(Solved) OpenVPN + pfSense 2.0 RC3 + Debian Client

spinoza

Hi, how are you?

I configured OpenVPN on pfSense 2.0 RC3.

I can connect to the vpn, but I have no communication with the LAN.

Client's log:

openvpn --config calcar.conf 
Thu Jun 30 12:00:10 2011 OpenVPN 2.2.0 i486-linux-gnu [SSL] [LZO2] [EPOLL] [PKCS11] [eurephia] [MH] [PF_INET6] [IPv6 payload 20110424-2 (2.2RC2)] built on Jun 16 2011
Thu Jun 30 12:00:10 2011 WARNING: No server certificate verification method has been enabled.  See http://openvpn.net/howto.html#mitm for more info.
Thu Jun 30 12:00:10 2011 NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables
Thu Jun 30 12:00:10 2011 LZO compression initialized
Thu Jun 30 12:00:10 2011 Control Channel MTU parms [ L:1542 D:138 EF:38 EB:0 ET:0 EL:0 ]
Thu Jun 30 12:00:10 2011 Socket Buffers: R=[114688->131072] S=[114688->131072]
Thu Jun 30 12:00:10 2011 Data Channel MTU parms [ L:1542 D:1450 EF:42 EB:135 ET:0 EL:0 AF:3/1 ]
Thu Jun 30 12:00:10 2011 Local Options hash (VER=V4): '41690919'
Thu Jun 30 12:00:10 2011 Expected Remote Options hash (VER=V4): '530fdded'
Thu Jun 30 12:00:10 2011 UDPv4 link local: [undef]
Thu Jun 30 12:00:10 2011 UDPv4 link remote: [AF_INET]190.xx.xx.24:1194
Thu Jun 30 12:00:10 2011 TLS: Initial packet from [AF_INET]190.xx.xx.24:1194, sid=1e5a7cb0 183e966f
Thu Jun 30 12:00:11 2011 VERIFY OK: depth=1, /C=CO/ST=ANTIOQUIA/L=MEDELLIN/O=CALCAR/CN=CALCAR_CA/emailAddress=pfsense@local
Thu Jun 30 12:00:11 2011 VERIFY OK: depth=0, /C=CO/ST=ANTIOQUIA/L=MEDELLIN/O=CALCAR/CN=server/emailAddress=pfsense@local
Thu Jun 30 12:00:11 2011 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key
Thu Jun 30 12:00:11 2011 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication
Thu Jun 30 12:00:11 2011 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key
Thu Jun 30 12:00:11 2011 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication
Thu Jun 30 12:00:11 2011 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA
Thu Jun 30 12:00:11 2011 [server] Peer Connection Initiated with [AF_INET]190.xx.xx.24:1194
Thu Jun 30 12:00:13 2011 SENT CONTROL [server]: 'PUSH_REQUEST' (status=1)
Thu Jun 30 12:00:13 2011 PUSH: Received control message: 'PUSH_REPLY,route 192.168.16.0 255.255.255.0,route 10.0.8.1,topology net30,ping 10,ping-restart 60,ifconfig 10.0.8.6 10.0.8.5'
Thu Jun 30 12:00:13 2011 OPTIONS IMPORT: timers and/or timeouts modified
Thu Jun 30 12:00:13 2011 OPTIONS IMPORT: --ifconfig/up options modified
Thu Jun 30 12:00:13 2011 OPTIONS IMPORT: route options modified
Thu Jun 30 12:00:13 2011 ROUTE default_gateway=192.168.1.1
Thu Jun 30 12:00:13 2011 TUN/TAP device tun0 opened
Thu Jun 30 12:00:13 2011 TUN/TAP TX queue length set to 100
Thu Jun 30 12:00:13 2011 do_ifconfig, tt->ipv6=0, tt->did_ifconfig_ipv6_setup=0
Thu Jun 30 12:00:13 2011 /sbin/ifconfig tun0 10.0.8.6 pointopoint 10.0.8.5 mtu 1500
Thu Jun 30 12:00:13 2011 /sbin/route add -net 192.168.16.0 netmask 255.255.255.0 gw 10.0.8.5
Thu Jun 30 12:00:13 2011 /sbin/route add -net 10.0.8.1 netmask 255.255.255.255 gw 10.0.8.5
Thu Jun 30 12:00:13 2011 Initialization Sequence Completed

ping 192.168.16.2
PING 192.168.16.2 (192.168.16.2) 56(84) bytes of data.
^C
--- 192.168.16.2 ping statistics ---
25 packets transmitted, 0 received, 100% packet loss, time 24190ms

sudo route -n
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
0.0.0.0         192.168.1.1     0.0.0.0         UG    0      0        0 wlan0
10.0.8.1        10.0.8.5        255.255.255.255 UGH   0      0        0 tun0
10.0.8.5        0.0.0.0         255.255.255.255 UH    0      0        0 tun0
192.168.1.0     0.0.0.0         255.255.255.0   U     2      0        0 wlan0
192.168.16.0    10.0.8.5        255.255.255.0   UG    0      0        0 tun0

I do not know what the problem is.

Thanks for your help.

Metu69salemi

What solved this one?