netgate-installer.iso.gz has no ISO file - only folder
-
Nevermind, I futzed around until I found Trend Micro Unarchiver One on my box and it extracted the net installer ISO. I will write it to a DVD and try it.
-
Well booting from the DVD gives me a screenful of "vm_fault: pager read error, pid 1 (init)" and nothing else.
-
From 2.7.1 run
certctl rehashthen check for upgrades again.Are you actually booting a real DVD? Does the DVD drive work reliably? They are pretty much all ancient and full of dust at this point. Can you not boot from USB?
But you should be able to upgrade from 2.7.1.
-
@stephenw10 said in netgate-installer.iso.gz has no ISO file - only folder:
actually booting a real DVD? Does the DVD drive work reliably? They are pretty much all ancient and full of dust at this point.
-
What happens if I want to use the ISO in GNS3 for network experiments, and not in a VM?
I just need the pfsense amd64.ISO. I don't want to install it in a full VM. -
You want to boot and run it 'live' from the ISO? Waaay back in the day I think pfSense supported that. m0n0wall did, with config on a floppy disk! But that hasn't been an option for many years.
-
@stephenw10 Yes the DVD (actually BD) drive works great. I eventually found a 2.7.2 ISO in my files and wrote it to a blank and it installed perfectly, then updated to 2.8.1 trouble free. No net install rigmarole needed.
The box in question is a 2012 model mac mini. It probably could boot from a flash disk, but I have mountains of blank DVDs sourced from Goodwill on hand, while I have had limited luck writing ISOs to flash disks. And writing an image of 900 megs or so onto a flash disk seems wasteful to me compared to a blank DVD. That wastes DVD space too of course, but I paid almost nothing for the blanks. I got them from a store called a Goodwill outlet where they sell stuff by the pound vice normal Goodwill stores where each item has a price sticker.
-
Hmm, well the Net Installer ISO is still a valid ISO. It should boot. Do you have any additional output from the failure?
-
@stephenw10 said in netgate-installer.iso.gz has no ISO file - only folder:
Hmm, well the Net Installer ISO is still a valid ISO. It should boot. Do you have any additional output from the failure?
The DVD booted the system and it got as far as the pfSense text menu before spazzing out with the error I described previously scrolling endlessly on the screen. I have a 2014 model mac mini sourced from ebay on the way to replace the 2012 model so I might try booting the net install DVD on it before using the 2.7.2 DVD to install.
Mac minis really work well for pfSense since they are small, completely silent, and don't use much juice. A dual core 4th gen i7 with 8 gigs memory and 256 gig SSD built in that cost two digit $ on ebay should fill the bill well. I am getting hardware ready for Google Fiber that should be turned on in my area soon so a 2014 model with Thunderbolt 2's 20 gigabit throughput should work better than 10 gigabit Thunderbolt 1 for running a 10 gigabit ethernet card.
-
I had to do a new 2.8.0 USB on a new mini-pc the other day, and found issues doing it with Rufus (which has been my goto app for years).
Same USB & ISO file worked fine using Balena Etcher so nothing wrong with the download or USB ??
-
Mmm, Etcher is the only way to go IMO! At least until someone does something better. It was a game-changer for us in support when they released it. I have seen Rufus do weird things numerous times. Mostly when it tries to create a multiboot drive with several ISO images. I've yet to see Etcher fail in any OS given a valid image.
