Block alias in rule
can someone explain how to block an Alias in firewall rules?
create blocking rule with that alias.
Seriously talking: what kind of alias you have?
HI, i kind of figure it out i think but it doesnt do the job!!
trying to block the https from facebook and i did like on the pix attached but it doesnt work. any idea?
your rule is blocking anything between 80-443
in what interface this rule is added
i'm using pfsense to filter some of the computers of the school where i'm working at. This rule is added in "school proxy filter" (that i created) as i want only certain computers to be filtered.
yes but in what interface this rule is applied?
here's a screenshot. does it help?
![Screen shot 2011-09-08 at 4.55.49 PM.png](/public/imported_attachments/1/Screen shot 2011-09-08 at 4.55.49 PM.png)
![Screen shot 2011-09-08 at 4.55.49 PM.png_thumb](/public/imported_attachments/1/Screen shot 2011-09-08 at 4.55.49 PM.png_thumb)
If the proxyinterface itself is the same as lan subnet, then it should work
well, it doesnt. here's my interface setup scrennshot.
![Billede 1.png_thumb](/public/imported_attachments/1/Billede 1.png_thumb)
![Billede 1.png](/public/imported_attachments/1/Billede 1.png)
rules work on ingress
So the rules must be implemented to that interface where you want it to work and must have same subnet as source
I think I'm starting to get it. I (think) made the proper changes. cannot try it now, i'll be at work first tomorrow afternoon. check the pix, what do you think?
thx a lot.
![Screen shot 2011-09-08 at 9.49.07 PM.png](/public/imported_attachments/1/Screen shot 2011-09-08 at 9.49.07 PM.png)
![Screen shot 2011-09-08 at 9.49.07 PM.png_thumb](/public/imported_attachments/1/Screen shot 2011-09-08 at 9.49.07 PM.png_thumb)
Looks ok, but you're still blocking everything between 80 and 443
that's right, made the change, let see if it works. thx again.
it does work now, thank you very much, i really appreciate.