SquidGuard package TEST

dvserg

Screenshots

sg_main.jpg_thumb

sg_def.jpg_thumb

dvserg

Screenshots

sg_acl.jpg_thumb

SG_time.jpg_thumb

Justinw

This looks like an excellent package, but when I dloaded xmlrpc and then pointed my pf configs to the one specified, I didn't get anything showing up, is the location serving these up still online? I read the notes on sullrich's post, but there is a good chance I could be doing something wrong since I don't know much about the packages system just yet. Also the devoloper of this package would probably be very interested to know that there is a bounty posted for a content filtering packaged on an embedded system with a bounty of over $$1000 USD. Granted of course that doing this on an embedded system is a bit trickier. Here is the link to the post:
http://forum.pfsense.org/index.php/topic,2703.0.html

dvserg

@Justinw:

This looks like an excellent package, but when I dloaded xmlrpc and then pointed my pf configs to the one specified, I didn't get anything showing up, is the location serving these up still online? I read the notes on sullrich's post, but there is a good chance I could be doing something wrong since I don't know much about the packages system just yet. Also the devoloper of this package would probably be very interested to know that there is a bounty posted for a content filtering packaged on an embedded system with a bounty of over $$1000 USD. Granted of course that doing this on an embedded system is a bit trickier

You installed xmlrpc - OK
create /usr/local/www/packages (access rules 0755)
download file http://diskatel.narod.ru/pfSense/packages/pkg_config.xml and put them to /usr/local/www/packages (access rules 0644)
in /etc/inc/globals.inc remark
# "xmlrpcbaseurl" => "www.pfsense.com",
and enter
"xmlrpcbaseurl" => "x.x.x.x",

where x.x.x.x - you pfSense IP

if all right, then in package list must be my package :)

Justinw

I may have given the wrong permissions, I'll try again when I have some time, thank you!

dvserg

Sources returned to modification. I want change logic for more quickly work

dhipo

i am testing your sources of squidguard.
some points:
1- need to add file squidguard_log.xml into your pkg_config.xml
2- squidguard binary requires "libdb3.so.3" to run properly
3 - if you want a tester … i can do it

dvserg

1- need to add file squidguard_log.xml into your pkg_config.xml

yes - fixed

2- squidguard binary requires  "libdb3.so.3" to run properly

must installed with squidGuard automaticly

3 - if you want a tester ... i can do it

i will glad if you test this

All changes will updated in near time (I posting this)
Also will corrected some bugs

dhipo

other little issues…
change the name in pfsense services menu to other different of "proxy Server" because is confusing to newbies.

add new acl times is not working ? i cant add time ranges

apply new changes can be equal the pfsense add rule , it's too easy forgot to click that apply button in genreal settings tab.

just a tought ... have the squid package installed together, with customized squid.conf and unified menus, look at squid config panels in pfsense has an options to acl, to blacklists, and an customized instalation can be more easy to maintain .

dhipo

http://diskatel.narod.ru/squidguard/squidguard.zip is not working .. was removed ? the site was in russian .. i cant understand …

jahonix

@dhipo:

http://diskatel.narod.ru/squidguard/squidguard.zip is not working .. was removed ?

Click on "save target as" does work however.

dhipo

it's not working … i use wget .... and error 404 is file not found ....
lucky!!

dvserg

Hi all
Sorry, now i can't update sources.
Plz waite 1-2 day's - i will repair this.
Thanks

jahonix

Yeah, you seem right. Sorry!
I can DL the file but the zip archive is corrupt.

Well, it just DLs the HTML page and saves it as the archive. Sorry for the confusion here!

dvserg

This worked
(1) http://diskatel.narod.ru/pfSense/packages/pkg_config.xml
(2) http://diskatel.narod.ru/pfSense/packages/squidGuard-1.2.0_1.tbz
but squidGuard-1.2.0_1.tbz need correct - i tomorrow update
Also you can prepare squidGuard-1.2.0_1.tbz file too - need unpack, remove squid from 'expected packages' list and pack to back.
If take standart port from FreeBSD - this install latest version squid and system will have 2 squid versions (very bad >:()
Sorry

ps You may need update only you local pkg_config.xml form (1) source and all other's will downloaded and installed automaticly.

sullrich

When you are ready please send all of the needed bits to coreteam@pfsense.com and we will integrate this package into our master package area.

dvserg

@sullrich:

When you are ready please send all of the needed bits to coreteam@pfsense.com and we will integrate this package into our master package area.

OK
Now i catch bugs gui and fix specificity work SG.

dvserg

Updated new _http://diskatel.narod.ru/pfSense/packages/squidGuard-1.2.0_1.tbz
Now this package not need squid on installation (i remove this settings from this port)
May be possible uninstall/reinstall squid without deinstallation squidGuard.
–-----------------------------
Updated new version sources files. I rebuild core gui for faster work.
Plz anybody test new installation too.

1\. Need install local xml-rpc. How - pls looking for this topic
http://forum.pfsense.org/index.php/topic,312.0.html
2\. Download pkg_config.xml for this package from
http://diskatel.narod.ru/pfSense/packages/pkg_config.xml
and put them to you xml-rpc. If all placed correct - in package list you looking one package -squidGuard
3\. Install this package.

dvserg

Found problems first installation

config not autocreate
blacklist not scanned&updated

For fix - need in gui install (upload) blacklist and Apply changes
PS i near time fix this problems for auto update on first installation

dvserg

Ok
Ready for test ;)