel: module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffff000000265f7c, 0) error 1 Sep 19 15:49:16 pfSense-install kernel: iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE. Sep 19 15:49:16 pfSense-install kernel: iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. Sep 19 15:49:16 pfSense-install kernel: module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffff000000266034, 0) error 1 Sep 19 15:49:16 pfSense-install kernel: random: entropy device external interface Sep 19 15:49:16 pfSense-install kernel: wlan: mac acl policy registered Sep 19 15:49:16 pfSense-install kernel: kbd0 at kbdmux0 Sep 19 15:49:16 pfSense-install kernel: ofwbus0: <Open Firmware Device Tree> Sep 19 15:49:16 pfSense-install kernel: simplebus0: <Flattened device tree simple bus> on ofwbus0 Sep 19 15:49:16 pfSense-install kernel: simplebus1: <Flattened device tree simple bus> on simplebus0 Sep 19 15:49:16 pfSense-install kernel: ofw_firmware0: <OFW Firmware Group> on ofwbus0 Sep 19 15:49:16 pfSense-install kernel: simple_mfd0: <Simple MFD (Multi-Functions Device)> mem 0x13800-0x138ff,0x13c00-0x13c1f on simplebus1 Sep 19 15:49:16 pfSense-install kernel: simple_mfd1: <Simple MFD (Multi-Functions Device)> mem 0x18800-0x188ff,0x18c00-0x18c1f on simplebus1 Sep 19 15:49:16 pfSense-install kernel: gpio0: <Armada 37x0 North Bridge GPIO Controller> mem 0x13800-0x138ff,0x13c00-0x13c1f irq 29,30,31,32,33,34,35,36,37,38,39,40 on simple_mfd0 Sep 19 15:49:16 pfSense-install kernel: gpiobus0: <OFW GPIO bus> on gpio0 Sep 19 15:49:16 pfSense-install kernel: gpio1: <Armada 37x0 South Bridge GPIO Controller> mem 0x18800-0x188ff,0x18c00-0x18c1f irq 41,42,43,44,45 on simple_mfd1 Sep 19 15:49:16 pfSense-install kernel: gpiobus1: <OFW GPIO bus> on gpio1 Sep 19 15:49:16 pfSense-install kernel: gpioregulator0: <GPIO controlled regulator> on ofwbus0 Sep 19 15:49:16 pfSense-install kernel: a37x0-xtal0: <Marvell Armada 3700 Oscillator> mem 0x13800-0x138ff,0x13c00-0x13c1f on simple_mfd0 Sep 19 15:49:16 pfSense-install kernel: generic_timer0: <ARMv8 Generic Timer> irq 0,1,2,3 on ofwbus0 Sep 19 15:49:16 pfSense-install kernel: Timecounter "ARM MPCore Timecounter" frequency 12500000 Hz quality 1000 Sep 19 15:49:16 pfSense-install kernel: Event timer "ARM MPCore Eventtimer" frequency 12500000 Hz quality 1000 Sep 19 15:49:16 pfSense-install kernel: a37x0_tbg0: <Marvell Armada 3700 time base generators> mem 0x13200-0x132ff on simplebus1 Sep 19 15:49:16 pfSense-install kernel: a37x0_nb_periph_driver0: <marvell,armada-3700-nb-periph-clock> mem 0x13000-0x130ff on simplebus1 Sep 19 15:49:16 pfSense-install kernel: a37x0_sb_periph_driver0: <marvell,armada-3700-sb-periph-clock> mem 0x18000-0x180ff on simplebus1 Sep 19 15:49:16 pfSense-install kernel: cpulist0: <Open Firmware CPU Group> on ofwbus0 Sep 19 15:49:16 pfSense-install kernel: cpu0: <Open Firmware CPU> on cpulist0 Sep 19 15:49:16 pfSense-install kernel: pmu0: <Performance Monitoring Unit> irq 4 on ofwbus0 Sep 19 15:49:16 pfSense-install kernel: spi0: <Armada 37x0 SPI controller> mem 0x10600-0x10fff irq 6 on simplebus1 Sep 19 15:49:16 pfSense-install kernel: iichb0: <Marvell Armada 37x0 IIC controller> mem 0x11000-0x11023 irq 7 on simplebus1 Sep 19 15:49:16 pfSense-install kernel: iicbus0: <OFW I2C bus> on iichb0 Sep 19 15:49:16 pfSense-install kernel: iic0: <I2C generic I/O> on iicbus0 Sep 19 15:49:16 pfSense-install kernel: uart0: <Marvell Armada 3700 UART> mem 0x12000-0x12017 irq 9,10,11 on simplebus1 Sep 19 15:49:16 pfSense-install kernel: uart0: console (115200,n,8,1) Sep 19 15:49:16 pfSense-install kernel: gpioc0: <GPIO controller> on gpio0 Sep 19 15:49:16 pfSense-install kernel: gpioc1: <GPIO controller> on gpio1 Sep 19 15:49:16 pfSense-install kernel: mvneta0: <NETA controller> mem 0x30000-0x33fff irq 14 on simplebus1 Sep 19 15:49:16 pfSense-install kernel: mvneta0: version is 10 Sep 19 15:49:16 pfSense-install kernel: mdio0: <MDIO> on mvneta0 Sep 19 15:49:16 pfSense-install kernel: mdioproxy0: <MII/MDIO proxy, MDIO side> on mdio0 Sep 19 15:49:16 pfSense-install kernel: e6000sw0: <Marvell 88E6341> on mdio0 Sep 19 15:49:16 pfSense-install kernel: e6000sw0: multi-chip addressing mode (0x1) Sep 19 15:49:16 pfSense-install kernel: e6000sw0: CPU port at 0 Sep 19 15:49:16 pfSense-install kernel: e6000sw0: fixed port at 0 Sep 19 15:49:16 pfSense-install kernel: e6000sw0: PHY at port 1 Sep 19 15:49:16 pfSense-install kernel: miibus0: <MII bus> on e6000sw0 Sep 19 15:49:16 pfSense-install kernel: e1000phy0: <Marvell 88E1000 Gigabit PHY> PHY 17 on miibus0 Sep 19 15:49:16 pfSense-install kernel: e1000phy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto Sep 19 15:49:16 pfSense-install kernel: e6000sw0: PHY at port 2 Sep 19 15:49:16 pfSense-install kernel: miibus1: <MII bus> on e6000sw0 Sep 19 15:49:16 pfSense-install kernel: e1000phy1: <Marvell 88E1000 Gigabit PHY> PHY 18 on miibus1 Sep 19 15:49:16 pfSense-install kernel: e1000phy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto Sep 19 15:49:16 pfSense-install kernel: e6000sw0: PHY at port 3 Sep 19 15:49:16 pfSense-install kernel: miibus2: <MII bus> on e6000sw0 Sep 19 15:49:16 pfSense-install kernel: e1000phy2: <Marvell 88E1000 Gigabit PHY> PHY 19 on miibus2 Sep 19 15:49:16 pfSense-install kernel: e1000phy2: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto Sep 19 15:49:16 pfSense-install kernel: e6000sw0: switch is ready. Sep 19 15:49:16 pfSense-install kernel: etherswitch0: <Switch controller> on e6000sw0 Sep 19 15:49:16 pfSense-install kernel: mvneta0: Ethernet address: f0:ad:4e:0b:a1:76 Sep 19 15:49:16 pfSense-install kernel: xhci0: <Generic USB 3.0 controller> mem 0x58000-0x5bfff irq 16 on simplebus1 Sep 19 15:49:16 pfSense-install kernel: xhci0: 32 bytes context size, 32-bit DMA Sep 19 15:49:16 pfSense-install kernel: usbus0 on xhci0 Sep 19 15:49:16 pfSense-install kernel: ehci0: <Marvell Integrated USB 2.0 controller> mem 0x5e000-0x5efff irq 17 on simplebus1 Sep 19 15:49:16 pfSense-install kernel: usbus1: EHCI version 1.0 Sep 19 15:49:16 pfSense-install kernel: usbus1 on ehci0 Sep 19 15:49:16 pfSense-install kernel: sdhci_xenon0: <Armada Xenon SDHCI controller> mem 0xd0000-0xd02ff,0x1e808-0x1e80b irq 25 on simplebus1 Sep 19 15:49:16 pfSense-install kernel: sdhci_xenon1: <Armada Xenon SDHCI controller> mem 0xd8000-0xd82ff,0x17808-0x1780b irq 26 on simplebus1 Sep 19 15:49:16 pfSense-install kernel: mmc0: <MMC/SD bus> on sdhci_xenon1 Sep 19 15:49:16 pfSense-install kernel: ahci0: <AHCI SATA controller> mem 0xe0000-0xe0177 irq 27 on simplebus1 Sep 19 15:49:16 pfSense-install kernel: ahci0: AHCI v1.30 with 1 6Gbps ports, Port Multiplier supported with FBS Sep 19 15:49:16 pfSense-install kernel: ahcich0: <AHCI channel> at channel 0 on ahci0 Sep 19 15:49:16 pfSense-install kernel: device_attach: ahcich0 attach returned 6 Sep 19 15:49:16 pfSense-install kernel: pcib0: <Marvell Armada 3700 PCIe Bus Controller> mem 0xd0070000-0xd008ffff irq 5 on simplebus0 Sep 19 15:49:16 pfSense-install kernel: pcib0: link never came up Sep 19 15:49:16 pfSense-install kernel: pci0: <OFW PCI bus> on pcib0 Sep 19 15:49:16 pfSense-install kernel: gpioled0: <GPIO LEDs> on ofwbus0 Sep 19 15:49:16 pfSense-install kernel: armv8crypto0: <AES-CBC,AES-XTS,AES-GCM> Sep 19 15:49:16 pfSense-install kernel: Timecounters tick every 1.000 msec Sep 19 15:49:16 pfSense-install kernel: mvneta0: link state changed to UP Sep 19 15:49:16 pfSense-install kernel: spibus0: <OFW SPI bus> on spi0 Sep 19 15:49:16 pfSense-install kernel: mx25l0: <M25Pxx Flash Family> at cs 0 mode 0 on spibus0 Sep 19 15:49:16 pfSense-install kernel: mx25l0: device type mx25u3235f, size 4096K in 64 sectors of 64K, erase size 4K Sep 19 15:49:16 pfSense-install kernel: usbus0: 5.0Gbps Super Speed USB v3.0 Sep 19 15:49:16 pfSense-install kernel: usbus1: 480Mbps High Speed USB v2.0 Sep 19 15:49:16 pfSense-install kernel: ugen0.1: <Generic XHCI root HUB> at usbus0 Sep 19 15:49:16 pfSense-install kernel: uhub0 on usbus0 Sep 19 15:49:16 pfSense-install kernel: uhub0: <Generic XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 Sep 19 15:49:16 pfSense-install kernel: ugen1.1: <Marvell EHCI root HUB> at usbus1 Sep 19 15:49:16 pfSense-install kernel: uhub1 on usbus1 Sep 19 15:49:16 pfSense-install kernel: uhub1: <Marvell EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 Sep 19 15:49:16 pfSense-install kernel: mmc0: Failed to set VCCQ for card at relative address 2 Sep 19 15:49:16 pfSense-install kernel: mmcsd0: 8GB <MMCHC SEM08G 3.10 SN 825A8321 MFG 09/2016 by 69 0x0000> at mmc0 50.0MHz/8bit/65535-block Sep 19 15:49:16 pfSense-install kernel: mmcsd0boot0: 2MB partition 1 at mmcsd0 Sep 19 15:49:16 pfSense-install kernel: mmcsd0boot1: 2MB partition 2 at mmcsd0 Sep 19 15:49:16 pfSense-install kernel: mmcsd0rpmb: 2MB partition 3 at mmcsd0 Sep 19 15:49:16 pfSense-install kernel: Trying to mount root from ufs:/dev/ufs/pfSense_Install [ro,noatime]... Sep 19 15:49:16 pfSense-install kernel: CPU 0: ARM Cortex-A53 r0p4 affinity: 0 Sep 19 15:49:16 pfSense-install kernel: Cache Type = <64 byte D-cacheline,64 byte I-cacheline,VIPT ICache,64 byte ERG,64 byte CWG> Sep 19 15:49:16 pfSense-install kernel: Instruction Set Attributes 0 = <CRC32,SHA2,SHA1,AES+PMULL> Sep 19 15:49:16 pfSense-install kernel: Instruction Set Attributes 1 = <> Sep 19 15:49:16 pfSense-install kernel: Instruction Set Attributes 2 = <> Sep 19 15:49:16 pfSense-install kernel: Processor Features 0 = <GIC,AdvSIMD,FP,EL3 32,EL2 32,EL1 32,EL0 32> Sep 19 15:49:16 pfSense-install kernel: Processor Features 1 = <> Sep 19 15:49:16 pfSense-install kernel: Processor Features 2 = <> Sep 19 15:49:16 pfSense-install kernel: Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,1TB PA> Sep 19 15:49:16 pfSense-install kernel: Memory Model Features 1 = <8bit VMID> Sep 19 15:49:16 pfSense-install kernel: Memory Model Features 2 = <32bit CCIDX,48bit VA> Sep 19 15:49:16 pfSense-install kernel: Memory Model Features 3 = <> Sep 19 15:49:16 pfSense-install kernel: Memory Model Features 4 = <> Sep 19 15:49:16 pfSense-install kernel: Debug Features 0 = <DoubleLock,2 CTX BKPTs,4 Watchpoints,6 Breakpoints,PMUv3,Debugv8> Sep 19 15:49:16 pfSense-install kernel: Debug Features 1 = <> Sep 19 15:49:16 pfSense-install kernel: Auxiliary Features 0 = <> Sep 19 15:49:16 pfSense-install kernel: Auxiliary Features 1 = <> Sep 19 15:49:16 pfSense-install kernel: AArch32 Instruction Set Attributes 5 = <CRC32,SHA2,SHA1,AES+VMULL,SEVL> Sep 19 15:49:16 pfSense-install kernel: AArch32 Media and VFP Features 0 = <FPRound,FPSqrt,FPDivide,DP VFPv3+v4,SP VFPv3+v4,AdvSIMD> Sep 19 15:49:16 pfSense-install kernel: AArch32 Media and VFP Features 1 = <SIMDFMAC,FPHP DP Conv,SIMDHP SP Conv,SIMDSP,SIMDInt,SIMDLS,FPDNaN,FPFtZ> Sep 19 15:49:16 pfSense-install kernel: CPU 1: ARM Cortex-A53 r0p4 affinity: 1 Sep 19 15:49:16 pfSense-install kernel: gic0: using for IPIs Sep 19 15:49:16 pfSense-install kernel: Release APs...done Sep 19 15:49:16 pfSense-install kernel: TCP_ratelimit: Is now initialized Sep 19 15:49:16 pfSense-install kernel: uhub0: 2 ports with 2 removable, self powered Sep 19 15:49:16 pfSense-install kernel: uhub1: 1 port with 1 removable, self powered Sep 19 15:49:16 pfSense-install kernel: e6000sw0port1: link state changed to DOWN Sep 19 15:49:16 pfSense-install kernel: e6000sw0port2: link state changed to DOWN Sep 19 15:49:16 pfSense-install kernel: e6000sw0port3: link state changed to UP Sep 19 15:49:16 pfSense-install kernel: Root mount waiting for: usbus1 Sep 19 15:49:16 pfSense-install syslogd: last message repeated 2 times Sep 19 15:49:16 pfSense-install kernel: ugen1.2: <Kingston DataTraveler 111> at usbus1 Sep 19 15:49:16 pfSense-install kernel: umass0 on uhub1 Sep 19 15:49:16 pfSense-install kernel: umass0: <Kingston DataTraveler 111, class 0/0, rev 2.10/1.00, addr 2> on usbus1 Sep 19 15:49:16 pfSense-install kernel: mountroot: waiting for device /dev/ufs/pfSense_Install... Sep 19 15:49:16 pfSense-install kernel: da0 at umass-sim0 bus 0 scbus0 target 0 lun 0 Sep 19 15:49:16 pfSense-install kernel: da0: <Kingston DataTraveler 111 PMAP> Removable Direct Access SPC-2 SCSI device Sep 19 15:49:16 pfSense-install kernel: da0: Serial Number 0707291D9FD7D069 Sep 19 15:49:16 pfSense-install kernel: da0: 40.000MB/s transfers Sep 19 15:49:16 pfSense-install kernel: da0: 14786MB (30283008 512 byte sectors) Sep 19 15:49:16 pfSense-install kernel: da0: quirks=0x2<NO_6_BYTE> Sep 19 15:49:16 pfSense-install kernel: Warning: no time-of-day clock registered, system time will not be set accurately Sep 19 15:49:16 pfSense-install kernel: Dual Console: Video Primary, Serial Secondary Sep 19 15:49:16 pfSense-install kernel: random: unblocking device. Sep 19 15:49:16 pfSense-install kernel: lo0: link state changed to UP Sep 19 15:49:18 pfSense-install kernel: e6000sw0port3: link state changed to DOWN Sep 19 15:49:22 pfSense-install kernel: e6000sw0port3: link state changed to UP Sep 19 15:49:34 pfSense-install unbound[2046]: [2046:0] notice: init module 0: validator Sep 19 15:49:34 pfSense-install unbound[2046]: [2046:0] notice: init module 1: iterator Sep 19 15:49:36 pfSense-install dhclient[2096]: New IP Address (mvneta0.4090): 10.0.0.37 Sep 19 15:49:36 pfSense-install dhclient[2100]: New Subnet Mask (mvneta0.4090): 255.255.255.0 Sep 19 15:49:36 pfSense-install dhclient[2104]: New Broadcast Address (mvneta0.4090): 10.0.0.255 Sep 19 15:49:36 pfSense-install dhclient[2108]: New Routers (mvneta0.4090): 10.0.0.1 Sep 19 15:49:38 pfSense-install kernel: ZFS filesystem version: 5 Sep 19 15:49:38 pfSense-install kernel: ZFS storage pool version: features support (5000) Sep 19 15:49:40 pfSense-install kernel: mmcsd0: Error indicated: 1 Timeout Sep 19 15:49:40 pfSense-install kernel: sdhci_xenon1-slot0: Got AutoCMD12 error 0x0001, but there is no active command. Sep 19 15:49:40 pfSense-install kernel: sdhci_xenon1-slot0: ============== REGISTER DUMP ============== Sep 19 15:49:40 pfSense-install kernel: sdhci_xenon1-slot0: Sys addr: 0x08080000 | Version: 0x00000002 Sep 19 15:49:40 pfSense-install kernel: sdhci_xenon1-slot0: Blk size: 0x00007200 | Blk cnt: 0x00000008 Sep 19 15:49:40 pfSense-install kernel: sdhci_xenon1-slot0: Argument: 0x00884219 | Trn mode: 0x00000037 Sep 19 15:49:40 pfSense-install kernel: sdhci_xenon1-slot0: Present: 0x01f20000 | Host ctl: 0x00000025 Sep 19 15:49:40 pfSense-install kernel: sdhci_xenon1-slot0: Power: 0x0000000f | Blk gap: 0x00000000 Sep 19 15:49:40 pfSense-install kernel: sdhci_xenon1-slot0: Wake-up: 0x00000000 | Clock: 0x00000407 Sep 19 15:49:40 pfSense-install kernel: sdhci_xenon1-slot0: Timeout: 0x0000000c | Int stat: 0x00000000 Sep 19 15:49:40 pfSense-install kernel: sdhci_xenon1-slot0: Int enab: 0x01ff003b | Sig enab: 0x01ff003b Sep 19 15:49:40 pfSense-install kernel: sdhci_xenon1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000 Sep 19 15:49:40 pfSense-install kernel: sdhci_xenon1-slot0: Caps: 0x25ec0099 | Caps2: 0x0000af77 Sep 19 15:49:40 pfSense-install kernel: sdhci_xenon1-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000 Sep 19 15:49:40 pfSense-install kernel: sdhci_xenon1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000 Sep 19 15:49:40 pfSense-install kernel: sdhci_xenon1-slot0: =========================================== Sep 19 15:49:40 pfSense-install kernel: mmcsd0: Error indicated: 1 Timeout Sep 19 15:49:40 pfSense-install ZFS[2233]: vdev I/O failure, zpool=pfSense path=/dev/mmcsd0s3a offset=7540580352 size=8192 error=5 Sep 19 15:49:40 pfSense-install ZFS[2237]: vdev I/O failure, zpool=pfSense path=/dev/mmcsd0s3a offset=7540842496 size=8192 error=5 Sep 19 15:49:40 pfSense-install ZFS[2241]: vdev I/O failure, zpool=pfSense path=/dev/mmcsd0s3a offset=270336 size=8192 error=5 Sep 19 15:49:40 pfSense-install ZFS[2245]: vdev probe failure, zpool=pfSense path=/dev/mmcsd0s3a Sep 19 15:49:40 pfSense-install ZFS[2252]: pool I/O failure, zpool=pfSense error=6 Sep 19 15:49:40 pfSense-install kernel: mmcsd0: Error indicated: 1 Timeout Sep 19 15:49:40 pfSense-install syslogd: last message repeated 2 times Sep 19 15:49:40 pfSense-install ZFS[2257]: pool I/O failure, zpool=pfSense error=6 Sep 19 15:49:41 pfSense-install ZFS[2265]: pool log replay failure, zpool=pfSense Sep 19 15:49:41 pfSense-install ZFS[2273]: vdev probe failure, zpool=pfSense path=/dev/mmcsd0s3a Sep 19 15:49:41 pfSense-install ZFS[2278]: vdev state changed, pool_guid=8210094690085210189 vdev_guid=2433099826784048730 Sep 19 15:49:41 pfSense-install ZFS[2282]: failed to load zpool pfSense Sep 19 15:51:46 pfSense-install unbound[2308]: [2308:0] notice: init module 0: validator Sep 19 15:51:46 pfSense-install unbound[2308]: [2308:0] notice: init module 1: iterator Sep 19 15:51:46 pfSense-install unbound[2329]: [2329:0] notice: init module 0: validator Sep 19 15:51:46 pfSense-install unbound[2329]: [2329:0] notice: init module 1: iterator Sep 19 15:51:47 pfSense-install dhclient[2078]: connection closed Sep 19 15:51:47 pfSense-install dhclient[2078]: exiting. Sep 19 15:51:47 pfSense-install dhclient[2358]: New IP Address (mvneta0.4090): 10.0.0.37 Sep 19 15:51:47 pfSense-install dhclient[2362]: New Subnet Mask (mvneta0.4090): 255.255.255.0 Sep 19 15:51:47 pfSense-install dhclient[2366]: New Broadcast Address (mvneta0.4090): 10.0.0.255 Sep 19 15:51:47 pfSense-install dhclient[2370]: New Routers (mvneta0.4090): 10.0.0.1 Sep 19 15:52:16 pfSense-install ntpd[2586]: ntpd 4.2.8p18@1.4062-o Thu Sep 19 15:33:52 UTC 2024 (1): Starting Sep 19 15:52:16 pfSense-install ntpd[2586]: Command line: /usr/local/sbin/ntpd -g -q -c /tmp/tmp.Rgzdr37vkE 216.239.35.0 216.239.35.4 216.239.35.8 216.239.35.12 Sep 19 15:52:16 pfSense-install ntpd[2586]: ---------------------------------------------------- Sep 19 15:52:16 pfSense-install ntpd[2586]: ntp-4 is maintained by Network Time Foundation, Sep 19 15:52:16 pfSense-install ntpd[2586]: Inc. (NTF), a non-profit 501(c)(3) public-benefit Sep 19 15:52:16 pfSense-install ntpd[2586]: corporation. Support and training for ntp-4 are Sep 19 15:52:16 pfSense-install ntpd[2586]: available at https://www.nwtime.org/support Sep 19 15:52:16 pfSense-install ntpd[2586]: ---------------------------------------------------- Oct 20 20:25:18 pfSense-install ntpd[2586]: ntpd: time set +34230775.385597 s Oct 20 20:26:22 pfSense-install kernel: mmcsd0: Error indicated: 1 Timeout Oct 20 20:26:22 pfSense-install syslogd: last message repeated 4 times Oct 20 20:26:34 pfSense-install unbound[2791]: [2791:0] notice: init module 0: validator Oct 20 20:26:34 pfSense-install unbound[2791]: [2791:0] notice: init module 1: iterator Oct 20 20:26:35 pfSense-install unbound[2832]: [2832:0] notice: init module 0: validator Oct 20 20:26:35 pfSense-install unbound[2832]: [2832:0] notice: init module 1: iterator Oct 20 20:26:37 pfSense-install dhclient[2914]: New IP Address (mvneta0.4090): 10.0.0.37 Oct 20 20:26:37 pfSense-install dhclient[2918]: New Subnet Mask (mvneta0.4090): 255.255.255.0 Oct 20 20:26:37 pfSense-install dhclient[2922]: New Broadcast Address (mvneta0.4090): 10.0.0.255 Oct 20 20:26:37 pfSense-install dhclient[2926]: New Routers (mvneta0.4090): 10.0.0.1Even before the install process starts, after running
run usbrecoveryit has the related messages as it's loading.Is it bricked, or did you come up with a solution or anything else I can try?
-
This looks like a low level issue with the eMMC:
Sep 19 15:49:40 pfSense-install kernel: mmcsd0: Error indicated: 1 Timeout Sep 19 15:49:40 pfSense-install kernel: sdhci_xenon1-slot0: Got AutoCMD12 error 0x0001, but there is no active command. Sep 19 15:49:40 pfSense-install kernel: sdhci_xenon1-slot0: ============== REGISTER DUMP ============== Sep 19 15:49:40 pfSense-install kernel: sdhci_xenon1-slot0: Sys addr: 0x08080000 | Version: 0x00000002 Sep 19 15:49:40 pfSense-install kernel: sdhci_xenon1-slot0: Blk size: 0x00007200 | Blk cnt: 0x00000008 Sep 19 15:49:40 pfSense-install kernel: sdhci_xenon1-slot0: Argument: 0x00884219 | Trn mode: 0x00000037 Sep 19 15:49:40 pfSense-install kernel: sdhci_xenon1-slot0: Present: 0x01f20000 | Host ctl: 0x00000025 Sep 19 15:49:40 pfSense-install kernel: sdhci_xenon1-slot0: Power: 0x0000000f | Blk gap: 0x00000000 Sep 19 15:49:40 pfSense-install kernel: sdhci_xenon1-slot0: Wake-up: 0x00000000 | Clock: 0x00000407 Sep 19 15:49:40 pfSense-install kernel: sdhci_xenon1-slot0: Timeout: 0x0000000c | Int stat: 0x00000000 Sep 19 15:49:40 pfSense-install kernel: sdhci_xenon1-slot0: Int enab: 0x01ff003b | Sig enab: 0x01ff003b Sep 19 15:49:40 pfSense-install kernel: sdhci_xenon1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000 Sep 19 15:49:40 pfSense-install kernel: sdhci_xenon1-slot0: Caps: 0x25ec0099 | Caps2: 0x0000af77 Sep 19 15:49:40 pfSense-install kernel: sdhci_xenon1-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000 Sep 19 15:49:40 pfSense-install kernel: sdhci_xenon1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000 Sep 19 15:49:40 pfSense-install kernel: sdhci_xenon1-slot0: =========================================== Sep 19 15:49:40 pfSense-install kernel: mmcsd0: Error indicated: 1 TimeoutHow old is that 1100?
The installer log should be in /tmp if it fails.
-
@stephenw10 Thanks for the info, I appreciate you taking the time to look at it. So sounds like it's likely not fixable?
Here's the contents of
/tmp/bsdinstall_log:DEBUG: Running installation step: auto DEBUG: dialog.subr: DEBUG_SELF_INITIALIZE=[] DEBUG: UNAME_S=[FreeBSD] UNAME_P=[aarch64] UNAME_R=[15.0-CURRENT] DEBUG: common.subr: Successfully loaded. DEBUG: f_include: file=[/usr/share/bsdconfig/dialog.subr] DEBUG: dialog.subr: loading includes... DEBUG: f_include: file=[/usr/share/bsdconfig/strings.subr] DEBUG: strings.subr: Successfully loaded. DEBUG: f_include: file=[/usr/share/bsdconfig/variable.subr] DEBUG: variable.subr: loading includes... DEBUG: f_include: file=[/usr/share/bsdconfig/dialog.subr] DEBUG: f_include: file=[/usr/share/bsdconfig/strings.subr] DEBUG: variable.subr: New variable VAR_CONFIG_FILE -> configFile DEBUG: variable.subr: New variable VAR_DEBUG -> debug DEBUG: variable.subr: New variable VAR_DEBUG_FILE -> debugFile DEBUG: variable.subr: New variable VAR_DIRECTORY_PATH -> _directoryPath DEBUG: variable.subr: New variable VAR_DOMAINNAME -> domainname DEBUG: variable.subr: New variable VAR_EDITOR -> editor DEBUG: variable.subr: New variable VAR_EXTRAS -> ifconfig_ DEBUG: variable.subr: New variable VAR_GATEWAY -> defaultrouter DEBUG: variable.subr: New variable VAR_GROUP -> group DEBUG: variable.subr: New variable VAR_GROUP_GID -> groupGid DEBUG: variable.subr: New variable VAR_GROUP_MEMBERS -> groupMembers DEBUG: variable.subr: New variable VAR_GROUP_PASSWORD -> groupPassword DEBUG: variable.subr: New variable VAR_HOSTNAME -> hostname DEBUG: variable.subr: New variable VAR_HTTP_DIR -> httpDirectory DEBUG: variable.subr: New variable VAR_HTTP_FTP_MODE -> httpFtpMode DEBUG: variable.subr: New variable VAR_HTTP_HOST -> httpHost DEBUG: variable.subr: New variable VAR_HTTP_PATH -> _httpPath DEBUG: variable.subr: New variable VAR_HTTP_PORT -> httpPort DEBUG: variable.subr: New variable VAR_HTTP_PROXY -> httpProxy DEBUG: variable.subr: New variable VAR_HTTP_PROXY_HOST -> httpProxyHost DEBUG: variable.subr: New variable VAR_HTTP_PROXY_PATH -> _httpProxyPath DEBUG: variable.subr: New variable VAR_HTTP_PROXY_PORT -> httpProxyPort DEBUG: variable.subr: New variable VAR_IFCONFIG -> ifconfig_ DEBUG: variable.subr: New variable VAR_IPADDR -> ipaddr DEBUG: variable.subr: New variable VAR_IPV6ADDR -> ipv6addr DEBUG: variable.subr: New variable VAR_IPV6_ENABLE -> ipv6_activate_all_interfaces DEBUG: variable.subr: New variable VAR_KEYMAP -> keymap DEBUG: variable.subr: New variable VAR_MEDIA_TIMEOUT -> MEDIA_TIMEOUT DEBUG: variable.subr: New variable VAR_MEDIA_TYPE -> mediaType DEBUG: variable.subr: New variable VAR_NAMESERVER -> nameserver DEBUG: variable.subr: New variable VAR_NETINTERACTIVE -> netInteractive DEBUG: variable.subr: New variable VAR_NETMASK -> netmask DEBUG: variable.subr: New variable VAR_NETWORK_DEVICE -> netDev DEBUG: variable.subr: New variable VAR_NFS_HOST -> nfsHost DEBUG: variable.subr: New variable VAR_NFS_PATH -> nfsPath DEBUG: variable.subr: New variable VAR_NFS_SECURE -> nfs_reserved_port_only DEBUG: variable.subr: New variable VAR_NFS_TCP -> nfs_use_tcp DEBUG: variable.subr: New variable VAR_NFS_V3 -> nfs_use_v3 DEBUG: variable.subr: New variable VAR_NONINTERACTIVE -> nonInteractive DEBUG: variable.subr: New variable VAR_NO_CONFIRM -> noConfirm DEBUG: variable.subr: New variable VAR_NO_ERROR -> noError DEBUG: variable.subr: New variable VAR_NO_INET6 -> noInet6 DEBUG: variable.subr: New variable VAR_PACKAGE -> package DEBUG: variable.subr: New variable VAR_PKG_TMPDIR -> PKG_TMPDIR DEBUG: variable.subr: New variable VAR_PORTS_PATH -> ports DEBUG: variable.subr: New variable VAR_RELNAME -> releaseName DEBUG: variable.subr: New variable VAR_SLOW_ETHER -> slowEthernetCard DEBUG: variable.subr: New variable VAR_TRY_DHCP -> tryDHCP DEBUG: variable.subr: New variable VAR_TRY_RTSOL -> tryRTSOL DEBUG: variable.subr: New variable VAR_UFS_PATH -> ufs DEBUG: variable.subr: New variable VAR_USER -> user DEBUG: variable.subr: New variable VAR_USER_ACCOUNT_EXPIRE -> userAccountExpire DEBUG: variable.subr: New variable VAR_USER_DOTFILES_CREATE -> userDotfilesCreate DEBUG: variable.subr: New variable VAR_USER_GECOS -> userGecos DEBUG: variable.subr: New variable VAR_USER_GID -> userGid DEBUG: variable.subr: New variable VAR_USER_GROUPS -> userGroups DEBUG: variable.subr: New variable VAR_USER_GROUP_DELETE -> userGroupDelete DEBUG: variable.subr: New variable VAR_USER_HOME -> userHome DEBUG: variable.subr: New variable VAR_USER_HOME_CREATE -> userHomeCreate DEBUG: variable.subr: New variable VAR_USER_HOME_DELETE -> userHomeDelete DEBUG: variable.subr: New variable VAR_USER_LOGIN_CLASS -> userLoginClass DEBUG: variable.subr: New variable VAR_USER_PASSWORD -> userPassword DEBUG: variable.subr: New variable VAR_USER_PASSWORD_EXPIRE -> userPasswordExpire DEBUG: variable.subr: New variable VAR_USER_SHELL -> userShell DEBUG: variable.subr: New variable VAR_USER_UID -> userUid DEBUG: variable.subr: New variable VAR_ZFSINTERACTIVE -> zfsInteractive DEBUG: variable.subr: VARIABLE_SELF_INITIALIZE=[1] DEBUG: f_variable_set_defaults: Initializing defaults... DEBUG: f_getvar: var=[debug] value=[1] r=0 DEBUG: f_getvar: var=[editor] value=[/usr/bin/ee] r=0 DEBUG: f_getvar: var=[hostname] value=[pfSense-install] r=0 DEBUG: f_getvar: var=[MEDIA_TIMEOUT] value=[300] r=0 DEBUG: f_getvar: var=[nfs_reserved_port_only] value=[NO] r=0 DEBUG: f_getvar: var=[nfs_use_tcp] value=[NO] r=0 DEBUG: f_getvar: var=[nfs_use_v3] value=[YES] r=0 DEBUG: f_getvar: var=[PKG_TMPDIR] value=[/var/tmp] r=0 DEBUG: f_getvar: var=[releaseName] value=[15.0-CURRENT] r=0 DEBUG: f_variable_set_defaults: Defaults initialized. DEBUG: variable.subr: Successfully loaded. DEBUG: f_include_lang: file=[/usr/libexec/bsdconfig/include/messages.subr] lang=[C.UTF-8] DEBUG: dialog.subr: DIALOG_SELF_INITIALIZE=[1] DEBUG: f_dialog_init: ARGV=[] GETOPTS_STDARGS=[dD:SX] DEBUG: f_dialog_init: SECURE=[] USE_XDIALOG=[] DEBUG: f_dialog_init: dialog(1) API initialized. DEBUG: dialog.subr: Successfully loaded. DEBUG: Began Installation at Thu Sep 19 15:51:47 UTC 2024 DEBUG: dialog.subr: DEBUG_SELF_INITIALIZE=[] DEBUG: UNAME_S=[FreeBSD] UNAME_P=[aarch64] UNAME_R=[15.0-CURRENT] DEBUG: common.subr: Successfully loaded. DEBUG: f_debug_init: ARGV=[pfSense-netconfig] GETOPTS_STDARGS=[dD:] DEBUG: f_debug_init: debug=[1] debugFile=[/tmp/bsdinstall_log] DEBUG: Running installation step: pfSense-netconfig DEBUG: f_dialog_max_size: bsddialog --print-maxsize = [MaxSize: 50, 169] DEBUG: f_getvar: var=[height] value=[6] r=0 DEBUG: f_getvar: var=[width] value=[57] r=0 DEBUG: Running installation step: auto DEBUG: dialog.subr: DEBUG_SELF_INITIALIZE=[] DEBUG: UNAME_S=[FreeBSD] UNAME_P=[aarch64] UNAME_R=[15.0-CURRENT] DEBUG: common.subr: Successfully loaded. DEBUG: f_include: file=[/usr/share/bsdconfig/dialog.subr] DEBUG: dialog.subr: loading includes... DEBUG: f_include: file=[/usr/share/bsdconfig/strings.subr] DEBUG: strings.subr: Successfully loaded. DEBUG: f_include: file=[/usr/share/bsdconfig/variable.subr] DEBUG: variable.subr: loading includes... DEBUG: f_include: file=[/usr/share/bsdconfig/dialog.subr] DEBUG: f_include: file=[/usr/share/bsdconfig/strings.subr] DEBUG: variable.subr: New variable VAR_CONFIG_FILE -> configFile DEBUG: variable.subr: New variable VAR_DEBUG -> debug DEBUG: variable.subr: New variable VAR_DEBUG_FILE -> debugFile DEBUG: variable.subr: New variable VAR_DIRECTORY_PATH -> _directoryPath DEBUG: variable.subr: New variable VAR_DOMAINNAME -> domainname DEBUG: variable.subr: New variable VAR_EDITOR -> editor DEBUG: variable.subr: New variable VAR_EXTRAS -> ifconfig_ DEBUG: variable.subr: New variable VAR_GATEWAY -> defaultrouter DEBUG: variable.subr: New variable VAR_GROUP -> group DEBUG: variable.subr: New variable VAR_GROUP_GID -> groupGid DEBUG: variable.subr: New variable VAR_GROUP_MEMBERS -> groupMembers DEBUG: variable.subr: New variable VAR_GROUP_PASSWORD -> groupPassword DEBUG: variable.subr: New variable VAR_HOSTNAME -> hostname DEBUG: variable.subr: New variable VAR_HTTP_DIR -> httpDirectory DEBUG: variable.subr: New variable VAR_HTTP_FTP_MODE -> httpFtpMode DEBUG: variable.subr: New variable VAR_HTTP_HOST -> httpHost DEBUG: variable.subr: New variable VAR_HTTP_PATH -> _httpPath DEBUG: variable.subr: New variable VAR_HTTP_PORT -> httpPort DEBUG: variable.subr: New variable VAR_HTTP_PROXY -> httpProxy DEBUG: variable.subr: New variable VAR_HTTP_PROXY_HOST -> httpProxyHost DEBUG: variable.subr: New variable VAR_HTTP_PROXY_PATH -> _httpProxyPath DEBUG: variable.subr: New variable VAR_HTTP_PROXY_PORT -> httpProxyPort DEBUG: variable.subr: New variable VAR_IFCONFIG -> ifconfig_ DEBUG: variable.subr: New variable VAR_IPADDR -> ipaddr DEBUG: variable.subr: New variable VAR_IPV6ADDR -> ipv6addr DEBUG: variable.subr: New variable VAR_IPV6_ENABLE -> ipv6_activate_all_interfaces DEBUG: variable.subr: New variable VAR_KEYMAP -> keymap DEBUG: variable.subr: New variable VAR_MEDIA_TIMEOUT -> MEDIA_TIMEOUT DEBUG: variable.subr: New variable VAR_MEDIA_TYPE -> mediaType DEBUG: variable.subr: New variable VAR_NAMESERVER -> nameserver DEBUG: variable.subr: New variable VAR_NETINTERACTIVE -> netInteractive DEBUG: variable.subr: New variable VAR_NETMASK -> netmask DEBUG: variable.subr: New variable VAR_NETWORK_DEVICE -> netDev DEBUG: variable.subr: New variable VAR_NFS_HOST -> nfsHost DEBUG: variable.subr: New variable VAR_NFS_PATH -> nfsPath DEBUG: variable.subr: New variable VAR_NFS_SECURE -> nfs_reserved_port_only DEBUG: variable.subr: New variable VAR_NFS_TCP -> nfs_use_tcp DEBUG: variable.subr: New variable VAR_NFS_V3 -> nfs_use_v3 DEBUG: variable.subr: New variable VAR_NONINTERACTIVE -> nonInteractive DEBUG: variable.subr: New variable VAR_NO_CONFIRM -> noConfirm DEBUG: variable.subr: New variable VAR_NO_ERROR -> noError DEBUG: variable.subr: New variable VAR_NO_INET6 -> noInet6 DEBUG: variable.subr: New variable VAR_PACKAGE -> package DEBUG: variable.subr: New variable VAR_PKG_TMPDIR -> PKG_TMPDIR DEBUG: variable.subr: New variable VAR_PORTS_PATH -> ports DEBUG: variable.subr: New variable VAR_RELNAME -> releaseName DEBUG: variable.subr: New variable VAR_SLOW_ETHER -> slowEthernetCard DEBUG: variable.subr: New variable VAR_TRY_DHCP -> tryDHCP DEBUG: variable.subr: New variable VAR_TRY_RTSOL -> tryRTSOL DEBUG: variable.subr: New variable VAR_UFS_PATH -> ufs DEBUG: variable.subr: New variable VAR_USER -> user DEBUG: variable.subr: New variable VAR_USER_ACCOUNT_EXPIRE -> userAccountExpire DEBUG: variable.subr: New variable VAR_USER_DOTFILES_CREATE -> userDotfilesCreate DEBUG: variable.subr: New variable VAR_USER_GECOS -> userGecos DEBUG: variable.subr: New variable VAR_USER_GID -> userGid DEBUG: variable.subr: New variable VAR_USER_GROUPS -> userGroups DEBUG: variable.subr: New variable VAR_USER_GROUP_DELETE -> userGroupDelete DEBUG: variable.subr: New variable VAR_USER_HOME -> userHome DEBUG: variable.subr: New variable VAR_USER_HOME_CREATE -> userHomeCreate DEBUG: variable.subr: New variable VAR_USER_HOME_DELETE -> userHomeDelete DEBUG: variable.subr: New variable VAR_USER_LOGIN_CLASS -> userLoginClass DEBUG: variable.subr: New variable VAR_USER_PASSWORD -> userPassword DEBUG: variable.subr: New variable VAR_USER_PASSWORD_EXPIRE -> userPasswordExpire DEBUG: variable.subr: New variable VAR_USER_SHELL -> userShell DEBUG: variable.subr: New variable VAR_USER_UID -> userUid DEBUG: variable.subr: New variable VAR_ZFSINTERACTIVE -> zfsInteractive DEBUG: variable.subr: VARIABLE_SELF_INITIALIZE=[1] DEBUG: f_variable_set_defaults: Initializing defaults... DEBUG: f_getvar: var=[debug] value=[1] r=0 DEBUG: f_getvar: var=[editor] value=[/usr/bin/ee] r=0 DEBUG: f_getvar: var=[hostname] value=[pfSense-install] r=0 DEBUG: f_getvar: var=[MEDIA_TIMEOUT] value=[300] r=0 DEBUG: f_getvar: var=[nfs_reserved_port_only] value=[NO] r=0 DEBUG: f_getvar: var=[nfs_use_tcp] value=[NO] r=0 DEBUG: f_getvar: var=[nfs_use_v3] value=[YES] r=0 DEBUG: f_getvar: var=[PKG_TMPDIR] value=[/var/tmp] r=0 DEBUG: f_getvar: var=[releaseName] value=[15.0-CURRENT] r=0 DEBUG: f_variable_set_defaults: Defaults initialized. DEBUG: variable.subr: Successfully loaded. DEBUG: f_include_lang: file=[/usr/libexec/bsdconfig/include/messages.subr] lang=[C.UTF-8] DEBUG: dialog.subr: DIALOG_SELF_INITIALIZE=[1] DEBUG: f_dialog_init: ARGV=[] GETOPTS_STDARGS=[dD:SX] DEBUG: f_dialog_init: SECURE=[] USE_XDIALOG=[] DEBUG: f_dialog_init: dialog(1) API initialized. DEBUG: dialog.subr: Successfully loaded. DEBUG: Began Installation at Thu Sep 19 15:53:34 UTC 2024 DEBUG: dialog.subr: DEBUG_SELF_INITIALIZE=[] DEBUG: UNAME_S=[FreeBSD] UNAME_P=[aarch64] UNAME_R=[15.0-CURRENT] DEBUG: common.subr: Successfully loaded. DEBUG: f_debug_init: ARGV=[pfSense-netconfig] GETOPTS_STDARGS=[dD:] DEBUG: f_debug_init: debug=[1] debugFile=[/tmp/bsdinstall_log] DEBUG: Running installation step: pfSense-netconfig DEBUG: dialog.subr: DEBUG_SELF_INITIALIZE=[] DEBUG: UNAME_S=[FreeBSD] UNAME_P=[aarch64] UNAME_R=[15.0-CURRENT] DEBUG: common.subr: Successfully loaded. DEBUG: f_debug_init: ARGV=[pfSense-sysinfo] GETOPTS_STDARGS=[dD:] DEBUG: f_debug_init: debug=[1] debugFile=[/tmp/bsdinstall_log] DEBUG: Running installation step: pfSense-sysinfo DEBUG: f_getvar: var=[nonInteractive] value=[] r=1 DEBUG: smbios.system.maker=[Marvell] DEBUG: smbios.system.product=[mvebu_armada-37xx] DEBUG: smbios.system.version=[] DEBUG: smbios.planar.maker=[Marvell] DEBUG: smbios.planar.product=[mvebu_armada-37xx] DEBUG: dialog.subr: DEBUG_SELF_INITIALIZE=[] DEBUG: UNAME_S=[FreeBSD] UNAME_P=[aarch64] UNAME_R=[15.0-CURRENT] DEBUG: common.subr: Successfully loaded. DEBUG: f_debug_init: ARGV=[pfSense-disk-part] GETOPTS_STDARGS=[dD:] DEBUG: f_debug_init: debug=[1] debugFile=[/tmp/bsdinstall_log] DEBUG: Running installation step: pfSense-disk-part DEBUG: dialog.subr: DEBUG_SELF_INITIALIZE=[] DEBUG: UNAME_S=[FreeBSD] UNAME_P=[aarch64] UNAME_R=[15.0-CURRENT] DEBUG: common.subr: Successfully loaded. DEBUG: f_debug_init: ARGV=[umount] GETOPTS_STDARGS=[dD:] DEBUG: f_debug_init: debug=[1] debugFile=[/tmp/bsdinstall_log] DEBUG: Running installation step: umount DEBUG: f_dialog_max_size: bsddialog --print-maxsize = [MaxSize: 50, 169] DEBUG: f_getvar: var=[height] value=[8] r=0 DEBUG: f_getvar: var=[width] value=[57] r=0This SG-1100 is about five years old, but honestly, it’s been unreliable since day one, especially comparing it to the old ALIX.2D3 devices that were bulletproof by comparison. I’m not sure if that’s just the nature of these lower-cost devices, but I can’t imagine anyone depending on it for business use. I’ve had to reflash it multiple times over the years. If it’s ever unplugged without doing a proper Halt System, or if it’s not connected to a UPS, it almost never boots back up on its own.
This time, the issue started when the UPS batteries died and the power went out. When power was restored, only the power light came on—it wouldn’t fully boot. It displayed the pfSense logo during startup but then threw several errors and failed to complete the boot process.
-
It does look like it might be an eMMC issue yes.
You can now install to USB though as a workaround.
-
Thanks for the information. The installer USB only seems to work through the USB 2.0 port, so would I just get a separate USB key to use in the USB 3.0 port to install to?
Along the same lines, will a USB 3.0 key work, or should I stick with 2.0?
And is 8GB still the minimum storage size required to install?
-
The installer should work on either port but some USB memsticks will only work in one or the other. The uboot USB stack doesn't seem to handle fallback very well.
Yes, using a USB3 stick as the target device should be better in terms of boot time. In reality it doesn't make much difference in my experience. Other than at boot.
-
@stephenw10 Thanks for your help. I got another USB key and put in the USB 3.0 slot to install the operating system, but it seems to fail with 'Invalid Partition 2':
Hit any key to stop autoboot: 0 Marvell>> usb reset resetting USB... USB0: Register 2000104 NbrPorts 2 Starting the controller USB XHCI 1.00 USB1: USB EHCI 1.00 scanning bus 0 for devices... 2 USB Device(s) found scanning bus 1 for devices... 2 USB Device(s) found scanning usb for storage devices... 2 Storage Device(s) found Marvell>> run usbrecovery switch to partitions #0, OK mmc1(part 0) is current device MMC erase: dev # 1, block # 0, count 4194304 ... 4194304 blocks erased: OK resetting USB... USB0: Register 2000104 NbrPorts 2 Starting the controller USB XHCI 1.00 USB1: USB EHCI 1.00 scanning bus 0 for devices... 2 USB Device(s) found scanning bus 1 for devices... EHCI timed out on TD - token=0x80008d80 USB device not accepting new address (error=22) 1 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found ** Invalid partition 2 **It's a new flash drive that I haven't ever put data on, and after it failed I did try deleting the partitions and recreating, but I'm not sure if any specific prep is required on the flash drive?
Do you have any suggestions how to proceed beyond this?
-
Yes it's probably trying to boot from empty drive. Try swapping the drives for the install.
Alternatively you can set a boot env to boot from the other device or manually set it at the uboot prompt.
-
@stephenw10 This is the output when I switch the flash drives around. I should mention that previously I couldn't get the pfSense recovery flash drive to boot off USB 3.0 so I had to move it to USB 2.0.
Hit any key to stop autoboot: 0 Marvell>> usb reset resetting USB... USB0: Register 2000104 NbrPorts 2 Starting the controller USB XHCI 1.00 USB1: USB EHCI 1.00 scanning bus 0 for devices... usb_new_device: Cannot read configuration, skipping device 13fe:5100 1 USB Device(s) found scanning bus 1 for devices... 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found Marvell>> run usbrecovery switch to partitions #0, OK mmc1(part 0) is current device MMC erase: dev # 1, block # 0, count 4194304 ... 4194304 blocks erased: OK resetting USB... USB0: Register 2000104 NbrPorts 2 Starting the controller USB XHCI 1.00 USB1: USB EHCI 1.00 scanning bus 0 for devices... usb_new_device: Cannot read configuration, skipping device 13fe:5100 1 USB Device(s) found scanning bus 1 for devices... 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found ** Invalid partition 2 **Can you elaborate on what the alternative options are? I wasn't sure how to set the boot env to boot the alternate or manually set it at the uboot prompt.
Thanks in advance, I really appreciate the help!
-
Hmm, I would try a different USB stick.
Also be sure to completely power cycle the 1100 between attempts to reset the USB bus devices.
Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.