25.11: Fatal trap 12 on reboot
-
@stephenw10
I’ve uploaded dumps from the primary firewall (primary.zip). I’ll check tomorrow whether the secondary firewall crashes as well. -
Thanks.
That's interesting. It looks like a different bug to me. Those are almost identical backtraces in the IPv6 stack. We are looking at it....
-
@stephenw10
Uploaded secondary.zip, these look similar to me.
A bit off-topic.
Please note that both during system startup and when enabling CARP maintenance mode, there is a flood of CARP events. After the initial VIP reconfiguration at boot, it sometimes fails to complete (on the primary, almost consistently—likely due to higher latency). When PPPoE comes up, the configuration process starts over, even though PPPoE has no VIPs configured, and then it stops with nothing configured on LAN and I need to disable/enable CARP to make work it again. Is this the intended behavior? I understand this may be a separate issue and this is not related to 25.11, but it should be evident in the dumps. -
Yup this new panic you;re seeing is specific to the debug kernel. We are fixing that so we will then be able to see the reboot issue.
-
@stephenw10
I am very grateful for your help and support! -
No worries. I'm happy you're able to test an early dev snaphot. Finding these issues earlier makes it much easier for us.
-
Ok are you able to try a custom debug kernel here?
https://nc.netgate.com/nextcloud/s/Rj5F5K2qb4ps72R
If so rename the /boot/kernel folder to a backup then extract that .tgz into /boot and reboot into the new kernel.
-
@stephenw10 said in 25.11: Fatal trap 12 on reboot:
rename the /boot/kernel folder
You mean /boot/kernel.debug?
-
No I mean the kernel folder in boot. That tgz contains a complete replacement for that with the new debug kernel and all the modules for it.
-
So for example, assuming you uploaded the file via the GUI:
[25.11-DEVELOPMENT][admin@4860.stevew.lan]/root: mv /tmp/kernel_nd6_ifa_alloc.tgz /boot [25.11-DEVELOPMENT][admin@4860.stevew.lan]/root: mv /boot/kernel /boot/kernel_old [25.11-DEVELOPMENT][admin@4860.stevew.lan]/root: tar -xzf /boot/ker [25.11-DEVELOPMENT][admin@4860.stevew.lan]/root: cd /boot [25.11-DEVELOPMENT][admin@4860.stevew.lan]/boot: tar -xzf /boot/kernel_nd6_ifa_alloc.tgzThen reboot and you should have:
[25.11-DEVELOPMENT][admin@4860.stevew.lan]/root: uname -a FreeBSD 4860.stevew.lan 15.0-PRERELEASE FreeBSD 15.0-PRERELEASE #0 mjg-nd6-ifa_alloc-n256484-038e2217543a: Mon Sep 29 15:06:18 UTC 2025 root@pfsense-build-01.netgate.com:/usr/obj/usr/home/mjg/repos/FreeBSD-src/amd64.amd64/sys/pfSense-DEBUG amd64 -
Uploaded primary29.zip
-
Nice! That looks like something we can work with. Thanks!
-
@stephenw10
Just for your information, the secondary firewall has exactly the same dump, and that’s good, I suppose. -
Yes it's exactly what you want to see in a crash report. If you get one.
Here is a test kernel that should have that fixed. Same procedure as before;
-
So far, so good, no crashes, thanks.
-
@stephenw10
I’ve opened another thread about the Virtual IP (VIP) issue I mentioned earlier.
https://forum.netgate.com/topic/198976/incomplete-vip-configuration-on-boot-causing-carp-failure-since-25.07-beta
