Wireless and lan , seperate in pfSense

gi7

|
wan
router 192.168.1.1 gw
|
LAN 1.x one PC 192.168.1.230 with wireless card
second PC, wire, 192.168.1.200

ap(pfSense) LAN 192.168.1.2
pfSense wireless card is opt1 (static, 192.168.1.3)
wan port is empty

i want, to connect with pc (1.230) on wireless (1.2 or 1.3)
default gw is 1.1

and i must view 1.200
but i dont want bridge between lan and opt1 on pfsense

how can my configuration must look

hoba

Your LAN and OPT subnet is identical. In such a scenario you only can use bridgeing, but you can filter that traffic too. Just turn on the filtering bridge at system>advanced and set up appropriate firewallrules.

gi7

if i have OPT1 on example 192.168.3.1
how can use my gateway 192.168.1.1 to work wireless users with internet?

hoba

Wireless users have to use the OPT1-IP as gateway. Simply set up a DHCP Server for the OPT1 at services>DHCP server, OPT1 tab. Then create a rule at firewall>rules, opt1 similiar to the default pass rule that is already present at firewall>rules, lan.