Huawai E1750 PFsense2.0-RC3 The modem responded with "ERROR"…

ren22

hello

i try since days to get any of an UMTS modem working under pfsense 2.0 without success
i am using at least the huawai E1750 what is support by pfsense 2.0 but i cant get the UMTS modem get to work
the error messages from the logs/ppp says this :

Jul 30 14:51:34 ppp: [opt1_link0] LCP: Down event
Jul 30 14:51:34 ppp: [opt1_link0] Link: DOWN event
Jul 30 14:51:34 ppp: [opt1_link0] MODEM: chat script failed
Jul 30 14:51:34 ppp: [opt1_link0] chat: The modem responded with "ERROR" to the command "AT+CGDCONT=1,"IP","data.otelo.de"" at ModemCmd: label.
Jul 30 14:51:34 ppp: [opt1_link0] chat: Detected Hayes compatible modem.
Jul 30 14:51:33 ppp: [opt1_link0] Link: reconnection attempt 225

dmesg says this :
ugen4.2: <huawei technology="">at usbus4
u3g0: <huawei 0="" 2="" technology="" huawei="" mobile,="" class="" 0,="" rev="" 2.00="" 0.00,="" addr="">on usb us4
u3g0: Found 4 ports.
umass0: <huawei 0="" 2="" technology="" huawei="" mobile,="" class="" 0,="" rev="" 2.00="" 0.00,="" addr="">on u sbus4
umass1: <huawei 0="" 2="" technology="" huawei="" mobile,="" class="" 0,="" rev="" 2.00="" 0.00,="" addr="">on u sbus4
(probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI status: Check Condition
(probe0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
cd0 at umass-sim0 bus 0 scbus0 target 0 lun 0
cd0: <huawei mass="" storage="" 2.31="">Removable CD-ROM SCSI-2 device
cd0: 40.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
(probe0:umass-sim1:1:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:umass-sim1:1:0:0): CAM status: SCSI Status Error
(probe0:umass-sim1:1:0:0): SCSI status: Check Condition
(probe0:umass-sim1:1:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
da0 at umass-sim1 bus 1 scbus1 target 0 lun 0
da0: <huawei sd="" storage="" 2.31="">Removable Direct Access SCSI-2 device
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
pflog0: promiscuous mode enabled
ng0: changing name to 'ppp0'

ls /dev/cu*
/dev/cuau0 /dev/cuau0.lock /dev/cuau1.init
/dev/cuau0.init /dev/cuau1 /dev/cuau1.lock

and usbconfig

usbconfig -d ugen4.2 dump_device_desc
ugen4.2: <huawei mobile="" huawei="" technology="">at usbus4, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON

bLength = 0x0012
bDescriptorType = 0x0001
bcdUSB = 0x0200
bDeviceClass = 0x0000
bDeviceSubClass = 0x0000
bDeviceProtocol = 0x0000
bMaxPacketSize0 = 0x0040
idVendor = 0x12d1
idProduct = 0x140c
bcdDevice = 0x0000
iManufacturer = 0x0003 <huawei technology="">iProduct = 0x0002 <huawei mobile="">iSerialNumber = 0x0000 <no string="">bNumConfigurations = 0x0001

hope someone can help me</no></huawei></huawei></huawei></huawei></huawei></huawei></huawei></huawei></huawei>

ren22

hhhm really confusing me …

i removed the sim pin from the simcard with my mobilephone, after that, i replugged the simcard to the o2 zte huawai e1750 modem, and now i am connected successfully ... thats a f**** error message .... damn that took days xD

best regards