Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    ::Gak Perlu Ragu Pake RC1 64bit untuk Mesin [Proxy] Anda::

    Indonesian
    10
    52
    27.7k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • A
      abnisrea
      last edited by

      Sudah dicek n diganti-ganti bahkan harddisknya sata ke ata, lan dimatiin dulu dibiosnya jg udah tetep nyangkut di 38% sama orang bule juga ada yg kasus ginian http://forum.pfsense.org/index.php?action=printpage;topic=31907.0 ada yg bisa bantu…?

      1 Reply Last reply Reply Quote 0
      • P
        pfz
        last edited by

        @abnisrea:

        Sudah dicek n diganti-ganti bahkan harddisknya sata ke ata, lan dimatiin dulu dibiosnya jg udah tetep nyangkut di 38% sama orang bule juga ada yg kasus ginian http://forum.pfsense.org/index.php?action=printpage;topic=31907.0 ada yg bisa bantu…?

        Lha ente apa dah coba solusi dari link diatas…?

        Mengutip beberapa kalimat dari link diatas sperti ini :

        by Terafloppy
        _Ok I think I solved it (worked for me).

        You must be sure to enable Virtual Technology in the BIOS for the CPU settings.  After that 2.0 Feb 8 installed all the way, (use to hang at 45%).

        I think Pfsense sees that the CPU is VT capable and attempts to load a module or service to interact with that ability.  However, even though the CPU advertises this capablity, it may not actually have the feature turned on, thus breaking the install.

        Anyway, no promises, but this worked for me._

        1 Reply Last reply Reply Quote 0
        • S
          serangku
          last edited by

          hanya penasaran …

          itu asli pake pros Xeon ?
          mantap ...
          om cukup bersahabat dengan yg 64 bit
          sudah coba download iso dari lokasi yg lain, bad iso perhap ?
          coba di defaultkan saja bios nya dulu

          semoga bisa membantu

          1 Reply Last reply Reply Quote 0
          • P
            poscom
            last edited by

            klo namanya OS pf amd64bit itu sekedar nama, artinya ga mesti merek proc. amd64.
            sy test dgn RC1 amd di seri pentium d ecek2 sampe sekarang ok banget ga ada debug2 erorr
            di pentium4 LGA dell 3ghz sampe sekarang juga.
            yg penting 64bit makannya RAM, ga tau minumnya apa?  ;D

            1 Reply Last reply Reply Quote 0
            • A
              abnisrea
              last edited by

              Oo gitu Mr. Poscom, aku dh coba.. tp emang tetep Stop di 38% mungkin masalah bios kali ya.. tp tetap dicoba lg ampe running..  ;D ;D ;D

              1 Reply Last reply Reply Quote 0
              • P
                poscom
                last edited by

                yah bener, sy juga ngalami, kadang dah runing 1hr kena debug, sepertinya amd ikut iklan di pf 2.0

                1 Reply Last reply Reply Quote 0
                • A
                  abnisrea
                  last edited by

                  Aku dah coba install melalui cpu lain karena hang 38% terus, setelah itu harrdisnya aku kembalikan ke cpu xeon dan running good, after  12 jam terjadi error diserverku dan ini diagnos nya tolong dibedah apa kira2 penyebabnya

                  $ dmesg
                  Copyright © 1992-2010 The FreeBSD Project.
                  Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
                  The Regents of the University of California. All rights reserved.
                  FreeBSD is a registered trademark of The FreeBSD Foundation.
                  FreeBSD 8.1-RELEASE-p4 #0: Tue Sep 13 17:04:54 EDT 2011
                     root@FreeBSD_8.0_pfSense_2.0-AMD64.snaps.pfsense.org:/usr/obj./usr/pfSensesrc/src/sys/pfSense_SMP.8 amd64
                  Timecounter "i8254" frequency 1193182 Hz quality 0
                  CPU: Intel(R) Xeon(TM) CPU 3.00GHz (3000.13-MHz K8-class CPU)
                   Origin = "GenuineIntel"  Id = 0xf41  Family = f  Model = 4  Stepping = 1
                   Features=0xbfebfbff <fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>Features2=0x641d <sse3,dtes64,mon,ds_cpl,cnxt-id,cx16,xtpr>AMD Features=0x20100800 <syscall,nx,lm>TSC: P-state invariant
                  real memory  = 2147483648 (2048 MB)
                  avail memory = 2015756288 (1922 MB)
                  ACPI APIC Table: <030811 APIC1634>
                  FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
                  FreeBSD/SMP: 1 package(s) x 1 core(s) x 2 HTT threads
                  cpu0 (BSP): APIC ID:  0
                  cpu1 (AP/HT): APIC ID:  1
                  ioapic0: Changing APIC ID to 2
                  ioapic0 <version 2.0="">irqs 0-23 on motherboard
                  netisr_init: forcing maxthreads to 1 and bindthreads to 0 for device polling
                  wlan: mac acl policy registered
                  ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
                  ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
                  module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff80470e30, 0) error 1
                  wpi: You need to read the LICENSE file in /usr/share/doc/legal/intel_wpi/.
                  wpi: If you agree with the license, set legal.intel_wpi.license_ack=1 in /boot/loader.conf.
                  module_register_init: MOD_LOAD (wpi_fw, 0xffffffff806548f0, 0) error 1
                  ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
                  ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
                  module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff80470cf0, 0) error 1
                  ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
                  ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
                  module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff80470d90, 0) error 1
                  kbd1 at kbdmux0
                  cryptosoft0: <software crypto="">on motherboard
                  padlock0: No ACE support.
                  acpi0: <030811 RSDT1634> on motherboard
                  acpi0: [ITHREAD]
                  acpi0: Power Button (fixed)
                  acpi0: reservation of 0, a0000 (3) failed
                  acpi0: reservation of 100000, 7dd00000 (3) failed
                  Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
                  acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
                  cpu0: <acpi cpu="">on acpi0
                  cpu1: <acpi cpu="">on acpi0
                  pcib0: <acpi host-pci="" bridge="">port 0xcf8-0xcff on acpi0
                  pci0: <acpi pci="" bus="">on pcib0
                  vgapci0: <vga-compatible display="">port 0xcc00-0xcc07 mem 0xfe400000-0xfe7fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0
                  agp0: <intel g41="" svga="" controller="">on vgapci0
                  agp0: detected 32764k stolen memory
                  agp0: aperture size is 256M
                  pci0: <multimedia, hda="">at device 27.0 (no driver attached)
                  pcib1: <acpi pci-pci="" bridge="">irq 16 at device 28.0 on pci0
                  pci1: <acpi pci="" bus="">on pcib1
                  pcib2: <acpi pci-pci="" bridge="">irq 18 at device 28.2 on pci0
                  pci2: <acpi pci="" bus="">on pcib2
                  re0: <realtek 10="" 8101e="" 8102e="" 8102el="" 8103e="" pcie="" 100basetx="">port 0xd800-0xd8ff mem 0xfdfff000-0xfdffffff,0xfdfe0000-0xfdfeffff irq 18 at device 0.0 on pci2
                  re0: Using 1 MSI messages
                  re0: Chip rev. 0x24800000
                  re0: MAC rev. 0x00400000
                  miibus0: <mii bus="">on re0
                  rlphy0: <rtl8201l 10="" 100="" media="" interface="">PHY 1 on miibus0
                  rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
                  re0: [FILTER]
                  uhci0: <intel 82801g="" (ich7)="" usb="" controller="" usb-a="">port 0xc880-0xc89f irq 23 at device 29.0 on pci0
                  uhci0: [ITHREAD]
                  uhci0: LegSup = 0x2f00
                  usbus0: <intel 82801g="" (ich7)="" usb="" controller="" usb-a="">on uhci0
                  uhci1: <intel 82801g="" (ich7)="" usb="" controller="" usb-b="">port 0xc800-0xc81f irq 19 at device 29.1 on pci0
                  uhci1: [ITHREAD]
                  uhci1: LegSup = 0x2f00
                  usbus1: <intel 82801g="" (ich7)="" usb="" controller="" usb-b="">on uhci1
                  uhci2: <intel 82801g="" (ich7)="" usb="" controller="" usb-c="">port 0xc480-0xc49f irq 18 at device 29.2 on pci0
                  uhci2: [ITHREAD]
                  uhci2: LegSup = 0x2f00
                  usbus2: <intel 82801g="" (ich7)="" usb="" controller="" usb-c="">on uhci2
                  uhci3: <intel 82801g="" (ich7)="" usb="" controller="" usb-d="">port 0xc400-0xc41f irq 16 at device 29.3 on pci0
                  uhci3: [ITHREAD]
                  uhci3: LegSup = 0x2f00
                  usbus3: <intel 82801g="" (ich7)="" usb="" controller="" usb-d="">on uhci3
                  ehci0: <intel 82801gb="" r="" (ich7)="" usb="" 2.0="" controller="">mem 0xfe9f7c00-0xfe9f7fff irq 23 at device 29.7 on pci0
                  ehci0: [ITHREAD]
                  usbus4: EHCI version 1.0
                  usbus4: <intel 82801gb="" r="" (ich7)="" usb="" 2.0="" controller="">on ehci0
                  pcib3: <acpi pci-pci="" bridge="">at device 30.0 on pci0
                  pci3: <acpi pci="" bus="">on pcib3
                  rl0: <realtek 10="" 8139="" 100basetx="">port 0xe800-0xe8ff mem 0xfebffc00-0xfebffcff irq 16 at device 1.0 on pci3
                  miibus1: <mii bus="">on rl0
                  rlphy1: <realtek internal="" media="" interface="">PHY 0 on miibus1
                  rlphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
                  rl0: [ITHREAD]
                  isab0: <pci-isa bridge="">at device 31.0 on pci0
                  isa0: <isa bus="">on isab0
                  atapci0: <intel ich7="" sata300="" controller="">port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.2 on pci0
                  ata0: <ata 0="" channel="">on atapci0
                  ata0: [ITHREAD]
                  ata1: <ata 1="" channel="">on atapci0
                  ata1: [ITHREAD]
                  pci0: <serial bus,="" smbus="">at device 31.3 (no driver attached)
                  acpi_button0: <power button="">on acpi0
                  atrtc0: <at realtime="" clock="">port 0x70-0x71 irq 8 on acpi0
                  uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
                  uart0: [FILTER]
                  uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
                  uart1: [FILTER]
                  ppc0: <parallel port="">port 0x378-0x37f irq 7 on acpi0
                  ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
                  ppc0: [ITHREAD]
                  ppbus0: <parallel port="" bus="">on ppc0
                  plip0: <plip network="" interface="">on ppbus0
                  plip0: [ITHREAD]
                  lpt0: <printer>on ppbus0
                  lpt0: [ITHREAD]
                  lpt0: Interrupt-driven port
                  ppi0: <parallel i="" o="">on ppbus0
                  atkbdc0: <keyboard controller="" (i8042)="">port 0x60,0x64 irq 1 on acpi0
                  atkbd0: <at keyboard="">irq 1 on atkbdc0
                  kbd0 at atkbd0
                  atkbd0: [GIANT-LOCKED]
                  atkbd0: [ITHREAD]
                  psm0: <ps 2="" mouse="">irq 12 on atkbdc0
                  psm0: [GIANT-LOCKED]
                  psm0: [ITHREAD]
                  psm0: model IntelliMouse, device ID 3
                  orm0: <isa option="" rom="">at iomem 0xc0000-0xcc7ff on isa0
                  sc0: <system console="">at flags 0x100 on isa0
                  sc0: VGA <16 virtual consoles, flags=0x300>
                  vga0: <generic isa="" vga="">at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
                  p4tcc0: <cpu frequency="" thermal="" control="">on cpu0
                  p4tcc1: <cpu frequency="" thermal="" control="">on cpu1
                  Timecounters tick every 1.000 msec
                  IPsec: Initialized Security Association Processing.
                  usbus0: 12Mbps Full Speed USB v1.0
                  usbus1: 12Mbps Full Speed USB v1.0
                  usbus2: 12Mbps Full Speed USB v1.0
                  usbus3: 12Mbps Full Speed USB v1.0
                  usbus4: 480Mbps High Speed USB v2.0
                  ad0: 152627MB <seagate st3160212as="" 3.aah="">at ata0-master UDMA100 SATA
                  ugen0.1: <intel>at usbus0
                  uhub0: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus0
                  ugen1.1: <intel>at usbus1
                  uhub1: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus1
                  ugen2.1: <intel>at usbus2
                  uhub2: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus2
                  ugen3.1: <intel>at usbus3
                  uhub3: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus3
                  ugen4.1: <intel>at usbus4
                  uhub4: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus4
                  uhub0: 2 ports with 2 removable, self powered
                  uhub1: 2 ports with 2 removable, self powered
                  uhub2: 2 ports with 2 removable, self powered
                  uhub3: 2 ports with 2 removable, self powered
                  uhub4: 8 ports with 8 removable, self powered
                  SMP: AP CPU #1 Launched!
                  Trying to mount root from ufs:/dev/ad0s1a
                  pflog0: promiscuous mode enabled
                  rl0: link state changed to UP
                  pid 55423 (squid), uid 100: exited on signal 6
                  pid 58081 (squid), uid 100: exited on signal 6
                  pid 60391 (squid), uid 100: exited on signal 6
                  pid 61043 (squid), uid 62: exited on signal 6
                  pid 9810 (squid), uid 62: exited on signal 6
                  pid 10253 (squid), uid 62: exited on signal 6
                  pflog0: promiscuous mode disabled
                  Waiting (max 60 seconds) for system process vnlru' to stop…done Waiting (max 60 seconds) for system process bufdaemon' to stop...done
                  Waiting (max 60 seconds) for system process `syncer' to stop...
                  Syncing disks, vnodes remaining...0 0 done
                  All buffers synced.
                  Copyright (c) 1992-2010 The FreeBSD Project.
                  Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
                  The Regents of the University of California. All rights reserved.
                  FreeBSD is a registered trademark of The FreeBSD Foundation.
                  FreeBSD 8.1-RELEASE-p4 #0: Tue Sep 13 17:04:54 EDT 2011
                     root@FreeBSD_8.0_pfSense_2.0-AMD64.snaps.pfsense.org:/usr/obj./usr/pfSensesrc/src/sys/pfSense_SMP.8 amd64
                  Timecounter "i8254" frequency 1193182 Hz quality 0
                  CPU: Intel(R) Xeon(TM) CPU 3.00GHz (3000.12-MHz K8-class CPU)
                   Origin = "GenuineIntel"  Id = 0xf41  Family = f  Model = 4  Stepping = 1
                   Features=0xbfebfbff <fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>Features2=0x641d <sse3,dtes64,mon,ds_cpl,cnxt-id,cx16,xtpr>AMD Features=0x20100800 <syscall,nx,lm>TSC: P-state invariant
                  real memory  = 2147483648 (2048 MB)
                  avail memory = 2015756288 (1922 MB)
                  ACPI APIC Table: <030811 APIC1634>
                  FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
                  FreeBSD/SMP: 1 package(s) x 1 core(s) x 2 HTT threads
                  cpu0 (BSP): APIC ID:  0
                  cpu1 (AP/HT): APIC ID:  1
                  ioapic0: Changing APIC ID to 2
                  ioapic0 <version 2.0="">irqs 0-23 on motherboard
                  netisr_init: forcing maxthreads to 1 and bindthreads to 0 for device polling
                  wlan: mac acl policy registered
                  ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
                  ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
                  module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff80470e30, 0) error 1
                  wpi: You need to read the LICENSE file in /usr/share/doc/legal/intel_wpi/.
                  wpi: If you agree with the license, set legal.intel_wpi.license_ack=1 in /boot/loader.conf.
                  module_register_init: MOD_LOAD (wpi_fw, 0xffffffff806548f0, 0) error 1
                  ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
                  ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
                  module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff80470cf0, 0) error 1
                  ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
                  ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
                  module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff80470d90, 0) error 1
                  kbd1 at kbdmux0
                  cryptosoft0: <software crypto="">on motherboard
                  padlock0: No ACE support.
                  acpi0: <030811 RSDT1634> on motherboard
                  acpi0: [ITHREAD]
                  acpi0: Power Button (fixed)
                  acpi0: reservation of 0, a0000 (3) failed
                  acpi0: reservation of 100000, 7dd00000 (3) failed
                  Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
                  acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
                  cpu0: <acpi cpu="">on acpi0
                  cpu1: <acpi cpu="">on acpi0
                  pcib0: <acpi host-pci="" bridge="">port 0xcf8-0xcff on acpi0
                  pci0: <acpi pci="" bus="">on pcib0
                  vgapci0: <vga-compatible display="">port 0xcc00-0xcc07 mem 0xfe400000-0xfe7fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0
                  agp0: <intel g41="" svga="" controller="">on vgapci0
                  agp0: detected 32764k stolen memory
                  agp0: aperture size is 256M
                  pci0: <multimedia, hda="">at device 27.0 (no driver attached)
                  pcib1: <acpi pci-pci="" bridge="">irq 16 at device 28.0 on pci0
                  pci1: <acpi pci="" bus="">on pcib1
                  pcib2: <acpi pci-pci="" bridge="">irq 18 at device 28.2 on pci0
                  pci2: <acpi pci="" bus="">on pcib2
                  re0: <realtek 10="" 8101e="" 8102e="" 8102el="" 8103e="" pcie="" 100basetx="">port 0xd800-0xd8ff mem 0xfdfff000-0xfdffffff,0xfdfe0000-0xfdfeffff irq 18 at device 0.0 on pci2
                  re0: Using 1 MSI messages
                  re0: Chip rev. 0x24800000
                  re0: MAC rev. 0x00400000
                  miibus0: <mii bus="">on re0
                  rlphy0: <rtl8201l 10="" 100="" media="" interface="">PHY 1 on miibus0
                  rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
                  re0: [FILTER]
                  uhci0: <intel 82801g="" (ich7)="" usb="" controller="" usb-a="">port 0xc880-0xc89f irq 23 at device 29.0 on pci0
                  uhci0: [ITHREAD]
                  uhci0: LegSup = 0x2f00
                  usbus0: <intel 82801g="" (ich7)="" usb="" controller="" usb-a="">on uhci0
                  uhci1: <intel 82801g="" (ich7)="" usb="" controller="" usb-b="">port 0xc800-0xc81f irq 19 at device 29.1 on pci0
                  uhci1: [ITHREAD]
                  uhci1: LegSup = 0x2f00
                  usbus1: <intel 82801g="" (ich7)="" usb="" controller="" usb-b="">on uhci1
                  uhci2: <intel 82801g="" (ich7)="" usb="" controller="" usb-c="">port 0xc480-0xc49f irq 18 at device 29.2 on pci0
                  uhci2: [ITHREAD]
                  uhci2: LegSup = 0x2f00
                  usbus2: <intel 82801g="" (ich7)="" usb="" controller="" usb-c="">on uhci2
                  uhci3: <intel 82801g="" (ich7)="" usb="" controller="" usb-d="">port 0xc400-0xc41f irq 16 at device 29.3 on pci0
                  uhci3: [ITHREAD]
                  uhci3: LegSup = 0x2f00
                  usbus3: <intel 82801g="" (ich7)="" usb="" controller="" usb-d="">on uhci3
                  ehci0: <intel 82801gb="" r="" (ich7)="" usb="" 2.0="" controller="">mem 0xfe9f7c00-0xfe9f7fff irq 23 at device 29.7 on pci0
                  ehci0: [ITHREAD]
                  usbus4: EHCI version 1.0
                  usbus4: <intel 82801gb="" r="" (ich7)="" usb="" 2.0="" controller="">on ehci0
                  pcib3: <acpi pci-pci="" bridge="">at device 30.0 on pci0
                  pci3: <acpi pci="" bus="">on pcib3
                  rl0: <realtek 10="" 8139="" 100basetx="">port 0xe800-0xe8ff mem 0xfebffc00-0xfebffcff irq 16 at device 1.0 on pci3
                  miibus1: <mii bus="">on rl0
                  rlphy1: <realtek internal="" media="" interface="">PHY 0 on miibus1
                  rlphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
                  rl0: [ITHREAD]
                  isab0: <pci-isa bridge="">at device 31.0 on pci0
                  isa0: <isa bus="">on isab0
                  atapci0: <intel ich7="" sata300="" controller="">port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.2 on pci0
                  ata0: <ata 0="" channel="">on atapci0
                  ata0: [ITHREAD]
                  ata1: <ata 1="" channel="">on atapci0
                  ata1: [ITHREAD]
                  pci0: <serial bus,="" smbus="">at device 31.3 (no driver attached)
                  acpi_button0: <power button="">on acpi0
                  atrtc0: <at realtime="" clock="">port 0x70-0x71 irq 8 on acpi0
                  uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
                  uart0: [FILTER]
                  uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
                  uart1: [FILTER]
                  ppc0: <parallel port="">port 0x378-0x37f irq 7 on acpi0
                  ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
                  ppc0: [ITHREAD]
                  ppbus0: <parallel port="" bus="">on ppc0
                  plip0: <plip network="" interface="">on ppbus0
                  plip0: [ITHREAD]
                  lpt0: <printer>on ppbus0
                  lpt0: [ITHREAD]
                  lpt0: Interrupt-driven port
                  ppi0: <parallel i="" o="">on ppbus0
                  atkbdc0: <keyboard controller="" (i8042)="">port 0x60,0x64 irq 1 on acpi0
                  atkbd0: <at keyboard="">irq 1 on atkbdc0
                  kbd0 at atkbd0
                  atkbd0: [GIANT-LOCKED]
                  atkbd0: [ITHREAD]
                  psm0: <ps 2="" mouse="">irq 12 on atkbdc0
                  psm0: [GIANT-LOCKED]
                  psm0: [ITHREAD]
                  psm0: model IntelliMouse, device ID 3
                  orm0: <isa option="" rom="">at iomem 0xc0000-0xcc7ff on isa0
                  sc0: <system console="">at flags 0x100 on isa0
                  sc0: VGA <16 virtual consoles, flags=0x300>
                  vga0: <generic isa="" vga="">at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
                  p4tcc0: <cpu frequency="" thermal="" control="">on cpu0
                  p4tcc1: <cpu frequency="" thermal="" control="">on cpu1
                  Timecounters tick every 1.000 msec
                  IPsec: Initialized Security Association Processing.
                  usbus0: 12Mbps Full Speed USB v1.0
                  usbus1: 12Mbps Full Speed USB v1.0
                  usbus2: 12Mbps Full Speed USB v1.0
                  usbus3: 12Mbps Full Speed USB v1.0
                  usbus4: 480Mbps High Speed USB v2.0
                  ad0: 152627MB <seagate st3160212as="" 3.aah="">at ata0-master UDMA100 SATA
                  ugen0.1: <intel>at usbus0
                  uhub0: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus0
                  ugen1.1: <intel>at usbus1
                  uhub1: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus1
                  ugen2.1: <intel>at usbus2
                  uhub2: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus2
                  ugen3.1: <intel>at usbus3
                  uhub3: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus3
                  ugen4.1: <intel>at usbus4
                  uhub4: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus4
                  uhub0: 2 ports with 2 removable, self powered
                  uhub1: 2 ports with 2 removable, self powered
                  uhub2: 2 ports with 2 removable, self powered
                  uhub3: 2 ports with 2 removable, self powered
                  uhub4: 8 ports with 8 removable, self powered
                  SMP: AP CPU #1 Launched!
                  Trying to mount root from ufs:/dev/ad0s1a
                  pflog0: promiscuous mode enabled
                  rl0: link state changed to UP
                  rl0: link state changed to DOWN
                  rl0: link state changed to UP

                  Fatal trap 9: general protection fault while in kernel mode
                  cpuid = 0; apic id = 00
                  instruction pointer = 0x20:0xffffffff80f007fb
                  stack pointer        = 0x28:0xffffff802e46eb30
                  frame pointer        = 0x28:0xffffff802e46ec30
                  code segment = base 0x0, limit 0xfffff, type 0x1b
                  = DPL 0, pres 1, long 1, def32 0, gran 1
                  processor eflags = interrupt enabled, resume, IOPL = 0
                  current process = 23272 (rate)
                  Copyright © 1992-2010 The FreeBSD Project.
                  Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
                  The Regents of the University of California. All rights reserved.
                  FreeBSD is a registered trademark of The FreeBSD Foundation.
                  FreeBSD 8.1-RELEASE-p4 #0: Tue Sep 13 17:04:54 EDT 2011
                     root@FreeBSD_8.0_pfSense_2.0-AMD64.snaps.pfsense.org:/usr/obj./usr/pfSensesrc/src/sys/pfSense_SMP.8 amd64
                  Timecounter "i8254" frequency 1193182 Hz quality 0
                  CPU: Intel(R) Xeon(TM) CPU 3.00GHz (3000.13-MHz K8-class CPU)
                   Origin = "GenuineIntel"  Id = 0xf41  Family = f  Model = 4  Stepping = 1
                   Features=0xbfebfbff <fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>Features2=0x641d <sse3,dtes64,mon,ds_cpl,cnxt-id,cx16,xtpr>AMD Features=0x20100800 <syscall,nx,lm>TSC: P-state invariant
                  real memory  = 2147483648 (2048 MB)
                  avail memory = 2015756288 (1922 MB)
                  ACPI APIC Table: <030811 APIC1634>
                  FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
                  FreeBSD/SMP: 1 package(s) x 1 core(s) x 2 HTT threads
                  cpu0 (BSP): APIC ID:  0
                  cpu1 (AP/HT): APIC ID:  1
                  ioapic0: Changing APIC ID to 2
                  ioapic0 <version 2.0="">irqs 0-23 on motherboard
                  netisr_init: forcing maxthreads to 1 and bindthreads to 0 for device polling
                  wlan: mac acl policy registered
                  ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
                  ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
                  module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff80470e30, 0) error 1
                  wpi: You need to read the LICENSE file in /usr/share/doc/legal/intel_wpi/.
                  wpi: If you agree with the license, set legal.intel_wpi.license_ack=1 in /boot/loader.conf.
                  module_register_init: MOD_LOAD (wpi_fw, 0xffffffff806548f0, 0) error 1
                  ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
                  ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
                  module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff80470cf0, 0) error 1
                  ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
                  ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
                  module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff80470d90, 0) error 1
                  kbd1 at kbdmux0
                  cryptosoft0: <software crypto="">on motherboard
                  padlock0: No ACE support.
                  acpi0: <030811 RSDT1634> on motherboard
                  acpi0: [ITHREAD]
                  acpi0: Power Button (fixed)
                  acpi0: reservation of 0, a0000 (3) failed
                  acpi0: reservation of 100000, 7dd00000 (3) failed
                  Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
                  acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
                  cpu0: <acpi cpu="">on acpi0
                  cpu1: <acpi cpu="">on acpi0
                  pcib0: <acpi host-pci="" bridge="">port 0xcf8-0xcff on acpi0
                  pci0: <acpi pci="" bus="">on pcib0
                  vgapci0: <vga-compatible display="">port 0xcc00-0xcc07 mem 0xfe400000-0xfe7fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0
                  agp0: <intel g41="" svga="" controller="">on vgapci0
                  agp0: detected 32764k stolen memory
                  agp0: aperture size is 256M
                  pci0: <multimedia, hda="">at device 27.0 (no driver attached)
                  pcib1: <acpi pci-pci="" bridge="">irq 16 at device 28.0 on pci0
                  pci1: <acpi pci="" bus="">on pcib1
                  pcib2: <acpi pci-pci="" bridge="">irq 18 at device 28.2 on pci0
                  pci2: <acpi pci="" bus="">on pcib2
                  re0: <realtek 10="" 8101e="" 8102e="" 8102el="" 8103e="" pcie="" 100basetx="">port 0xd800-0xd8ff mem 0xfdfff000-0xfdffffff,0xfdfe0000-0xfdfeffff irq 18 at device 0.0 on pci2
                  re0: Using 1 MSI messages
                  re0: Chip rev. 0x24800000
                  re0: MAC rev. 0x00400000
                  miibus0: <mii bus="">on re0
                  rlphy0: <rtl8201l 10="" 100="" media="" interface="">PHY 1 on miibus0
                  rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
                  re0: [FILTER]
                  uhci0: <intel 82801g="" (ich7)="" usb="" controller="" usb-a="">port 0xc880-0xc89f irq 23 at device 29.0 on pci0
                  uhci0: [ITHREAD]
                  uhci0: LegSup = 0x2f00
                  usbus0: <intel 82801g="" (ich7)="" usb="" controller="" usb-a="">on uhci0
                  uhci1: <intel 82801g="" (ich7)="" usb="" controller="" usb-b="">port 0xc800-0xc81f irq 19 at device 29.1 on pci0
                  uhci1: [ITHREAD]
                  uhci1: LegSup = 0x2f00
                  usbus1: <intel 82801g="" (ich7)="" usb="" controller="" usb-b="">on uhci1
                  uhci2: <intel 82801g="" (ich7)="" usb="" controller="" usb-c="">port 0xc480-0xc49f irq 18 at device 29.2 on pci0
                  uhci2: [ITHREAD]
                  uhci2: LegSup = 0x2f00
                  usbus2: <intel 82801g="" (ich7)="" usb="" controller="" usb-c="">on uhci2
                  uhci3: <intel 82801g="" (ich7)="" usb="" controller="" usb-d="">port 0xc400-0xc41f irq 16 at device 29.3 on pci0
                  uhci3: [ITHREAD]
                  uhci3: LegSup = 0x2f00
                  usbus3: <intel 82801g="" (ich7)="" usb="" controller="" usb-d="">on uhci3
                  ehci0: <intel 82801gb="" r="" (ich7)="" usb="" 2.0="" controller="">mem 0xfe9f7c00-0xfe9f7fff irq 23 at device 29.7 on pci0
                  ehci0: [ITHREAD]
                  usbus4: EHCI version 1.0
                  usbus4: <intel 82801gb="" r="" (ich7)="" usb="" 2.0="" controller="">on ehci0
                  pcib3: <acpi pci-pci="" bridge="">at device 30.0 on pci0
                  pci3: <acpi pci="" bus="">on pcib3
                  rl0: <realtek 10="" 8139="" 100basetx="">port 0xe800-0xe8ff mem 0xfebffc00-0xfebffcff irq 16 at device 1.0 on pci3
                  miibus1: <mii bus="">on rl0
                  rlphy1: <realtek internal="" media="" interface="">PHY 0 on miibus1
                  rlphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
                  rl0: [ITHREAD]
                  isab0: <pci-isa bridge="">at device 31.0 on pci0
                  isa0: <isa bus="">on isab0
                  atapci0: <intel ich7="" sata300="" controller="">port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.2 on pci0
                  ata0: <ata 0="" channel="">on atapci0
                  ata0: [ITHREAD]
                  ata1: <ata 1="" channel="">on atapci0
                  ata1: [ITHREAD]
                  pci0: <serial bus,="" smbus="">at device 31.3 (no driver attached)
                  acpi_button0: <power button="">on acpi0
                  atrtc0: <at realtime="" clock="">port 0x70-0x71 irq 8 on acpi0
                  uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
                  uart0: [FILTER]
                  uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
                  uart1: [FILTER]
                  ppc0: <parallel port="">port 0x378-0x37f irq 7 on acpi0
                  ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
                  ppc0: [ITHREAD]
                  ppbus0: <parallel port="" bus="">on ppc0
                  plip0: <plip network="" interface="">on ppbus0
                  plip0: [ITHREAD]
                  lpt0: <printer>on ppbus0
                  lpt0: [ITHREAD]
                  lpt0: Interrupt-driven port
                  ppi0: <parallel i="" o="">on ppbus0
                  atkbdc0: <keyboard controller="" (i8042)="">port 0x60,0x64 irq 1 on acpi0
                  atkbd0: <at keyboard="">irq 1 on atkbdc0
                  kbd0 at atkbd0
                  atkbd0: [GIANT-LOCKED]
                  atkbd0: [ITHREAD]
                  psm0: <ps 2="" mouse="">irq 12 on atkbdc0
                  psm0: [GIANT-LOCKED]
                  psm0: [ITHREAD]
                  psm0: model IntelliMouse, device ID 3
                  orm0: <isa option="" rom="">at iomem 0xc0000-0xcc7ff on isa0
                  sc0: <system console="">at flags 0x100 on isa0
                  sc0: VGA <16 virtual consoles, flags=0x300>
                  vga0: <generic isa="" vga="">at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
                  p4tcc0: <cpu frequency="" thermal="" control="">on cpu0
                  p4tcc1: <cpu frequency="" thermal="" control="">on cpu1
                  Timecounters tick every 1.000 msec
                  IPsec: Initialized Security Association Processing.
                  usbus0: 12Mbps Full Speed USB v1.0
                  usbus1: 12Mbps Full Speed USB v1.0
                  usbus2: 12Mbps Full Speed USB v1.0
                  usbus3: 12Mbps Full Speed USB v1.0
                  usbus4: 480Mbps High Speed USB v2.0
                  ad0: 152627MB <seagate st3160212as="" 3.aah="">at ata0-master UDMA100 SATA
                  ugen0.1: <intel>at usbus0
                  uhub0: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus0
                  ugen1.1: <intel>at usbus1
                  uhub1: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus1
                  ugen2.1: <intel>at usbus2
                  uhub2: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus2
                  ugen3.1: <intel>at usbus3
                  uhub3: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus3
                  ugen4.1: <intel>at usbus4
                  uhub4: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus4
                  uhub0: 2 ports with 2 removable, self powered
                  uhub1: 2 ports with 2 removable, self powered
                  uhub2: 2 ports with 2 removable, self powered
                  uhub3: 2 ports with 2 removable, self powered
                  uhub4: 8 ports with 8 removable, self powered
                  SMP: AP CPU #1 Launched!
                  Trying to mount root from ufs:/dev/ad0s1a
                  WARNING: / was not properly dismounted
                  WARNING: R/W mount of / denied.  Filesystem is not clean - run fsck
                  pflog0: promiscuous mode enabled
                  rl0: link state changed to UP

                  Fatal trap 9: general protection fault while in kernel mode
                  cpuid = 0; apic id = 00
                  instruction pointer = 0x20:0xffffffff8076010e
                  stack pointer        = 0x28:0xffffff802c05a810
                  frame pointer        = 0x28:0xffffff802c05a850
                  code segment = base 0x0, limit 0xfffff, type 0x1b
                  = DPL 0, pres 1, long 1, def32 0, gran 1
                  processor eflags = interrupt enabled, resume, IOPL = 0
                  current process = 12 (irq16: rl0 uhci3)
                  Copyright © 1992-2010 The FreeBSD Project.
                  Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
                  The Regents of the University of California. All rights reserved.
                  FreeBSD is a registered trademark of The FreeBSD Foundation.
                  FreeBSD 8.1-RELEASE-p4 #0: Tue Sep 13 17:04:54 EDT 2011
                     root@FreeBSD_8.0_pfSense_2.0-AMD64.snaps.pfsense.org:/usr/obj./usr/pfSensesrc/src/sys/pfSense_SMP.8 amd64
                  Timecounter "i8254" frequency 1193182 Hz quality 0
                  CPU: Intel(R) Xeon(TM) CPU 3.00GHz (3000.12-MHz K8-class CPU)
                   Origin = "GenuineIntel"  Id = 0xf41  Family = f  Model = 4  Stepping = 1
                   Features=0xbfebfbff <fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>Features2=0x641d <sse3,dtes64,mon,ds_cpl,cnxt-id,cx16,xtpr>AMD Features=0x20100800 <syscall,nx,lm>TSC: P-state invariant
                  real memory  = 2147483648 (2048 MB)
                  avail memory = 2015756288 (1922 MB)
                  ACPI APIC Table: <030811 APIC1634>
                  FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
                  FreeBSD/SMP: 1 package(s) x 1 core(s) x 2 HTT threads
                  cpu0 (BSP): APIC ID:  0
                  cpu1 (AP/HT): APIC ID:  1
                  ioapic0: Changing APIC ID to 2
                  ioapic0 <version 2.0="">irqs 0-23 on motherboard
                  netisr_init: forcing maxthreads to 1 and bindthreads to 0 for device polling
                  wlan: mac acl policy registered
                  ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
                  ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
                  module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff80470e30, 0) error 1
                  wpi: You need to read the LICENSE file in /usr/share/doc/legal/intel_wpi/.
                  wpi: If you agree with the license, set legal.intel_wpi.license_ack=1 in /boot/loader.conf.
                  module_register_init: MOD_LOAD (wpi_fw, 0xffffffff806548f0, 0) error 1
                  ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
                  ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
                  module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff80470cf0, 0) error 1
                  ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
                  ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
                  module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff80470d90, 0) error 1
                  kbd1 at kbdmux0
                  cryptosoft0: <software crypto="">on motherboard
                  padlock0: No ACE support.
                  acpi0: <030811 RSDT1634> on motherboard
                  acpi0: [ITHREAD]
                  acpi0: Power Button (fixed)
                  acpi0: reservation of 0, a0000 (3) failed
                  acpi0: reservation of 100000, 7dd00000 (3) failed
                  Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
                  acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
                  cpu0: <acpi cpu="">on acpi0
                  cpu1: <acpi cpu="">on acpi0
                  pcib0: <acpi host-pci="" bridge="">port 0xcf8-0xcff on acpi0
                  pci0: <acpi pci="" bus="">on pcib0
                  vgapci0: <vga-compatible display="">port 0xcc00-0xcc07 mem 0xfe400000-0xfe7fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0
                  agp0: <intel g41="" svga="" controller="">on vgapci0
                  agp0: detected 32764k stolen memory
                  agp0: aperture size is 256M
                  pci0: <multimedia, hda="">at device 27.0 (no driver attached)
                  pcib1: <acpi pci-pci="" bridge="">irq 16 at device 28.0 on pci0
                  pci1: <acpi pci="" bus="">on pcib1
                  pcib2: <acpi pci-pci="" bridge="">irq 18 at device 28.2 on pci0
                  pci2: <acpi pci="" bus="">on pcib2
                  re0: <realtek 10="" 8101e="" 8102e="" 8102el="" 8103e="" pcie="" 100basetx="">port 0xd800-0xd8ff mem 0xfdfff000-0xfdffffff,0xfdfe0000-0xfdfeffff irq 18 at device 0.0 on pci2
                  re0: Using 1 MSI messages
                  re0: Chip rev. 0x24800000
                  re0: MAC rev. 0x00400000
                  miibus0: <mii bus="">on re0
                  rlphy0: <rtl8201l 10="" 100="" media="" interface="">PHY 1 on miibus0
                  rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
                  re0: [FILTER]
                  uhci0: <intel 82801g="" (ich7)="" usb="" controller="" usb-a="">port 0xc880-0xc89f irq 23 at device 29.0 on pci0
                  uhci0: [ITHREAD]
                  uhci0: LegSup = 0x2f00
                  usbus0: <intel 82801g="" (ich7)="" usb="" controller="" usb-a="">on uhci0
                  uhci1: <intel 82801g="" (ich7)="" usb="" controller="" usb-b="">port 0xc800-0xc81f irq 19 at device 29.1 on pci0
                  uhci1: [ITHREAD]
                  uhci1: LegSup = 0x2f00
                  usbus1: <intel 82801g="" (ich7)="" usb="" controller="" usb-b="">on uhci1
                  uhci2: <intel 82801g="" (ich7)="" usb="" controller="" usb-c="">port 0xc480-0xc49f irq 18 at device 29.2 on pci0
                  uhci2: [ITHREAD]
                  uhci2: LegSup = 0x2f00
                  usbus2: <intel 82801g="" (ich7)="" usb="" controller="" usb-c="">on uhci2
                  uhci3: <intel 82801g="" (ich7)="" usb="" controller="" usb-d="">port 0xc400-0xc41f irq 16 at device 29.3 on pci0
                  uhci3: [ITHREAD]
                  uhci3: LegSup = 0x2f00
                  usbus3: <intel 82801g="" (ich7)="" usb="" controller="" usb-d="">on uhci3
                  ehci0: <intel 82801gb="" r="" (ich7)="" usb="" 2.0="" controller="">mem 0xfe9f7c00-0xfe9f7fff irq 23 at device 29.7 on pci0
                  ehci0: [ITHREAD]
                  usbus4: EHCI version 1.0
                  usbus4: <intel 82801gb="" r="" (ich7)="" usb="" 2.0="" controller="">on ehci0
                  pcib3: <acpi pci-pci="" bridge="">at device 30.0 on pci0
                  pci3: <acpi pci="" bus="">on pcib3
                  rl0: <realtek 10="" 8139="" 100basetx="">port 0xe800-0xe8ff mem 0xfebffc00-0xfebffcff irq 16 at device 1.0 on pci3
                  miibus1: <mii bus="">on rl0
                  rlphy1: <realtek internal="" media="" interface="">PHY 0 on miibus1
                  rlphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
                  rl0: [ITHREAD]
                  isab0: <pci-isa bridge="">at device 31.0 on pci0
                  isa0: <isa bus="">on isab0
                  atapci0: <intel ich7="" sata300="" controller="">port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.2 on pci0
                  ata0: <ata 0="" channel="">on atapci0
                  ata0: [ITHREAD]
                  ata1: <ata 1="" channel="">on atapci0
                  ata1: [ITHREAD]
                  pci0: <serial bus,="" smbus="">at device 31.3 (no driver attached)
                  acpi_button0: <power button="">on acpi0
                  atrtc0: <at realtime="" clock="">port 0x70-0x71 irq 8 on acpi0
                  uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
                  uart0: [FILTER]
                  uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
                  uart1: [FILTER]
                  ppc0: <parallel port="">port 0x378-0x37f irq 7 on acpi0
                  ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
                  ppc0: [ITHREAD]
                  ppbus0: <parallel port="" bus="">on ppc0
                  plip0: <plip network="" interface="">on ppbus0
                  plip0: [ITHREAD]
                  lpt0: <printer>on ppbus0
                  lpt0: [ITHREAD]
                  lpt0: Interrupt-driven port
                  ppi0: <parallel i="" o="">on ppbus0
                  atkbdc0: <keyboard controller="" (i8042)="">port 0x60,0x64 irq 1 on acpi0
                  atkbd0: <at keyboard="">irq 1 on atkbdc0
                  kbd0 at atkbd0
                  atkbd0: [GIANT-LOCKED]
                  atkbd0: [ITHREAD]
                  psm0: <ps 2="" mouse="">irq 12 on atkbdc0
                  psm0: [GIANT-LOCKED]
                  psm0: [ITHREAD]
                  psm0: model IntelliMouse, device ID 3
                  orm0: <isa option="" rom="">at iomem 0xc0000-0xcc7ff on isa0
                  sc0: <system console="">at flags 0x100 on isa0
                  sc0: VGA <16 virtual consoles, flags=0x300>
                  vga0: <generic isa="" vga="">at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
                  p4tcc0: <cpu frequency="" thermal="" control="">on cpu0
                  p4tcc1: <cpu frequency="" thermal="" control="">on cpu1
                  Timecounters tick every 1.000 msec
                  IPsec: Initialized Security Association Processing.
                  usbus0: 12Mbps Full Speed USB v1.0
                  usbus1: 12Mbps Full Speed USB v1.0
                  usbus2: 12Mbps Full Speed USB v1.0
                  usbus3: 12Mbps Full Speed USB v1.0
                  usbus4: 480Mbps High Speed USB v2.0
                  ad0: 152627MB <seagate st3160212as="" 3.aah="">at ata0-master UDMA100 SATA
                  ugen0.1: <intel>at usbus0
                  uhub0: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus0
                  ugen1.1: <intel>at usbus1
                  uhub1: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus1
                  ugen2.1: <intel>at usbus2
                  uhub2: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus2
                  ugen3.1: <intel>at usbus3
                  uhub3: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus3
                  ugen4.1: <intel>at usbus4
                  uhub4: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus4
                  uhub0: 2 ports with 2 removable, self powered
                  uhub1: 2 ports with 2 removable, self powered
                  uhub2: 2 ports with 2 removable, self powered
                  uhub3: 2 ports with 2 removable, self powered
                  uhub4: 8 ports with 8 removable, self powered
                  SMP: AP CPU #1 Launched!
                  Trying to mount root from ufs:/dev/ad0s1a
                  WARNING: / was not properly dismounted
                  WARNING: R/W mount of / denied.  Filesystem is not clean - run fsck
                  pflog0: promiscuous mode enabled
                  rl0: link state changed to UP
                  pid 53302 (squid), uid 62: exited on signal 6</intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></seagate></cpu></cpu></generic></system></isa></ps></at></keyboard></parallel></printer></plip></parallel></parallel></at></power></serial></ata></ata></intel></isa></pci-isa></realtek></mii></realtek></acpi></acpi></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></rtl8201l></mii></realtek></acpi></acpi></acpi></acpi></multimedia,></intel></vga-compatible></acpi></acpi></acpi></acpi></software></version></syscall,nx,lm></sse3,dtes64,mon,ds_cpl,cnxt-id,cx16,xtpr></fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></seagate></cpu></cpu></generic></system></isa></ps></at></keyboard></parallel></printer></plip></parallel></parallel></at></power></serial></ata></ata></intel></isa></pci-isa></realtek></mii></realtek></acpi></acpi></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></rtl8201l></mii></realtek></acpi></acpi></acpi></acpi></multimedia,></intel></vga-compatible></acpi></acpi></acpi></acpi></software></version></syscall,nx,lm></sse3,dtes64,mon,ds_cpl,cnxt-id,cx16,xtpr></fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></seagate></cpu></cpu></generic></system></isa></ps></at></keyboard></parallel></printer></plip></parallel></parallel></at></power></serial></ata></ata></intel></isa></pci-isa></realtek></mii></realtek></acpi></acpi></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></rtl8201l></mii></realtek></acpi></acpi></acpi></acpi></multimedia,></intel></vga-compatible></acpi></acpi></acpi></acpi></software></version></syscall,nx,lm></sse3,dtes64,mon,ds_cpl,cnxt-id,cx16,xtpr></fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></seagate></cpu></cpu></generic></system></isa></ps></at></keyboard></parallel></printer></plip></parallel></parallel></at></power></serial></ata></ata></intel></isa></pci-isa></realtek></mii></realtek></acpi></acpi></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></rtl8201l></mii></realtek></acpi></acpi></acpi></acpi></multimedia,></intel></vga-compatible></acpi></acpi></acpi></acpi></software></version></syscall,nx,lm></sse3,dtes64,mon,ds_cpl,cnxt-id,cx16,xtpr></fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>

                  1 Reply Last reply Reply Quote 0
                  • K
                    kaptenhook
                    last edited by

                    @kingcell:

                    @kingcell:

                    nyoba pfsense 2.0 release? amd64, install luscanya kok error ya? apa temen2 disini ngalamin seperti saya ya?

                    keteranganya seperti ini…..................?

                    Installation of lusca-cache FAILED!

                    Beginning package installation for lusca-cache...
                    Downloading package configuration file... done.
                    Saving updated package information... done.
                    Downloading lusca-cache and its dependencies...
                    Checking for package installation...
                    Downloading http://sites.google.com/site/chudyfernandez/8/amd64/squid_radius_auth-1.10.tbz ...  could not download from there or http://ftp2.FreeBSD.org/pub/FreeBSD/ports/amd64/packages-8.1-release/All/squid_radius_auth-1.10.tbz.
                    of squid_radius_auth-1.10 failed!

                    Installation aborted.Backing up libraries...
                    Removing package...
                    Starting package deletion for lusca-cache-r14850...done.
                    Starting package deletion for perl-5.10...done.
                    Starting package deletion for squid_radius_auth-1.10...done.
                    Starting package deletion for libwww-5.4.0_4...done.
                    Removing lusca-cache components...
                    Tabs items... done.
                    Menu items... done.
                    Services... done.
                    Loading package instructions...
                    Include file squid.inc could not be found for inclusion.
                    Deinstall commands...
                    Not executing custom deinstall hook because an include is missing.
                    Removing package instructions...done.
                    Auxiliary files... done.
                    Package XML... done.
                    Configuration... done.
                    Cleaning up... Failed to install package.

                    Installation halted.

                    dicuba lagi hari ini, tadi pagi saya buat mesin baru x64 beserta luscanya juga ga ada masalah di versi release, mungkin waktu itu ada maintenance server kali yak>>>>>…...........

                    1 Reply Last reply Reply Quote 0
                    • P
                      pfz
                      last edited by

                      @ om abnis

                      fatal trap di situ kemungkinan disebabkan krna. ../dismount…

                      MB gk bsa baca hardisk dgn sempurna.
                      penyebabnya
                      -bsa karena kabel HD.
                      -bsa juga krn Hd nya uji coba nya pasang ke Cpu  lain klo jaln HD artinya bagus.

                      • bsa jg krn ada komponwn di MB nya sendiri ada yg error.
                        Kalo Prosesornya kayaknya masih bagus tuh.

                      namanya jg kira2 eh kalo gk pass yg di per sori.. namanya jg masih belajar...

                      :)

                      1 Reply Last reply Reply Quote 0
                      • K
                        kingcell
                        last edited by

                        dicuba lagi hari ini, tadi pagi saya buat mesin baru x64 beserta luscanya juga ga ada masalah di versi release, mungkin waktu itu ada maintenance server kali yak>>>>>…...........

                        ok om? makasih infonya, mau tak coba lagi install pfsense 2.0 release, amd64…............?  ::)

                        1 Reply Last reply Reply Quote 0
                        • First post
                          Last post
                        Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.