Problem setting WAN gateway



  • Ive got a 2.0 nano install and have noticed a webGUI problem and wondering if there is a workaround?  The issue is when I try to set the gateway for the WAN interface using the webGUI "add gateway".  after entering the IP, description, etc and clicking the "Save Gateway" button the webGUI just sits there with the little swirly icon and "one moment please" (I've left it as long as 10 hours).  The webGUI on a whole still functions, however if I go away from the WAN interface screen and back no gateway has been added.  If I use the setup wizard to add the gateway it works fine.  Any Ideas?  Could it be related to my hardware?  I'm using Watchguard x750e 's with the 4GB nano image.



  • You said: The issue is when I try to set the gateway for the WAN interface using the webGUI "add gateway"

    I do not understand that part.

    As soon as a WAN interface is set up (Interface => Assign) and it's UP (Status=> Interfaces) it will be listed in Status => Gateway.

    I'm not able to add a gateway using Interfaces => WAN - WAN is a gateway.

    Btw: I have only one WAN interface, do you have more then one ?


Log in to reply