{Complete} Timebased Rules

heiko · Mar 28, 2007, 7:47 PM

Hello Scott,
i think otherwise it is a liite bit confusing without the description. Thanks a lot for the great work.
I am tranquilized, when i stay in russia with my firewalls…...
Greetings
heiko

yoda715 · Mar 28, 2007, 8:35 PM

@heiko:

Problem: a couple days brings "grimbelfixe" to the description, when you edit and save a second time

Problem: when you stay in the schedule maks and have more than one configured range, and you want to edit one, click this and click a second also without saving the first one, uups, then the logic is a little bit confused the a first range disappeared.

~~I can't duplicate this. Try updating to the latest snapshot in two hours and re test. If you can get the error again, please list what steps you went through to achieve this. Thanks.~~
I've duplicated it. Will fix shortly.

sullrich · Mar 28, 2007, 8:58 PM

I commited changes to reload the rules on 0,15,30,45. Please test the next snapshot in about 1-2 hours.

heiko · Mar 28, 2007, 9:04 PM

i will test it, give me a day..

yoda715 · Mar 28, 2007, 9:15 PM

Monday is also first now. Previous bugs should be fixed now.

sullrich · Mar 28, 2007, 9:16 PM

All known issues should be resolved. Please test and outline any remaining issues.

yoda715 · Mar 29, 2007, 12:36 AM

@sullrich:

All known issues should be resolved. Please test and outline any remaining issues.

There are a few more logic checks I will implement tomorrow, but the functionality is working.

yoda715 · Mar 29, 2007, 6:40 PM

2 More bugs:
Cron was not reloading rules. Now solved.
Using the 'Not' operator in a rule causes it to not load the schedule. For now do not use 'Not' operators in your firewall rules along with a schedule. Now solved.

Update to the latest snapshot in an hour and test it out please.

Also please note that due to reworking the gui to display Monday first, you need to recreate all schedules and save them out.

BuddhaChu · Mar 29, 2007, 11:11 AM

Looks like you guys fixed something before I noticed it was going on with the 2 builds I loaded yesterday. Snort was being restarted every 15 minutes whenever the rules were being reloaded. I loaded up the "Thu Mar 29 04:14:59 EDT" build this morning and it looks like you got that sorted. Thanx!

Notice the processor spiking every 15 min has ceased in the attached pic.

Heiko: Thank you for sponsoring this addition to pfSense!

heiko · Mar 29, 2007, 11:24 AM

BuddhaChu: Don't mention it!

heiko · Mar 29, 2007, 2:57 PM

Hello Guys,

a few things:

1.) how it works when schedules with time overlaps exists?

2.) a line break also in the configured range would be helpful –> Screenshot

3.) The Description of the "schedule name" is not right, "-;_" kicks me out when i fill this in..

4.) I think the description could be a duty field - Screenshot

5.) "Grimbelfix" when edit/save/edit is OK - it runs

6.) Upps, when i edit a saved schedule and change the name for example from "test123" to "test12345", all rules with the schedule "test123" are not switching to "test12345" but to "none" -- intended ???

7.) it would be fine, when the console menü receives a number with, for example, "deleting all schedules on rule", maybe,maybe

8.) how is the actual condition of cron, timedelay between reloading?

9.) The "schedule name" field is very long, so look at the screenshot, maybe a little bit shorter, a field definition would be good.

10.) Screenshot ; edit a saved range without saving the changes, edit then the next range, so the first one is down the drain, it would be better, i think, when only one range at a time can be modified.

11.) Another problem i think --> see Screenshot ssh.jpg- I have to created a blocking rule like ssh at the top. Without a rule schedule it works fine. Now i create a time range - today 16:45 - to 17:00 -. The time is 16:20 when i put the schedule to the rule. Saved, but nothing happens... On 16:40 i cannot established a ssh session. The Blocking rule i think is only active betwen the timerange, so the default lan rule is active, but i can´t access. The webgui anti-lockout checkbox is active. The "not" operator are not used in this rule.

Can you duplicated this behaviour.

Great work, "Scott´s".

I not known, which timebased-rule-system is better than pfsense´s....., no one, i think

Greetings
heiko

![blocking rule_ssh.jpg](/public/imported_attachments/1/blocking rule_ssh.jpg)
![blocking rule_ssh.jpg_thumb](/public/imported_attachments/1/blocking rule_ssh.jpg_thumb)

yoda715 · Mar 29, 2007, 8:13 PM

@heiko:

1.) how it works when schedules with time overlaps exists?

Every 15 minutes all schedules are re-evaluated. If two schedules overlap it should work continuously and not disturb each other.

@heiko:

2.) a line break also in the configured range would be helpful –> Screenshot

I'm working on this

@heiko:

3.) The Description of the "schedule name" is not right, "-;_" kicks me out when i fill this in..

This has been corrected. Valid names are a-z, A-Z and 0-9

@heiko:

4.) I think the description could be a duty field - Screenshot

Duty field? Can you describe this in more detail? How is this different than what is already there?

@heiko:

5.) "Grimbelfix" when edit/save/edit is OK - it runs

Good to hear :)

@heiko:

6.) Upps, when i edit a saved schedule and change the name for example from "test123" to "test12345", all rules with the schedule "test123" are not switching to "test12345" but to "none" – intended ???

Oops. Fixed.

@heiko:

7.) it would be fine, when the console menü receives a number with, for example, "deleting all schedules on rule", maybe,maybe

Can you elaborate some more on this?

@heiko:

8.) how is the actual condition of cron, timedelay between reloading?

Time delay should be around 30 secs at most, depending on the speed and load of your pfsense box.

@heiko:

9.) The "schedule name" field is very long, so look at the screenshot, maybe a little bit shorter, a field definition would be good.

Fixed.

@heiko:

10.) Screenshot ; edit a saved range without saving the changes, edit then the next range, so the first one is down the drain, it would be better, i think, when only one range at a time can be modified.

Oops, thought I did this already. Done

@heiko:

11.) Another problem i think –> see Screenshot ssh.jpg- I have to created a blocking rule like ssh at the top. Without a rule schedule it works fine. Now i create a time range - today 16:45 - to 17:00 -. The time is 16:20 when i put the schedule to the rule. Saved, but nothing happens... On 16:40 i cannot established a ssh session. The Blocking rule i think is only active betwen the timerange, so the default lan rule is active, but i can´t access. The webgui anti-lockout checkbox is active. The "not" operator are not used in this rule.

Update to the latest snapshot in 2 hours. This should be fixed. Retest and let us know.

@heiko:

I not known, which timebased-rule-system is better than pfsense´s….., no one, i think

I think its fair to say We have the best schedule system now :)

heiko · Mar 29, 2007, 9:44 PM

Ok, i will test the next snapshot, but tommorow…..

1.) 7.) it would be fine, when the console menü receives a number with, for example, "deleting all schedules on rule", maybe,maybe

Can you elaborate some more on this?

i think, with a complex time based rulesystem, i can kick me out…., then i can reset all with the console menue, but this is not very comfortable, so i must reset , config restore and other things. A very big time lost...

I think, a number with the code behind " delete all schedules on rules" brings all rules up and i needn´t a restore or anything would be helpful.

Do you have a better proposal?

2.) I think the description could be a duty field - Screenshot

Duty field? Can you describe this in more detail? How is this different than what is already there?

At the Moment it doesn´t a duty field or my test was not right…., when you coded a duty field with a line break, i can already set a "speaking" description to that field. Then i can see directly what the admin means with this schedule.
Also, do you have a better proposal? I´m up for it!

I will test the other points in the morning, and post the outcomes….

Thank you very much!
Heiko

hoba · Mar 30, 2007, 6:09 AM

@heiko:

2.) I think the description could be a duty field - Screenshot
Duty field? Can you describe this in more detail? How is this different than what is already there?
At the Moment it doesn´t a duty field or my test was not right…., when you coded a duty field with a line break, i can already set a "speaking" description to that field. Then i can see directly what the admin means with this schedule.
Also, do you have a better proposal? I´m up for it!

He means it is a required field, so that you can't save the page with nothing filled in there. He wants to always see a description in the schedules overview for better readability/understanding what this schedule does or is intended for.

heiko · Mar 30, 2007, 7:00 AM

Vielen Dank für die Übersetzung, Holger!
Thanks for the translation, Holger!

yoda715 · Mar 30, 2007, 9:54 AM

@hoba:

@heiko:

2.) I think the description could be a duty field - Screenshot
Duty field? Can you describe this in more detail? How is this different than what is already there?
At the Moment it doesn´t a duty field or my test was not right…., when you coded a duty field with a line break, i can already set a "speaking" description to that field. Then i can see directly what the admin means with this schedule.
Also, do you have a better proposal? I´m up for it!

He means it is a required field, so that you can't save the page with nothing filled in there. He wants to always see a description in the schedules overview for better readability/understanding what this schedule does or is intended for.

Hmm, I don't particularly like making something required that isn't really necessary for the schedule to function. In my opinion making that field a requirement would be annoying.

heiko · Mar 30, 2007, 10:46 AM

Hello Scott,
i don´t think so…., but it is not really fundamental, so you must not change this field!!

At the Moment i cannot test the build, because i think the snapshot server is down?
Greetings
Heiko

heiko · Mar 30, 2007, 6:02 PM

Hello,
i need the snapshot server to test the build, then we will see if the project is finished.
Greetings
heiko

sullrich · Mar 30, 2007, 6:20 PM

Server is down, we're working on it.

heiko · Mar 30, 2007, 6:26 PM

I´m waiting and waiting, so i can test snort….. ;D