SquidGuard package TEST



  • Has development on this stopped?



  • A couple of issues that I am seeing:
    MINOR
    The run status always says STOPPED
    When you install SquidGuard, it does not require Squid.  dependency failure?

    PROBLEMS
    After installing SquidGuard the first thing I do is download the latest blacklist.

    On the General Settings tab
    I click on ENABLE and I click the checkbox to enable the BLACKLIST.  I click on SAVE

    I click on the TIMES tab and create an entry for ALWAYS

    I click on the DEFAULT tab.  I set the default time to ALWAYS.  I click on porn and I click to deny access.  I click SAVE.  Under Default Redirect I put 403.  I go back to the General Settings tab and click APPLY.

    Then I try to see a porn page that exists in the /var/db/squidGuard/porn/domains file.  It was not blocked.

    RECOMMENDATIONS
    On the General Settings tab, under Blacklist, pls add the appropriate fields to allow automated updates (monthly, weekly, daily) and allow a few preset locations (Shalla Secure Services, MESD, etc).  I am borrowing ideas from the urlfilter developed by Marco Sondermann for IPCop.



  • @dcabot:

    A couple of issues that I am seeing:
    MINOR
    The run status always says STOPPED
    When you install SquidGuard, it does not require Squid.  dependency failure?

    PROBLEMS
    After installing SquidGuard the first thing I do is download the latest blacklist.

    On the General Settings tab
    I click on ENABLE and I click the checkbox to enable the BLACKLIST.  I click on SAVE

    I click on the TIMES tab and create an entry for ALWAYS

    I click on the DEFAULT tab.  I set the default time to ALWAYS.  I click on porn and I click to deny access.  I click SAVE.  Under Default Redirect I put 403.  I go back to the General Settings tab and click APPLY.

    Then I try to see a porn page that exists in the /var/db/squidGuard/porn/domains file.  It was not blocked.

    RECOMMENDATIONS
    On the General Settings tab, under Blacklist, pls add the appropriate fields to allow automated updates (monthly, weekly, daily) and allow a few preset locations (Shalla Secure Services, MESD, etc).  I am borrowing ideas from the urlfilter developed by Marco Sondermann for IPCop.

    ok

    squid must be installed to squidguard works

    second … it's necessary download blacklists to squidguard works...

    if you want an block everytime it's not necessary use time definition ..

    let'me know more about  your issue .



  • 2 dhipo: Thanks for you replay.  :)

    BlackList not obligatory. You can use you own destination rules;

    –-----------------------
    In the near future finally place corrections for "transparent proxy problem"
    I have to do(make) one uncomfortable thing, which will require reconfiguring the package when change internal IP (will need click Button "Apply")  :)



  • ok …
    customized destinations can be combined with default blacklists.

    use blacklists mean .. to block sites ... you need  or blacklists, or custom destinations , or both ..



  • Here I have the same: squidguard installed and configured but do not block porn site taken on file /var/db/squidGuard/porn/domains…

    My config is the most simple possible, no time, only default acl blocking porn...

    any idea?

    srs



  • Please answer on some question:

    • you install package from official list ?
    • you don't update blacklist from internet? (if update - where blacklist url)
    • what url's non blocked?

    ps
    need check exists this url on block list or no.



  • @dvserg:

    Please answer on some question:

    • you install package from official list ?
    • you don't update blacklist from internet? (if update - where blacklist url)
    • what url's non blocked?

    ps
    need check exists this url on block list or no.

    • Yes, package installed from official list
    • Yes, downloaded black list from internet (http://squidguard.mesd.k12.or.us/blacklists.tgz)
    • I tested with one url taken from the file /var/db/squidGuard/porn/domains, line 600000, if I'm not wrong; it should work for any of that urls, isnt??

    thanks

    ps: its strange, cause it seems SG is running: my processor load is up to 51% (dual core, pentium D)!!!



  • Also

    • squidGuard started (looking main package page for this or Services menu)?
    • squid transparent mode?
    • and can you post squidGuard config? (from 'Log' page) (to pm for example)


  • @dvserg:

    Also

    • squidGuard started (looking main package page for this or Services menu)?
    • squid transparent mode?
    • and can you post squidGuard config? (from 'Log' page) (to pm for example)
    • Squidguard running, from services menu
    • proxy in transparency mode since before sg
    • here goes the config:
      /usr/local/etc/squidGuard/squidGuard.conf

    ============================================================

    SquidGuard configuration file

    This file generated automaticly with SquidGuard configurator

    (C)2006 Serg Dvoriancev

    email: dv_serg@mail.ru

    ============================================================

    logdir /var/squidGuard/log
    dbhome /var/db/squidGuard

    acl {
    default {
    pass none
    redirect http://127.0.0.1/sgerror.php
    }
    }

    There is something wrong with this config, here I cannot see my source (Lan) and any configuration about blacklist…

    is there any way of reseting sg config?



  • My liken 'transparent mode'.
    Can you tomorrow continue checking?
    I know this problem. Believe solve this problem.
    Thanks. Good night.



  • @dvserg:

    My liken 'transparent mode'.
    Can you tomorrow continue checking?
    I know this problem. Believe solve this problem.
    Thanks. Good night.

    I can check tomorrow, It would be nice to help; only tell me what to do.

    thanks and good night!



  • Hi
    Please Enable View GIU Log option & press 'Save' button,
    Then press 'Apply' button and get to my PM 'Web GUI log (Last 50)' content and
    result squidGuard config from last (Log) page



  • 19.03.2008 11:56:14 : sg_reconfigure_user_db: STOPPED; User destinations list empty

    What is mean?



  • @KARLAGIN:

    19.03.2008 11:56:14 : sg_reconfigure_user_db: STOPPED; User destinations list empty

    What is mean?

    In Destinations page you have Empty item(s)
    One from domains, expressions, urls must be defined.


Log in to reply