Couldn't go to web gui of Sense

haluong

Hi all,

I installed pfSense in the VMWare. In the screen, it displays
"Welcome to pfSense 1.2.3-RELEASE-pfSense"
LAN* -> le0 -> 192.168.1.1
WAN* -> le1 -> 10.0.28.177 (DHCP)
I can't access http://192.168.1.1 from another PC to configure. Could you please help me?

Thanks,
Ha

Metu69salemi

how is your virtual interfaces setup?
try with wan address

waqasalisha

on virtual pc these are default setting
em0 is Wan
em1 is Lan

try this i hope your problem is solve.

mikeg

Your pfSense is running as a virtual machine (VM). You can access it from another VM running on the same host, if you have them share an internal network (192.168.1.0/24). Or you can probably configure the LAN port on the pfSense VM to connect to the host. In VirtualBox, that's the "host-only adapter" option in network adapters setup.

jimp

Alternately, from the console shell, run:

pfSsh.php playback enableallowallwan

And then get in from the WAN side. Before you do anything else, setup a proper WAN rule to let you and only you into the GUI from WAN, and then remove the allow all rule that the above command added.