Openvpn site-to-site problem

[g33k]

hye,

i have some little problem here,

the problem is like this, i have 2 pfsense box which connect site to site using openvpn. All the computer from hq be able to ping the site lan gateway, which is 10.0.12.1, but not be able to ping the computer inside  the lan Sites. And same thing happen on the Site side also, they cannot ping the lan from the Hq, plus the worse thing is they cant even ping the Lan Gateway (10.0.0.1)… pls, can someone assist me on this thing.

the brief config as follow:

HQ office:

WAN ip address: 102.XX.XXX.XX
Lan subnet: 10.0.0.0/22
Lan Gateway 10.0.0.1

OVPN config (server)
protocol: tcp
dynamic ip: tick
local port: 1194
adress pool: 10.0.10.0/22
remote network: 10.0.12.0/16
authentication method: Shared Key

Site office:

wan address: dynamic
lan subnet: 10.0.12.0/16
lan gateway: 10.0.12.1
OVPN config (client)
protocol: tcp
server address: 102.XX.XXX.XX
server port: 1194
interface ip: 10.0.10.0/22
remote network: 10.0.0.0/22
cryptography: shared key

the tun0 for both site is like this

HQ office is like this:
tun0: flags=8051 <up,pointopoint,running,multicast>metric 0 mtu 1500
       inet6 fe80::209:6bff:feed:b1cc%tun0 prefixlen 64 scopeid 0x1a
       inet 10.0.8.1 –> 10.0.8.2 netmask 0xffffffff
       Opened by PID 2118

Site office is like this:
tun0: flags=8051 <up,pointopoint,running,multicast>metric 0 mtu 1500
       inet6 fe80::211:25ff:fe1b:f1ea%tun0 prefixlen 64 scopeid 0x9
       inet 10.0.8.2 –> 10.0.8.1 netmask 0xffffffff
       Opened by PID 4681</up,pointopoint,running,multicast></up,pointopoint,running,multicast>

[kpa]

You have overlapping subnets, 10.0.12.0/16 (remote network in your server configuration) is in fact the whole 10.0.0.0/16 subnet 10.0.0.0 - 10.0.255.255. Also I would use UDP as transport for any VPN tunnel, TCP is inefficient for the job.

[g33k]

i have one another thing to ask, is it possible if i change the configuration into something like this?

HQ office:
–-----------
WAN ip address: 102.XX.XXX.XX
Lan subnet: 10.0.0.0/16
Lan Gateway 10.0.0.1

OVPN config (server)
protocol: udp
dynamic ip: tick
local port: 1194
adress pool: 10.10.0.0/16
remote network: 10.0.0.0/16
authentication method: Shared Key

Site office:

wan address: dynamic
lan subnet: 10.0.0.0/16
lan gateway: 10.0.25.1

OVPN config (client)
protocol: udp
server address: 102.XX.XXX.XX
server port: 1194
interface ip: 10.10.0.0/16
remote network: 10.0.0.0/16
cryptography: shared key

or any suggestion from the expert?  ::)