SquidGuard package TEST

dhipo

ok … NAME .. Proxy Content Filter .. great..

the error on squid were because package db3 was missing ..... an pkg_add -r db3 solves all ...

now in production ...

dhipo

but …. ACLs with Times .... causes configuration error .. i try several ways .. with no success.

look the log

09.05.2007 11:39:09: sg_build_config: create squidGuard config
09.05.2007 11:39:09: sg_build_config: check configuration data
09.05.2007 11:39:09: sg_build_config: error configuration data. It's all errors:
ACL 'default' error: overtime destination name '[' not found
09.05.2007 11:39:09: sg_build_config: terminated.
09.05.2007 11:39:09: sg_build_default_config: Created default configuration. All content will blocked.
09.05.2007 11:39:09: sg_reconfigure: generate squidGuard config and save to /usr/local/etc/squidGuard/squidGuard.conf.

dvserg

OK Big thanks I found problem source, but update only in evning or tomorrow

dhipo

DVSerg ..what time is it you on UTC ?? i amin Brazil -3 UTC … and you?

dvserg

@dhipo:

DVSerg ..what time is it you on UTC ?? i amin Brazil -3 UTC … and you?

Now i have 16:05 09-05-2007 ;D

You can change self File /usr/local/pkgsquidGuard.inc
need add line

 $sgx[FLD_OVERDESTINATIONNAME] = trim( str_replace('[', '', $sgx[FLD_OVERDESTINATIONNAME]) );

LOOK this
Line 1120 must be

                } else {
                    $sgx[FLD_DESTINATIONNAME]     = trim( substr($pfx['dest'], 0, strpos($pfx['dest'], '[')) );
                    $sgx[FLD_OVERDESTINATIONNAME] = trim( strstr($pfx['dest'], '[') );
                    $sgx[FLD_OVERDESTINATIONNAME] = trim( str_replace(']', '', $sgx[FLD_OVERDESTINATIONNAME]) );
                    $sgx[FLD_OVERDESTINATIONNAME] = trim( str_replace('[', '', $sgx[FLD_OVERDESTINATIONNAME]) ); // add this
                }

and line 1159-1165

        } else {
            $sgx[FLD_DESTINATIONNAME]     = trim( substr($pfx['dest'], 0, strpos($pfx['dest'], '[')) );
            $sgx[FLD_OVERDESTINATIONNAME] = trim( strstr($pfx['dest'], '[') );
            $sgx[FLD_OVERDESTINATIONNAME] = trim( str_replace(']', '', $sgx[FLD_OVERDESTINATIONNAME]) );
            $sgx[FLD_OVERDESTINATIONNAME] = trim( str_replace('[', '', $sgx[FLD_OVERDESTINATIONNAME]) ); // add this
        }

dhipo

other suggestion

in destinations tab

domains , expressions and/or urls can be separeted always with a new line…

like this

anydomian.com
xyz.ccom
zzz.com
and so on

same to urls or expressions

sexy
pussy
etc

it's make more sense to use other imported lists

dvserg

I did not get a correct list of the transfer line from HTML form
I set 'space' as separator from the need
In expressions use '|' as separator by default in squidGuard db files
Expressions may contains any other RegularExpression string ;)

'sex|porno' - mean as expression 'sex OR porno'

ps I explore this problem once more.. but the first need test all other bugs

dhipo

new thing … is a must have thing ..... the log of squid access.log ... to the admins look and insert new blocked content

dhipo

other little bug

redirect field in destinations …. is no accepting any inputs ...

dvserg

new thing ... is a must have thing ..... the log of squid access.log ... to the admins look and insert new blocked content 
```Aaa .. my translator can't eat this  ;D More information plz.

i find the error ,
when you define an time in acl , default or other acls , the config shows only that above squidguard.conf, if no time is used in acl ,,, evething is fine ,,

It's not a bug - it's gui future. This field take all you ACL settings and store to config.xml

dhipo

sorry …. a new feature to add .... in the log TAB ... we can view squid logs aka ... /var/squid/log/access.log.... then admins can look who is looking for new forbbiden content and include in customized lists

dvserg

@dhipo:

sorry …. a new feature to add .... in the log TAB ... we can view squid logs aka ... /var/squid/log/access.log.... then admins can look who is looking for new forbbiden content and include in customized lists

Ok, i look this.
But exists one package - lightsquid, and develope SARG - report's for analyze squid Logs. I use lightsquid.

Justinw

Right now I'm getting this error in the cache.log over and over again:
/libexec/ld-elf.so.1: Shared object "libdb3.so.3" not found, required by "(squidGuard)"

I also am running snapshot from 5-9-2007

*edit

After I installed freeradius, the lib error went away, I guessed this would happen since freeradius use to be missing the same library at one point when it was broken. I thought it was fixed but then I tried just manually starting squid and it gave this error:

/libexec/ld-elf.so.1: Shared object "libdb3.so.3" not found, required by "squidGuard"

Along with that my cache.log errors changed to these:
2007/05/10 00:40:14| WARNING: url_rewriter #1 (FD 6) exited
2007/05/10 00:40:14| WARNING: url_rewriter #2 (FD 7) exited
2007/05/10 00:40:14| Too few url_rewriter processes are running
FATAL: The url_rewriter helpers are crashing too rapidly, need help!

Squid Cache (Version 2.6.STABLE5): Terminated abnormally.
CPU Usage: 0.118 seconds = 0.081 user + 0.037 sys
Maximum Resident Size: 7360 KB
Page faults with physical i/o: 0

you can confirm by using this command:
"ldd /usr/local/bin/squidGuard"
This is the output
squidGuard:
libdb3.so.3 => not found (0x0)
libc.so.6 => /lib/libc.so.6 (0x28086000)
it seems that this should come as part of the berkley DB

Resolution**
pkg_delete db3-3.3.11_3,1
pkg_add -r db3
cp /usr/local/lib/libdb3.so.3 /libexec/

Make sure squid is running if it isn't save its settings, make sure it starts
Hit apply on squidguard, you should see its status changed to started

Possible Bugs:
On a restart, squidGuard will decide to reinstall itself during the package resync. This has only happened once, and I will try to figure out how to reproduce the problem

dvserg

Berkley db BUG - installator find db3 PORT on my site too (some path what and squidGuard port archive), I add this PORT.
Please check new installation.

Also updated files with bugs.

ps Who need lightsquid - reload new pkg_config.xml. I add them sources and config.

dvserg

other suggestion
in destinations tab
domains , expressions and/or urls can be separeted always with a new line...
like this 
anydomian.com
xyz.ccom
zzz.com 
and so on
same to urls or expressions
sexy
pussy
etc 
it's make more sense to use other imported lists

I found 'enter' code. May be you idea realisabe. :)

dhipo

i am researching now … but install package snort ... brokens the squid, squidguard...

on new informations i will let you know

dhipo

do you know any mode to remove the package squidguard …. in the interface ... this stop and don't remove
can be done on command line ?

dhipo

look the error

when i click on squid ..
Fatal error: Call to undefined function: squid_before_form_general() in /usr/local/www/pkg_edit.php(86) : eval()'d code on line 1

dvserg

listing packages
pkg_info

delete
pkg_delete squidGuard-1.2.0_1

dvserg

@dhipo:

i am researching now … but install package snort ... brokens the squid, squidguard...

on new informations i will let you know

Snort … i not looking how this can work with SG
This possible (but i can have bad info).
I will find info about this problem