Keep loosing WAN IP Address - dhclient does not seem to do update

Selective

as i said, happens one time after reboot, then press renew and the issue disappears,
there is something magic about the renew button that doesn´t happen in the reboot process =)

sullrich

I have rebooted countless times and cannot reproduce this. Sorry.

ThomasF

I don't think I am affected by that bug, It's much worse for me :(
After about 12h uptime (this time) the interface went down, when i renewed the ip adress nothing worked correctly, I could not do nslookup. Didnt try anything else. I restarted the DNS forwarder, it made no difference. I'm not sure about this but my hardware could be very incompatible with pfsense 1.0.2/fbsd 5.2.

Feb 27 08:43:36 kernel: arplookup 66.249.93.99 failed: could not allocate llinfo
Feb 27 08:43:36 kernel: arpresolve: can't allocate route for 66.249.93.99

Just wanted to say this, I don't have time to look further into this at the moment.

EDIT: SNAPSHOT-02-27-2007 solved my problems

sullrich

@ThomasF:

I don't think I am affected by that bug, It's much worse for me :(
After about 12h uptime (this time) the ip adress went down, when i renewed it nothing worked correctly, I could not do nslookup. Didnt try anything else. I restarted the DNS forwarder, it made no difference. I'm not sure about this but my hardware could be very incompatible with pfsense 1.0.2/fbsd 5.2.

Feb 27 08:43:36 kernel: arplookup 66.249.93.99 failed: could not allocate llinfo
Feb 27 08:43:36 kernel: arpresolve: can't allocate route for 66.249.93.99

This is not the same problem. Please start a new thread. And for the record, we do not use FreeBSD 5.2.

hoba

@ThomasF:

Feb 27 08:43:36 kernel: arplookup 66.249.93.99 failed: could not allocate llinfo
Feb 27 08:43:36 kernel: arpresolve: can't allocate route for 66.249.93.99

Any possibility that you try to run PPPoE along with Multiwan like in the following thread?
http://forum.pfsense.org/index.php/topic,3554.0.html

If this is true please add your comments to this thread. If not please start a new one like Scott asked you to do.

Selective

i don´t know what you guys are using when you are testing the dhclient, but issue still exists:

Mar 1 17:38:47 dhclient[322]: exiting.
Mar 1 17:38:47 dhclient[322]: exiting.
Mar 1 17:38:47 dhclient[322]: short write: wanted 21 got 0 bytes
Mar 1 17:38:47 dhclient[322]: short write: wanted 21 got 0 bytes
Mar 1 17:38:47 dhclient[322]: DHCPACK from 90.224.168.1
Mar 1 17:38:47 dhclient[322]: DHCPREQUEST on rl0 to 255.255.255.255 port 67
Mar 1 17:36:26 last message repeated 3 times
Mar 1 17:32:37 last message repeated 6 times
Mar 1 17:30:36 last message repeated 3 times

sullrich

We lowered the lease time to 150 and used a dedicated testing box.

At this point we cannot reproduce the error. Reinstall.

Selective

i have done so 2 times already =)

sullrich

Well sorry, 4 developers where able to reproduce it prior but under no conditions does it break now.

I don't know what to tell you at this point.

Selective

oh well, i just lay low for a while, and see if others having problems too,

thanks for all your hard work !

Krakke

1.0.1-SNAPSHOT-02-21-2007

Uptime 3 days, 16:21

Still running :)

sullrich

@Krakke:

1.0.1-SNAPSHOT-02-21-2007

Uptime 3 days, 16:21

Still running :)

Great! Please continue to let us know the progress. We really think its nailed.

Krakke

@sullrich:

@Krakke:

1.0.1-SNAPSHOT-02-21-2007

Uptime 3 days, 16:21

Still running :)

Great! Please continue to let us know the progress. We really think its nailed.

Still working, updated to 1.0.1-SNAPSHOT-02-27-2007

ThomasF

It seems to be working just fine now, thanks!

freax

I've done a clean install with the latest official update from 08/03/2007 but my logs registeres the following rc.linkup message:

Last 50 system log entries
Mar 9 18:13:30 php: : Incorrect number of arguments passed rc.linkup…exiting.
Mar 9 18:13:30 php: : Arguments passed rc.linkup. ''
Mar 9 18:13:28 check_reload_status: rc.linkup starting
Mar 9 18:13:23 php: : phpDynDNS: No Change In My IP Address and/or 25 Days Has Not Past. Not Updating Dynamic DNS Entry.

It's normal ?

[]'s

sullrich

Yes, those are debugging statements and looks fine.

Krakke

1.0.1-SNAPSHOT-02-27-2007
Uptime 7 days, 16:51

Still running, updating to pfSense-Full-Update-1.0.1-SNAPSHOT-03-08-2007

sullrich

@Krakke:

1.0.1-SNAPSHOT-02-27-2007
Uptime 7 days, 16:51

Still running, updating to pfSense-Full-Update-1.0.1-SNAPSHOT-03-08-2007

Great! Thanks for the update.

Veni

Don't know if this is the same issue, but i noticed this yesterday.
Running 1.0.1-SNAPSHOT-03-18-2007 built on Thu Mar 8 22:14:44 EST 2007.

For some unknown reason, my pfSense box lost it's WAN dhcp ipaddress, but my
WatchGuard box connected to the same ISP outlet(i use a switch to get several ports)
did not have any problems recorded, and it to runs on a WAN dhcp. The WatchGuard box
uses something called udhcpc. I don't know if it's better, worse or the same as dhclient.

Pressing the Renew button in Status–>Interfaces had no problem of getting a ipaddress.
I pressed the button around 20:15.

Got this from the syslog(if was not at home when this happened):

| Mar 12 17:35:24 dhclient[261]: DHCPREQUEST on xl1 to 81.228.3.186 port 67 |
| Mar 12 17:41:13 last message repeated 3 times |
| Mar 12 17:44:02 dhclient[261]: DHCPDISCOVER on xl1 to 255.255.255.255 port 67 interval 6 |
| Mar 12 17:44:02 dhclient[261]: DHCPOFFER from 81.236.128.1 |
| Mar 12 17:44:04 dhclient[261]: DHCPREQUEST on xl1 to 255.255.255.255 port 67 |
| Mar 12 17:44:04 dhclient[261]: DHCPACK from 81.236.128.1 |
| Mar 12 17:44:04 dhclient[261]: bound to 81.236.134.30 – renewal in 600 seconds. |
| Mar 12 17:44:34 SnortStartup[55432]: Ram free BEFORE starting Snort: 108M – Ram free AFTER starting Snort: 107M -- Mode ac-sparsebands -- Snort memory usage: |
| Mar 12 17:44:51 SnortStartup[55465]: Ram free BEFORE starting Snort: 107M – Ram free AFTER starting Snort: 108M -- Mode ac-sparsebands -- Snort memory usage: |
| Mar 12 17:54:04 dhclient[261]: DHCPREQUEST on xl1 to 81.228.3.186 port 67 |
| Mar 12 17:54:43 last message repeated 3 times |
| Mar 12 17:56:45 last message repeated 7 times |
| Mar 12 18:00:44 last message repeated 9 times |
| Mar 12 18:01:39 dnsmasq[572]: reading /etc/resolv.conf |
| Mar 12 18:01:39 dnsmasq[572]: using nameserver 195.67.199.41#53 |
| Mar 12 18:01:39 dnsmasq[572]: using nameserver 195.67.199.40#53 |
| Mar 12 18:01:39 dnsmasq[572]: using nameserver 195.67.199.39#53 |
| Mar 12 18:02:17 dhclient[261]: DHCPREQUEST on xl1 to 255.255.255.255 port 67 |
| Mar 12 18:02:17 dhclient[261]: DHCPACK from 81.236.128.1 |
| Mar 12 18:02:17 dhclient[261]: short write: wanted 21 got 0 bytes |
| Mar 12 18:02:17 dhclient[261]: exiting. |
| Mar 12 20:13:17 login: login on ttyv0 as root |
| Mar 12 20:15:57 dhclient[81132]: DHCPDISCOVER on xl1 to 255.255.255.255 port 67 interval 5 |
| Mar 12 20:16:02 dhclient[81132]: DHCPDISCOVER on xl1 to 255.255.255.255 port 67 interval 6 |
| Mar 12 20:16:08 dhclient[81132]: DHCPDISCOVER on xl1 to 255.255.255.255 port 67 interval 7 |
| Mar 12 20:16:08 dhclient[81132]: DHCPOFFER from 81.236.128.1 |
| Mar 12 20:16:10 dhclient[81132]: DHCPREQUEST on xl1 to 255.255.255.255 port 67 |
| Mar 12 20:16:10 dhclient[81132]: DHCPACK from 81.236.128.1 |
| Mar 12 20:16:10 dhclient[81132]: bound to 81.236.134.30 – renewal in 600 seconds. |

sullrich

Remove snort and see if the problem persists.