SquidGuard package TEST



  • @dhipo:

    ok … english is not my language too... but i ll try again ....

    remove an source, example source number 0... the others sources are not modified....
    to modify , you need open next source, move it to number 0 and save ...

    yes ... the squidguard.conf is ok ....

    Ok. I understand. This problem only with showing in gui and not a bug for config
    I will fix it. Thanks
    Also what with redirect field? (Fixed too)



  • All fixed
    squidguard.inc
    squidguard_src.xml



  • I'm installing right now, will report back with any problems.

    It seems to freeze on "custom_php_install_command()…" and doesn't do anything else for awhile. Any ideas?



  • @FlameboyC11:

    I'm installing right now, will report back with any problems.

    It seems to freeze on "custom_php_install_command()…" and doesn't do anything else for awhile. Any ideas?

    Looking bottom page message error?



  • It seems to freeze on "custom_php_install_command()…"

    I have this problem too …

    i have no logs that explain the problem (or i don't know where find them).
    my pfsense is very slow at the previous step :

    Downloading package configuration file… done.
    Saving updated package information... done.
    Downloading squidGuard and its dependencies... done.
    Checking for successful package installation... done.
    Loading package configuration... done.
    Configuring package components...
    Additional files... squidguard.inc

    When i start install … i have 5 or 7 minutes at this step : Additional files
    My browser is "loading page" ...
    but when the next step start "custom php install", the browser stop loading ...



  • I understand !!

    the http://diskatel.narod.ru/pfSense/packages/squidguard.xml file has some reference to ftp://10.xxxxxx so, private network …



  • @shreckbull:

    I understand !!

    the http://diskatel.narod.ru/pfSense/packages/squidguard.xml file has some reference to ftp://10.xxxxxx so, private network …

    Ups.. Sorry - this my bug. Try now.



  • i wwill test it now …



  • <pfsensepkgs><packages><package><name>squidGuard</name>
          <descr>High perfomance web proxy filter.</descr>
          <website>http://www.squidGuard.com/</website>
          <category>Network</category>
          <version>1.2.0_1</version>
          <maintainer>dv_serg@mail.ru</maintainer>
         
         
          <depends_on_package_base_url>http://iskatel.jino-net.ru/pfSense/</depends_on_package_base_url>
          <depends_on_package>squidGuard-1.2.0_1.tbz</depends_on_package>
          <status>ALPHA</status>
          <required_version>1.0</required_version>
          <config_file>http://diskatel.narod.ru/pfSense/packages/squidguard.xml</config_file>
          <configurationfile>squidguard.xml</configurationfile></package></packages>
      <endofpackages></endofpackages></pfsensepkgs>

    I have thos in my "local" pkg_config.xml



  • ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D

    THE INSTALL IS SUCCESS !!!!!!!!!!!!!!!!!

    ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D

    I have enabled by GUI the squidguard … but the service won't start ...

    I can(t start service bu GUI.

    I have no SH file in /usr/local/rc.d ...

    The bin of Squidguard is at : # /usr/local/bin/squidGuard
    when i start it by shell just type "/usr/local/bin/squidGuard" i lose shell but service is started ... when i breack (CTRL + C) i have the shell but service is stopped ...

    I will see how write an SH file ... but i'm not sure to know ...



  • looking from command prompt 'pkg_info'
    must be exists 'db-3.3.11_2,1'
    if no - need manually install them
    'pkg_add -r http://ftp13.freebsd.org/pub/FreeBSD/ports/i386/packages-6-stable/All/db-3.3.11_2,1''



  • thank !

    But i have already this pkg … in newer version :

    db3-3.3.11_3,1      The Berkeley DB package, revision 3.3



  • No, need only _2,1
    And … squid installed?



  • Yes squid installed …



  • i will reinstall in 6 or 7 day my fpsense for somes reasons :
    single CPU >> two CPU
    harddrive >> 2GB compact flash
    3x 3c905B >> 4x 3c905B
    ATX motherboard MSI >> industrial SBC motherboard
    PC case ATX >> industrial SBC chassis (like MGE ES8+ case's)
    ATX power supply >> industrial SBC power supply
    and the must !
    2x 128MB sdr PC133 >> 4x 256MB PC100 ecc reg

    I have killed pfsense (error, files missing maybe harddrive) … i stop all my work for 6-7 days in pfsense and squidguard !

    And i want to change all my network's ip adresses ... so i must reflect !



  • squidguard was broken when i upraded snapshot firmware …



  • @dhipo:

    squidguard was broken when i upraded snapshot firmware …

    broken on 1.2-beta2?



  • and could you reinstall it ?

    i think the best will be delete SG, reboot, reinstall SG and reboot … and see ...



  • I need 1-2 days for test this on Beta 2



  • This problem happens becose of SG package not in official list
    When firmware upgrade finished - processed update all packages prom www.pfsense.com. And not found SG package …

    Need manual add xml and inc files to /usr/local/pkg or deinstall package before and install after upgrade firmware



  • with full new install of 1.2beta2, my squid is unstable, it start, it stop when it want …
    light and/or guard, can't resolve the problem ...



  • on 1.2beta2 :
    boot pfsense ok
    start pfsense oK
    install squid ok
    configure squid ok
    start squid ok
    install squidguard ok
    configuration squidguard ok
    service squidguard ok
    install lightsquid ok
    configure lightsquid ok
    test lightsquid ok

    restart all services : ok

    reboot fpsense …. ok

    service squid start ok
    service squiguard start : no exist
    package lightsquid : uninstalled

    I love !!!



  • this is after upgrade firmware?



  • No, i have burn a 1.2b2 cdrom, boot with it … install into computer ... and configure and then, after a last reboot, install package !

    EDIT : On one other computer, with 1.0.1 updated to 1.2b2 ... the problem is there too ! (uninstall all package, reboot, update et install new package)



  • I found problem .. after each reboot my packages proccess reinstallation  ???
    Thanks for this bug. Fix wil be near time.



  • Package reinstallation OR uninstall :
    dashboard : reinstall
    squiguard : uninstall
    lightsquid : uninstall

    all other packages … no problems ... (nmap, states_new, snort and squid, phpsysinfos)



  • @shreckbull:

    Package reinstallation OR uninstall :
    dashboard : reinstall
    squiguard : uninstall
    lightsquid : uninstall

    all other packages … no problems ... (nmap, states_new, snort and squid, phpsysinfos)

    this may be global bug



  • i think …



  • where can we do a bug report ?



  • @shreckbull:

    where can we do a bug report ?

    Looking theme in English part Packages



  • no bug report needed !!!

    look here :
    http://forum.pfsense.org/index.php/topic,5388.0.html



  • Hello guys, first I'd like to congratulate you for the excellent work (i've read the entire topic) on squidguard;

    2nd, I'd like to know when can we expect to have SG on the main package list of Pfsense? in 1.2 final release can we expect SG? I may be wrong, but SG seems fine to be included in pfsense main package list today, with 1.2-beta2 out…. how about it??

    I know you can tell me that I always may install it manually, as you have done, but I'm new on pfsense and bsd culture and would not like to damage my install (as it would certainly happen)

    congratulations one more time and please, that you may consider place SG on main packages now :D

    thanks a lot

    srs



  • hi all,
    i was out a few days, because was sick with gripe, but i back …..

    i'm running SG in 1.2-BETA-1-TESTING-SNAPSHOT-07-02-2007
    built on Wed Jul 4 20:13:49 EDT 2007
    but som tricks was necessary.
    before upgrade must be copy the global.inc (the modified version to install SG)
    to global.inc.something
    i did upgrade.. on reboot SG was broken...
    copy again global.inc.something to global.inc(the modified version to install SG)..
    go to Instaled packages and reinstall...
    works good ...



  • still dont understand how to install SG on 1.2-beta-x….  :'(

    how can we expect this package in official packages list, within pfsense, for other users to test??

    thanks

    srs



  • @srs:

    still dont understand how to install SG on 1.2-beta-x….  :'(

    how can we expect this package in official packages list, within pfsense, for other users to test??

    thanks

    srs

    http://forum.pfsense.org/index.php/topic,5244.msg31615.html#msg31615



  • oh … S#it...

    an strange error

    on click in "Proxy Content Filter" show this message ...

    Fatal error: Call to undefined function: squidguard_before_form() in /usr/local/www/pkg_edit.php(86) : eval()'d code on line 1

    on 1.2-BETA-1-TESTING-SNAPSHOT-07-02-2007



  • @dvserg:

    @srs:

    still dont understand how to install SG on 1.2-beta-x….  :'(

    how can we expect this package in official packages list, within pfsense, for other users to test??

    thanks

    srs

    http://forum.pfsense.org/index.php/topic,5244.msg31615.html#msg31615

    Serg … this is an Brazilian Guy ...
    Let me help him ... BR portuguese...
    SRS ... i will send an private msg ..



  • @dhipo:

    @dvserg:

    @srs:

    still dont understand how to install SG on 1.2-beta-x….  :'(

    how can we expect this package in official packages list, within pfsense, for other users to test??

    thanks

    srs

    http://forum.pfsense.org/index.php/topic,5244.msg31615.html#msg31615

    Serg … this is an Brazilian Guy ...
    Let me help him ... BR portuguese...
    SRS ... i will send an private msg ..

    Big thanks..
    Now i have little free time  :'( (i have examination near 2 week's)



  • @dhipo:

    oh … S#it...

    an strange error

    on click in "Proxy Content Filter" show this message ...

    Fatal error: Call to undefined function: squidguard_before_form() in /usr/local/www/pkg_edit.php(86) : eval()'d code on line 1

    on 1.2-BETA-1-TESTING-SNAPSHOT-07-02-2007

    i downloaded new squidguard*.xml and inc files using fetch command….. error go away...
    but i'm running on neww trouble

    error with localhost acl ....

    to temporaly fix i removed this lines

    // fix bug with transparent proxy
             $sgconf[] = "dest localhost { # fix localhost access problem on transpa
    rent proxy ";
             $sgconf[] = "\t ip 127.0.0.1";
             $sgconf[] = "}";
             $sgconf[] = "";



  • Yes - this wrong code. I fix this near time


Log in to reply