pfSense VM on Proxmox: PPPoE only works when parent NIC is PCI passthrough — virtual NIC breaks LAN→WAN traffic

netblues

@w0w

Yes he has.
I'm facing exactly the same under kvm

kvm issue

w0w

Quick assisted search...

September 2025 — checksum offload rework
Commit 1c23d8f9f398 updates vtnet checksum-offload flag handling for TX/RX and adds new RX checksum statistics.
Late August–September — rxcsum fixes
Patch series around commit 03da4395… (Bug 263229) fixes vtnet RX checksum validation issues.
October 2025 — hardware TCP LRO disabled by default
Commits 3d548504c705 (stable/14) and e1a7840dd941 (stable/15):
hardware TCP LRO is now disabled by default for vtnet.
Active bug reports related to vtnet + checksum offload

Bug 277718

Bug 259249

Bug 276760

Bug 235607

Should be something related to the new checksum implementation?

netblues

@w0w This goes too deep.

If you add another vm on proxmox and use the bridged lan as a gateway, it will also work.

Apart from ppp, the issue also occurs on openvpn client related traffic, but only when using dco offload.

So its not only pppoe related.

w0w

@netblues
Did you file this issue on Redmine already?

netblues

@w0w No, I havent.

Steven said would try to replicate the issue localy.

Perhaps a redmine is now appropriate.

stephenw10

Mmm, your report was only for policy routed traffic. Given this new data that could just be your setup though.

@w0w You say clients can ping DNS servers, is that locally or over the PPPoE?

This feels like it might be an MTU/MSS issue if the virtual NIC is reporting the wrong value somehow.

netblues

@stephenw10
As the op says, it only happens on latest beta, which is also the case in what I see.
And looking at interface status everything mtu related looks fine my side too.

w0w

@stephenw10 said in pfSense VM on Proxmox: PPPoE only works when parent NIC is PCI passthrough — virtual NIC breaks LAN→WAN traffic:

You say clients can ping DNS servers, is that locally or over the PPPoE?

8.8.8.8

@stephenw10 said in pfSense VM on Proxmox: PPPoE only works when parent NIC is PCI passthrough — virtual NIC breaks LAN→WAN traffic:

This feels like it might be an MTU/MSS issue if the virtual NIC is reporting the wrong value somehow.

I have been played with the MTU/MSS values without any luck.

I also tried almost all sysctl hw.vtnet settings

hw.vtnet.altq_disable: 1
hw.vtnet.lro_mbufq_depth: 0
hw.vtnet.lro_entry_count: 128
hw.vtnet.rx_process_limit: 1024
hw.vtnet.tso_maxlen: 65535
hw.vtnet.mq_max_pairs: 32
hw.vtnet.mq_disable: 0
hw.vtnet.lro_disable: 1
hw.vtnet.tso_disable: 1
hw.vtnet.fixup_needs_csum: 0
hw.vtnet.csum_disable: 1

What I did not try are those tunables... this will be next

dev.vtnet.X.rxcsum=0
dev.vtnet.X.txcsum=0
dev.vtnet.X.tso=0

w0w

said in pfSense VM on Proxmox: PPPoE only works when parent NIC is PCI passthrough — virtual NIC breaks LAN→WAN traffic:

dev.vtnet.X.rxcsum=0
dev.vtnet.X.txcsum=0
dev.vtnet.X.tso=0

Failed also.

marcosm

Would you share the content/output of the following when it's working and when it's not?

Generated OpenVPN config, e.g.: /var/etc/openvpn/server1/config.ovpn
Filter rules: pfctl -a '*' -se; pfctl -a '*' -sn; pfctl -a '*' -sr

You can upload it here:
https://nc.netgate.com/nextcloud/s/8CQAsHwwooTRAPt

netblues

@marcosm Since I'm the only one reporting the issue with openvpn,
I have uploaded the requested info.

However, testing further reveals that dco enabled client connection doesn't work only if the vpn is established over pppoe internet connection.

if the dco enabled openvp connection uses dhcp wan, then openvpn works fine.

So, opevpn client without dco works over pppoe connection from a non virtual pc, while at the same time , the same pc can only ping anything on the Internet but fails on anything else.