İnternet kesintisi



  • Merhaba arkadaşlar sürekli olmak şartı ile ara ara internet kesiliyor. Bunu sebebi ne olabilir. ADSL hattında bir problem yoktur. Daha önce böyle birşey yoktu. Pfsense makinamı yeniledim. Yeni makinaya pfsense kurdum. Ondan sonra ara ara internet kesilip geri gelmeye başladı.



  • @Seyfullah:

    Merhaba arkadaşlar sürekli olmak şartı ile ara ara internet kesiliyor. Bunu sebebi ne olabilir. ADSL hattında bir problem yoktur. Daha önce böyle birşey yoktu. Pfsense makinamı yeniledim. Yeni makinaya pfsense kurdum. Ondan sonra ara ara internet kesilip geri gelmeye başladı.

    merhaba

    burda dikkat edilmesi bir kac husus var pfsense üzerinde hangi paketler kurulu artı ethernet kartların uyumluluğu çok önemli bridge kullanılıyormu kurmuş olduğun sistemin donanim özellikleri nedir?



  • Dashboard ,Lightsquid, imspector, squid, squidGuard  paketler kurulu ethernet kartların ise ASUS marka NX1101 marka ikiside
    İşlemci :1,8 çift çekirdedek
    Ram:3 gb 667 mhz
    Harddisk :160 GB
    Bana şu şekilde hata mesajı veriyor.
    stge1:Link states coalesced diye hata veriyor.Bu stge1 içeriye ip dağıta ethernet kartım.



  • mrb konsoldan dmesg komutunu çalıştırıp orda ethernet kartlarında up down durumu olmuşmu onu kontrol edermisin



  • aşağıdaki gibi bir bilgi verdi dmesg komutunun çıktısıdır. Onormal bir durum var mı acaba

    Copyright © 1992-2009 The FreeBSD Project.
    Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
           The Regents of the University of California. All rights reserved.
    FreeBSD is a registered trademark of The FreeBSD Foundation.
    FreeBSD 7.2-RELEASE-p5 #0: Sun Dec  6 23:20:31 EST 2009
       sullrich@FreeBSD_7.2_pfSense_1.2.3_snaps.pfsense.org:/usr/obj.pfSense/usr/pfSensesrc/src/sys/pfSense_SMP.7
    Timecounter "i8254" frequency 1193182 Hz quality 0
    CPU: Intel(R) Pentium(R) Dual  CPU  E2160  @ 1.80GHz (1795.51-MHz 686-class CPU)
     Origin = "GenuineIntel"  Id = 0x6fd  Stepping = 13
     Features=0xbfebfbff <fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>Features2=0xe39d <sse3,dtes64,mon,ds_cpl,est,tm2,ssse3,cx16,xtpr,pdcm>AMD Features=0x20100000 <nx,lm>AMD Features2=0x1 <lahf>Cores per package: 2
    real memory  = 3211657216 (3062 MB)
    avail memory = 3137036288 (2991 MB)
    ACPI APIC Table: <casper era="">FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
    cpu0 (BSP): APIC ID:  0
    cpu1 (AP): APIC ID:  1
    ioapic0: Changing APIC ID to 4
    ioapic0 <version 2.0="">irqs 0-23 on motherboard
    wlan: mac acl policy registered
    kbd1 at kbdmux0
    cryptosoft0: <software crypto="">on motherboard
    padlock0: No ACE support.
    acpi0: <casper era="">on motherboard
    acpi0: [ITHREAD]
    acpi0: Power Button (fixed)
    acpi0: reservation of 0, a0000 (3) failed
    acpi0: reservation of 100000, bf5e0000 (3) failed
    Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
    acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
    acpi_hpet0: <high precision="" event="" timer="">iomem 0xfed00000-0xfed003ff on acpi0
    device_attach: acpi_hpet0 attach returned 12
    acpi_button0: <power button="">on acpi0
    pcib0: <acpi host-pci="" bridge="">port 0xcf8-0xcff on acpi0
    pci0: <acpi pci="" bus="">on pcib0
    pcib1: <pci-pci bridge="">irq 16 at device 1.0 on pci0
    pci1: <pci bus="">on pcib1
    vgapci0: <vga-compatible display="">port 0xff00-0xff07 mem 0xfde00000-0xfdefffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0
    agp0: <intel 946gz="" svga="" controller="">on vgapci0
    agp0: detected 7676k stolen memory
    agp0: aperture size is 256M
    pci0: <multimedia, hda="">at device 27.0 (no driver attached)
    uhci0: <uhci (generic)="" usb="" controller="">port 0xfe00-0xfe1f irq 23 at device 29.0 on pci0
    uhci0: [GIANT-LOCKED]
    uhci0: [ITHREAD]
    usb0: <uhci (generic)="" usb="" controller="">on uhci0
    usb0: USB revision 1.0
    uhub0: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usb0
    uhub0: 2 ports with 2 removable, self powered
    uhci1: <uhci (generic)="" usb="" controller="">port 0xfd00-0xfd1f irq 19 at device 29.1 on pci0
    uhci1: [GIANT-LOCKED]
    uhci1: [ITHREAD]
    usb1: <uhci (generic)="" usb="" controller="">on uhci1
    usb1: USB revision 1.0
    uhub1: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usb1
    uhub1: 2 ports with 2 removable, self powered
    uhci2: <uhci (generic)="" usb="" controller="">port 0xfc00-0xfc1f irq 18 at device 29.2 on pci0
    uhci2: [GIANT-LOCKED]
    uhci2: [ITHREAD]
    usb2: <uhci (generic)="" usb="" controller="">on uhci2
    usb2: USB revision 1.0
    uhub2: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usb2
    uhub2: 2 ports with 2 removable, self powered
    uhci3: <uhci (generic)="" usb="" controller="">port 0xfb00-0xfb1f irq 16 at device 29.3 on pci0
    uhci3: [GIANT-LOCKED]
    uhci3: [ITHREAD]
    usb3: <uhci (generic)="" usb="" controller="">on uhci3
    usb3: USB revision 1.0
    uhub3: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usb3
    uhub3: 2 ports with 2 removable, self powered
    ehci0: <intel 82801gb="" r="" (ich7)="" usb="" 2.0="" controller="">mem 0xfdfff000-0xfdfff3ff irq 23 at device 29.7 on pci0
    ehci0: [GIANT-LOCKED]
    ehci0: [ITHREAD]
    usb4: EHCI version 1.0
    usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
    usb4: <intel 82801gb="" r="" (ich7)="" usb="" 2.0="" controller="">on ehci0
    usb4: USB revision 2.0
    uhub4: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usb4
    uhub4: 8 ports with 8 removable, self powered
    umass0: <vendor 0="" 2="" 0x05e3="" usb="" storage,="" class="" 0,="" rev="" 2.00="" 96.02,="" addr="">on uhub4
    pcib2: <acpi pci-pci="" bridge="">at device 30.0 on pci0
    pci2: <acpi pci="" bus="">on pcib2
    stge0: <sundance st-1023="" gigabit="" ethernet="">port 0xee00-0xeeff mem 0xfdbff000-0xfdbff0ff irq 18 at device 1.0 on pci2
    miibus0: <mii bus="">on stge0
    ip1000phy0: <ic 10="" 100="" 1000="" plus="" media="" interface="">PHY 24 on miibus0
    ip1000phy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
    stge0: Ethernet address: 00:22:15:10:d9:e3
    stge0: [ITHREAD]
    stge1: <sundance st-1023="" gigabit="" ethernet="">port 0xec00-0xecff mem 0xfdbfe000-0xfdbfe0ff irq 17 at device 2.0 on pci2
    miibus1: <mii bus="">on stge1
    ip1000phy1: <ic 10="" 100="" 1000="" plus="" media="" interface="">PHY 24 on miibus1
    ip1000phy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
    stge1: Ethernet address: 00:22:15:10:d9:e9
    stge1: [ITHREAD]
    skc0: <marvell gigabit="" ethernet="">port 0xea00-0xeaff mem 0xfdbf8000-0xfdbfbfff irq 16 at device 3.0 on pci2
    skc0: Marvell Yukon Lite Gigabit Ethernet rev. (0x9)
    sk0: <marvell semiconductor,="" inc.="" yukon="">on skc0
    sk0: Ethernet address: 00:15:58:62:65:34
    miibus2: <mii bus="">on sk0
    e1000phy0: <marvell 88e1011="" gigabit="" phy="">PHY 0 on miibus2
    e1000phy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
    skc0: [ITHREAD]
    isab0: <pci-isa bridge="">at device 31.0 on pci0
    isa0: <isa bus="">on isab0
    atapci0: <intel ich7="" udma100="" controller="">port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfa00-0xfa0f at device 31.1 on pci0
    ata0: <ata 0="" channel="">on atapci0
    ata0: [ITHREAD]
    atapci1: <intel ich7="" sata300="" controller="">port 0xf900-0xf907,0xf800-0xf803,0xf700-0xf707,0xf600-0xf603,0xf500-0xf50f irq 19 at device 31.2 on pci0
    atapci1: [ITHREAD]
    ata2: <ata 0="" channel="">on atapci1
    ata2: [ITHREAD]
    ata3: <ata 1="" channel="">on atapci1
    ata3: [ITHREAD]
    pci0: <serial bus,="" smbus="">at device 31.3 (no driver attached)
    acpi_tz0: <thermal zone="">on acpi0
    speaker0: <pc speaker="">port 0x61 on acpi0
    fdc0: <floppy drive="" controller="">port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
    fdc0: [FILTER]
    sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
    sio0: type 16550A
    sio0: [FILTER]
    sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
    sio1: type 16550A
    sio1: [FILTER]
    atkbdc0: <keyboard controller="" (i8042)="">port 0x60,0x64 irq 1 on acpi0
    atkbd0: <at keyboard="">irq 1 on atkbdc0
    kbd0 at atkbd0
    atkbd0: [GIANT-LOCKED]
    atkbd0: [ITHREAD]
    cpu0: <acpi cpu="">on acpi0
    est0: <enhanced speedstep="" frequency="" control="">on cpu0
    est: CPU supports Enhanced Speedstep, but is not recognized.
    est: cpu_vendor GenuineIntel, msr 928092806000928
    device_attach: est0 attach returned 6
    p4tcc0: <cpu frequency="" thermal="" control="">on cpu0
    cpu1: <acpi cpu="">on acpi0
    est1: <enhanced speedstep="" frequency="" control="">on cpu1
    est: CPU supports Enhanced Speedstep, but is not recognized.
    est: cpu_vendor GenuineIntel, msr 928092806000928
    device_attach: est1 attach returned 6
    p4tcc1: <cpu frequency="" thermal="" control="">on cpu1
    acpi_hpet0: <high precision="" event="" timer="">iomem 0xfed00000-0xfed003ff on acpi0
    device_attach: acpi_hpet0 attach returned 12
    pmtimer0 on isa0
    orm0: <isa option="" roms="">at iomem 0xc0000-0xcafff,0xcc000-0xcd7ff,0xef000-0xeffff pnpid ORM0000 on isa0
    sc0: <system console="">at flags 0x100 on isa0
    sc0: VGA <16 virtual consoles, flags=0x300>
    vga0: <generic isa="" vga="">at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
    Timecounters tick every 1.000 msec
    IPsec: Initialized Security Association Processing.
    acd0: CDRW <lite-on dvd="" c="" lh52c1p="" 6l14="">at ata0-master UDMA40
    ad4: 152627MB <seagate st3160215as="" 3.aac="">at ata2-master SATA150
    (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
    (probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
    (probe0:umass-sim0:0:0:0): SCSI Status: Check Condition
    (probe0:umass-sim0:0:0:0): NOT READY asc:3a,0
    (probe0:umass-sim0:0:0:0): Medium not present
    (probe0:umass-sim0:0:0:0): Unretryable error
    (probe0:umass-sim0:0:0:1): TEST UNIT READY. CDB: 0 20 0 0 0 0
    (probe0:umass-sim0:0:0:1): CAM Status: SCSI Status Error
    (probe0:umass-sim0:0:0:1): SCSI Status: Check Condition
    (probe0:umass-sim0:0:0:1): NOT READY asc:3a,0
    (probe0:umass-sim0:0:0:1): Medium not present
    (probe0:umass-sim0:0:0:1): Unretryable error
    (probe0:umass-sim0:0:0:2): TEST UNIT READY. CDB: 0 40 0 0 0 0
    (probe0:umass-sim0:0:0:2): CAM Status: SCSI Status Error
    (probe0:umass-sim0:0:0:2): SCSI Status: Check Condition
    (probe0:umass-sim0:0:0:2): NOT READY asc:3a,0
    (probe0:umass-sim0:0:0:2): Medium not present
    (probe0:umass-sim0:0:0:2): Unretryable error
    (probe0:umass-sim0:0:0:3): TEST UNIT READY. CDB: 0 60 0 0 0 0
    (probe0:umass-sim0:0:0:3): CAM Status: SCSI Status Error
    (probe0:umass-sim0:0:0:3): SCSI Status: Check Condition
    (probe0:umass-sim0:0:0:3): NOT READY asc:3a,0
    (probe0:umass-sim0:0:0:3): Medium not present
    (probe0:umass-sim0:0:0:3): Unretryable error
    SMP: AP CPU #1 Launched!
    da0 at umass-sim0 bus 0 target 0 lun 0
    da0: <generic 9602="" storage="" device="">Removable Direct Access SCSI-0 device
    da0: 40.000MB/s transfers
    da0: Attempt to query device size failed: NOT READY, Medium not present
    da1 at umass-sim0 bus 0 target 0 lun 1
    da1: <generic 9602="" storage="" device="">Removable Direct Access SCSI-0 device
    da1: 40.000MB/s transfers
    da1: Attempt to query device size failed: NOT READY, Medium not present
    da2 at umass-sim0 bus 0 target 0 lun 2
    da2: <generic 9602="" storage="" device="">Removable Direct Access SCSI-0 device
    da2: 40.000MB/s transfers
    da2: Attempt to query device size failed: NOT READY, Medium not present
    da3 at umass-sim0 bus 0 target 0 lun 3
    da3: <generic 9602="" storage="" device="">Removable Direct Access SCSI-0 device
    da3: 40.000MB/s transfers
    da3: Attempt to query device size failed: NOT READY, Medium not present
    Trying to mount root from ufs:/dev/ad4s1a
    pflog0: promiscuous mode enabled
    stge0: link state changed to UP
    stge1: link state changed to DOWN
    stge1: link state changed to UP
    stge1: link state changed to DOWN
    stge1: link state changed to UP
    stge0: link state changed to DOWN
    stge0: link state changed to UP
    stge0: link state changed to DOWN
    stge0: link state changed to UP
    stge0: link state changed to DOWN
    stge0: link state changed to UP
    stge0: link state changed to DOWN
    stge0: link state changed to UP
    stge0: link state changed to DOWN
    stge0: link state changed to UP
    stge0: link state changed to DOWN
    stge0: link state changed to UP
    stge0: link state changed to DOWN
    stge0: link state changed to UP
    stge0: link state changed to DOWN
    stge0: link state changed to UP
    stge0: link state changed to DOWN
    stge0: link state changed to UP</generic></generic></generic></generic></seagate></lite-on></generic></system></isa></high></cpu></enhanced></acpi></cpu></enhanced></acpi></at></keyboard></floppy></pc></thermal></serial></ata></ata></intel></ata></intel></isa></pci-isa></marvell></mii></marvell></marvell></ic></mii></sundance></ic></mii></sundance></acpi></acpi></vendor></intel></intel></intel></intel></uhci></uhci></intel></uhci></uhci></intel></uhci></uhci></intel></uhci></uhci></multimedia,></intel></vga-compatible></pci></pci-pci></acpi></acpi></power></high></casper></software></version></casper></lahf></nx,lm></sse3,dtes64,mon,ds_cpl,est,tm2,ssse3,cx16,xtpr,pdcm></fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>



  • steg0 ethernetin up - down oldugunu enalt satırda görüyorsun bu ethernetin arızalı yada o bacak tarafındaki aygınla ilgili baglantısında sorun var sanırım sizin sorun bundan kaynaklanıyor



  • Veri alışveri olduğuna dair ışığı yanıyor. Bir sıkıntı olmuş olsa geçicide olsa internete çıkarmaması lazım değil mi acaba. Yuvalarına da takılı cihazlar daha 3-4 aylık yeni yani.Makina değişimi olduktan sonra bunlar oldu. Bilmiyorum acaba pfsense makinamda ayarlardan dolayı bir sıkıntı olabilirmi ? Fabrika ayarlarına dönsem düzelirmi.



  • eğer imkanın varsa ethernet kartlarını değiştirip denemeni öneririm, özellikle steg0 interface i için…



  • ethernet kartlarını değiştirdim. Hatta makinayı bile değiştirdim. Ama sıkıntı hala devam ediyor. Anlamadığımız birşey var ama çözemedim.

    (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
    (probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
    (probe0:umass-sim0:0:0:0): SCSI Status: Check Condition
    (probe0:umass-sim0:0:0:0): NOT READY asc:3a,0
    (probe0:umass-sim0:0:0:0): Medium not present
    (probe0:umass-sim0:0:0:0): Unretryable error
    (probe0:umass-sim0:0:0:1): TEST UNIT READY. CDB: 0 20 0 0 0 0
    (probe0:umass-sim0:0:0:1): CAM Status: SCSI Status Error
    (probe0:umass-sim0:0:0:1): SCSI Status: Check Condition
    (probe0:umass-sim0:0:0:1): NOT READY asc:3a,0
    (probe0:umass-sim0:0:0:1): Medium not present
    (probe0:umass-sim0:0:0:1): Unretryable error
    (probe0:umass-sim0:0:0:2): TEST UNIT READY. CDB: 0 40 0 0 0 0
    (probe0:umass-sim0:0:0:2): CAM Status: SCSI Status Error
    (probe0:umass-sim0:0:0:2): SCSI Status: Check Condition
    (probe0:umass-sim0:0:0:2): NOT READY asc:3a,0
    (probe0:umass-sim0:0:0:2): Medium not present
    (probe0:umass-sim0:0:0:2): Unretryable error
    (probe0:umass-sim0:0:0:3): TEST UNIT READY. CDB: 0 60 0 0 0 0
    (probe0:umass-sim0:0:0:3): CAM Status: SCSI Status Error
    (probe0:umass-sim0:0:0:3): SCSI Status: Check Condition
    (probe0:umass-sim0:0:0:3): NOT READY asc:3a,0
    (probe0:umass-sim0:0:0:3): Medium not present
    (probe0:umass-sim0:0:0:3): Unretryable error



  • saçma geliyor ama aradaki ethernet kablolarını da bir değiştirip dener misin?



  • @Onur:

    saçma geliyor ama aradaki ethernet kablolarını da bir değiştirip dener misin?

    RJ45 lerde temasızlık vardır.


Locked