NEW Package: freeRADIUS 2.x

Nachtfalke

Updates: pkg 1.3.5

Added some info about dis-/advantages of pfsense cert-manager compared to freeradius-cert editor. pfsense cert-manager should be the first manager to use!
freeradius server is starting with certs and keys (different typs) from pfsense built-in manager but this needs more testing with clients and real NAS
Some small typo fixes in freeradiuseapconf.xml with double entry
Added some checks and renamings on client cert building script (Thanks to marcelloc)

Nachtfalke

Updates: pkg v1.3.6

Added ability to choose between the freeradius cert manager or the pfsense built-in cert manager. (Thank you very much jimp and sullrich)

Nachtfalke

Updates: pkg v1.3.7

Corrected starting parameters of variables for "Settings"
Enabled logging and logging to syslog is now default
DH and RANDOM file will be created new when changing to "pfsense cert-manager". So not everybody will use the same files delivered with the freeradius package.
Adding Custom-Options on TOP and BOTTOM of all other user options
New variables and structur of the "users"-file creation. It was neccessary to add additional custom options on TOP and BOTTOM. User entries from older freeradius2 versions are NOT compatible. You need to add them again. Sorry.
Username can now contain whitespaces
Added Copyright
Added new features to dis-/enable SQL (Instantiate, authorize, accounting, session, post-auth) - we still need to build freeradius2 package with additional modules.

Nachtfalke

Updates: pkg v1.3.8

fixed empty password after installation in default cert (eap)
fixed typo in description (eap)
small change in <custom_php_install_commands>order in freeradius.xml</custom_php_install_commands>
Added radiusd.conf to "view config" tab
fixed "include sql.conf" in (sql/radiusd)
Added some comments in freeradius.inc

sandern

If its not much work to implement, beside user authentication, it would be nice to also support mac authentication. (http://wiki.freeradius.org/Mac-Auth)

Nice work so far!

Nachtfalke

@sandern:

If its not much work to implement, beside user authentication, it would be nice to also support mac authentication. (http://wiki.freeradius.org/Mac-Auth)

Nice work so far!

This should work by default as far as I know for now. The CISCO SG300-28 switch for example is sending the MAC address in username and password, all small letters without whitespace.
So you take a look on the user's guide and check the format the MAC address is sent.

If the PCs MAC address is for example:
00:11:AA:BC:DE:FF

Than the username and password in freeradius users should be:
0011aabcdeff

The users file should look like this afterwards:


"0011aabcdeff" Cleartext-Password := "0011aabcdeff"
                       Simultaneous-Use := 1

Please post back if you could try this and if it is working or not.
I am on vacation until 09 january 2012 and do not have the chance to test this all on a real switch and environment.
This is on my "todo" list - to check all features I added just from How-To's in real ;-)

–-- edit ----
This is from the CISCO users guide:

The authentication methods can be:
• 802.1x—The switch supports the authentication mechanism as described in
the standard to authenticate and authorize 802.1x supplicants.

• MAC-based—The switch can be configured to use this mode to
authenticate and authorized devices that do not support 802.1x. The switch
emulates the supplicant role on behalf of the non 802.1x capable devices,
and uses the MAC address of the devices as the username and password
when communicating with the RADIUS servers. MAC addresses for
username and password must be entered in lower case and with no
delimiting characters (for example: aaccbb55ccff). To use MAC-based
authentication at a port:

Nachtfalke

Updates: pkg v1.3.9

small changes in if/else syntax (freeradius.inc)
deleted uneccessary <custom_php_resync_config_command>entries (freeradiuscerts.xml)</custom_php_resync_config_command>
fixed some typos in description and titel (eap, view config)
cosmetic fix: changed order of columns (users)
added XMLRPC Sync for syncing "users" and "NAS / clients" with other hosts. No other parts of freeradius2 config will be synced. The XMLRPC code I use isn't optimized for syncing so much parts like I use them in my package. Syncing more parts will increase the reload time after any change because there are so much dependencies and reloads neccessary.

Special thanks goes to: marcelloc :D
Thank you for allowing me to use the pfblocker-xmlrpc code :)

Nachtfalke

Updates: pkg v1.4.0

improved first start of freeradius service after package installation
fixed double restart of freeradius service (sql)
added some additional output in syslog when creating certs with freeRADIUS Cert-Manager (certs)
added some additional output in syslog when changing TO pfSense Cert-Manager (eap)
added some comments in freeradius.inc for better understanding

Nachtfalke

Updates: pkg v1.4.1

enabled: module "attr_filter" in "pre-proxy" and "post-proxy" section
enabled: module "counter" (daily, weekly, monthly, forever) in "authorize" and "accounting" section
enabled: module "checkval" in "authorize" section
enabled: "with_ntdomain_hack = yes" in module "realm", module "mschap" and virtual-server "default"
enabled: use of more than one realm at one time in module "realm"
fixed: "users" file. we need to handel "check-items" different from "reply-items" (users)
added: support for Microsoft Statement-of-Health (SoH), which is a form of network access protection present in Windows XP SP3, Vista and 7. Enabled virtual-server "soh". (eap)

Nachtfalke

Updates: pkg v1.4.2

Added/Modified: Additional custom options for CHECK-ITEMs and REPLY-ITEMs (users)
fixed: typos in descriptions (users,settings,clients)

There is now a wiki about freeradius2 in the pfSense docs. You are welcome to contribute!
http://doc.pfsense.org/index.php/FreeRADIUS_2.x_package

marcelloc

I saw some features not compiled for it like:

ActiveDirectory
LDAP
SQL

Do you need help on trying to compile it and find a <build_options>for pkg_config ?</build_options>

Nachtfalke

@marcelloc:

I saw some features not compiled for it like:

ActiveDirectory

LDAP

SQL

Do you need help on trying to compile it and find a <build_options>for pkg_config ?</build_options>

Hi,

yes there are features which are not compiled yet. I posted on dev-mailinglist last year with the build options I need.
Take a look here:
http://lists.pfsense.org/pipermail/dev/2011-December/000100.html


WITH_KERBEROS=yes (I need this for ActiveDirectory I think + samba)
WITH_LDAP=yes
WITH_MYSQL=yes
WITH PGSQL=yes
WITH_EXPERIMENTAL=yes
WITH_PERL=yes (on by default)
WITH_PYTHON=yes (on by default)
WITHOUT_USER=yes (I do not want to chroot and so this feature makes no sense)

I talked with mdima and he pointed me to the ports and the available build options I posted on dev-list.

If you could help it would be great, of course :-)

marcelloc

there is a field in pkg_info for compile options:


.
.
.
<build_port_path>/usr/ports/mail/postfix</build_port_path>
<build_options>WITH_PCRE=true WITH_SPF=true WITH_SASL2=true WITH_TLS=true</build_options>

The best way before editing pkg_config is:

build a virtual machine with freebsd 8.1
update freebsd to get current version using freebsd-update
fetch ports with portsnap fetch && portsnap extract
build freeradius with selected options
make freeradius and dependecies packages
install this package on pfsense(lab)
If nothing is break after that, include <build_options>to pkg_config</build_options>

Not that simple but not that hard. ;)

I'll compile freeradius with these options and feedback.

Nachtfalke

What should I place in:

<depends_on_package_base_url></depends_on_package_base_url>

I builded freeradius2 from ports with my actual PC-BSD 8.2 but just installed it on PC-BSD vm.
What is the command for:
make freeradius and dependecies packages
so that I can copy the package to pfsense and install/extract it there?

And for "pkg_config.8.xml.amd64" and "pkg_config.8.xml" I though I would be the best if I temporarily create a second entry - but I first have to do the steps before :D

PS: Building with custom build options - is this done by someone of the pfsense team or automaticly by the system ?

Thanks for your help! :D

marcelloc

@Nachtfalke:

What should I place in:

<depends_on_package_base_url></depends_on_package_base_url>

the url folder that packages are, generally files.pfsense.org/path_to_packages

@Nachtfalke:

I builded freeradius2 from ports with my actual PC-BSD 8.2 but just installed it on PC-BSD vm.
What is the command for:

It will break some dependencies on freebsd 8.1

@Nachtfalke:

make freeradius and dependecies packages
so that I can copy the package to pfsense and install/extract it there?

make package is the cmd you call on freeradius port folder to make package ;)

@Nachtfalke:

And for "pkg_config.8.xml.amd64" and "pkg_config.8.xml" I though I would be the best if I temporarily create a second entry - but I first have to do the steps before :D

sure. :D

@Nachtfalke:

PS: Building with custom build options - is this done by someone of the pfsense team or automaticly by the system ?

Yes, Ermal has a every day build script for packages, take a look on build date of packages in files.pfsense.org.

It's really nice, I got close but stopped in read xml build options and dependencies options to schedule it via cron.

I did not included experimental buid option as it enables all experimental modules including oracle, what would be not so good to compile

still building on x64 and for now dependencies are:

gmddb
krb5
tetex

att,

Marcello Coutinho

Nachtfalke

Ok,
I will go to bed now. It's 1am.

I will download PC-BSD 8.1 which I know is easy to install and then try to create my first package :D

I catched this information…I hope it will be correct ;-)


ports/devel/autoconf/
ports/devel/autoconf-wrapper/
ports/databases/gdbm/
ports/devel/gettext/
ports/devel/gmake/
ports/converters/libiconv/
ports/devel/libltdl/
ports/devel/libtool/
ports/devel/m4/
ports/lang/perl5.12/
ports/lang/python27/

<build_options>WITH_KERBEROS = yes WITH_LDAP = yes WITH_MYSQL = yes WITH_PGSQL = yes WITH_PERL = yes WITH_PYTHON = yes</build_options>

Bye!

marcelloc

ports/devel/autoconf/
ports/devel/autoconf-wrapper/
ports/databases/gdbm/
ports/devel/gettext/
ports/devel/gmake/
ports/converters/libiconv/
ports/devel/libltdl/
ports/devel/libtool/
ports/devel/m4/
ports/lang/perl5.12/
ports/lang/python27/

These are basic config dependencies, ~~I'm checking what dependencies includes ghostscripts and X11 which is not good for a firewall.~~

EDIT

I've changed kerberos dependencies do a much less dependencies from heimdal-1.4_1 then krb5

heimdal-1.4_1

Requires: autoconf-2.68, autoconf-wrapper-20101119, gettext-0.18.1.1, libiconv-1.13.1_1, libtool-2.4_1, m4-1.4.16,1, perl-5.12.4_3, pkg-config-0.25_1

krb5-1.9.2_1


Requires: cups-client-1.5.0, cups-image-1.5.0, dvipsk-tetex-5.95a_5, expat-2.0.1_2, font-amsfonts-3.02_1, fontconfig-2.8.0_1,1, freetype2-2.4.7, gd-2.0.35_7,1, gettext-0.18.1.1, ghostscript9-9.02_4, gmake-3.82, gsfonts-8.11_5, jasper-1.900.1_10, jbig2dec-0.11, jbigkit-1.6, jpeg-8_3, kbproto-1.0.5, libICE-1.0.7,1, libSM-1.2.0,1, libX11-1.4.4,1, libXau-1.0.6, libXaw-1.0.8,1, libXdmcp-1.1.0, libXext-1.3.0_1,1, libXmu-1.1.0,1, libXp-1.0.1,1, libXpm-3.5.9, libXt-1.0.9, libiconv-1.13.1_1, libpthread-stubs-0.3_3, libtool-2.4_1, libwww-5.4.0_4, libxcb-1.7, m4-1.4.16,1, perl-5.12.4_3, pkg-config-0.25_1, png-1.4.8, printproto-1.0.5, t1lib-5.1.2_1,1, teTeX-base-3.0_22, teTeX-texmf-3.0_8, tex-texmflocal-1.9, texi2html-1.82,1, texinfo-4.13.20110529_1, tiff-4.0.0_3, xextproto-7.2.0, xproto-7.0.22

marcelloc

No success :(

freeradius2 with heimdal-1.4_1 returns erros while compiling

gmake[6]: Entering directory `/usr/ports/net/freeradius2/work/freeradius-server-2.1.12/src/modules/rlm_krb5'
/usr/local/bin/libtool --mode=compile cc  -O2 -pipe -I/usr/local/include -L/usr/local/lib -DLDAP_DEPRECATED -fno-strict-aliasing -Wall -D_GNU_SOURCE -pthread -DNDEBUG -I/usr/ports/net/freeradius2/work/freeradius-server-2.1.12/src  -DHEIMDAL_KRB5  -I/usr/local/include -I/usr/include/et -DKRB5_DEPRECATED -c rlm_krb5.c
libtool: compile:  cc -O2 -pipe -I/usr/local/include -L/usr/local/lib -DLDAP_DEPRECATED -fno-strict-aliasing -Wall -D_GNU_SOURCE -pthread -DNDEBUG -I/usr/ports/net/freeradius2/work/freeradius-server-2.1.12/src -DHEIMDAL_KRB5 -I/usr/local/include -I/usr/include/et -DKRB5_DEPRECATED -c rlm_krb5.c  -fPIC -DPIC -o .libs/rlm_krb5.o
In file included from /usr/local/include/krb5.h:846,
                 from rlm_krb5.c:32:
/usr/local/include/krb5-protos.h:41: error: expected identifier or '(' before numeric constant
/usr/local/include/krb5-protos.h:49: error: expected identifier or '(' before numeric constant
/usr/local/include/krb5-protos.h:402: error: expected identifier or '(' before numeric constant
/usr/local/include/krb5-protos.h:486: error: expected identifier or '(' before numeric constant
/usr/local/include/krb5-protos.h:634: error: expected identifier or '(' before numeric constant
/usr/local/include/krb5-protos.h:843: error: expected identifier or '(' before numeric constant
/usr/local/include/krb5-protos.h:908: error: expected identifier or '(' before numeric constant
/usr/local/include/krb5-protos.h:1007: error: expected identifier or '(' before numeric constant
/usr/local/include/krb5-protos.h:1281: error: expected identifier or '(' before numeric constant
/usr/local/include/krb5-protos.h:1289: error: expected identifier or '(' before numeric constant
/usr/local/include/krb5-protos.h:1297: error: expected identifier or '(' before numeric constant
/usr/local/include/krb5-protos.h:1305: error: expected identifier or '(' before numeric constant
/usr/local/include/krb5-protos.h:1313: error: expected identifier or '(' before numeric constant
/usr/local/include/krb5-protos.h:1321: error: expected identifier or '(' before numeric constant
/usr/local/include/krb5-protos.h:1329: error: expected identifier or '(' before numeric constant
/usr/local/include/krb5-protos.h:1337: error: expected identifier or '(' before numeric constant
/usr/local/include/krb5-protos.h:1600: error: expected identifier or '(' before numeric constant
/usr/local/include/krb5-protos.h:1608: error: expected identifier or '(' before numeric constant
/usr/local/include/krb5-protos.h:1616: error: expected identifier or '(' before numeric constant
/usr/local/include/krb5-protos.h:1624: error: expected identifier or '(' before numeric constant
/usr/local/include/krb5-protos.h:1632: error: expected identifier or '(' before numeric constant
/usr/local/include/krb5-protos.h:1640: error: expected identifier or '(' before numeric constant
/usr/local/include/krb5-protos.h:1648: error: expected identifier or '(' before numeric constant
/usr/local/include/krb5-protos.h:1656: error: expected identifier or '(' before numeric constant
/usr/local/include/krb5-protos.h:1741: error: expected identifier or '(' before numeric constant
/usr/local/include/krb5-protos.h:1844: error: expected identifier or '(' before numeric constant
/usr/local/include/krb5-protos.h:1854: error: expected identifier or '(' before numeric constant
/usr/local/include/krb5-protos.h:1874: error: expected identifier or '(' before numeric constant
/usr/local/include/krb5-protos.h:1919: error: expected identifier or '(' before numeric constant
/usr/local/include/krb5-protos.h:1952: error: expected identifier or '(' before numeric constant
/usr/local/include/krb5-protos.h:1975: error: expected identifier or '(' before numeric constant
/usr/local/include/krb5-protos.h:1983: error: expected identifier or '(' before numeric constant
/usr/local/include/krb5-protos.h:2083: error: expected identifier or '(' before numeric constant
/usr/local/include/krb5-protos.h:2127: error: expected identifier or '(' before numeric constant
/usr/local/include/krb5-protos.h:2142: error: expected identifier or '(' before numeric constant
/usr/local/include/krb5-protos.h:2157: error: expected identifier or '(' before numeric constant
/usr/local/include/krb5-protos.h:2169: error: expected identifier or '(' before numeric constant
/usr/local/include/krb5-protos.h:2181: error: expected identifier or '(' before numeric constant
/usr/local/include/krb5-protos.h:2223: error: expected identifier or '(' before numeric constant
/usr/local/include/krb5-protos.h:2229: error: expected identifier or '(' before numeric constant
/usr/local/include/krb5-protos.h:2607: error: expected identifier or '(' before numeric constant
/usr/local/include/krb5-protos.h:2615: error: expected identifier or '(' before numeric constant
/usr/local/include/krb5-protos.h:2622: error: expected identifier or '(' before numeric constant
/usr/local/include/krb5-protos.h:2629: error: expected identifier or '(' before numeric constant
/usr/local/include/krb5-protos.h:3144: error: expected identifier or '(' before numeric constant
/usr/local/include/krb5-protos.h:3178: error: expected identifier or '(' before numeric constant
/usr/local/include/krb5-protos.h:3183: error: expected identifier or '(' before numeric constant
/usr/local/include/krb5-protos.h:3734: error: expected identifier or '(' before numeric constant
/usr/local/include/krb5-protos.h:4091: error: expected identifier or '(' before numeric constant
/usr/local/include/krb5-protos.h:4378: error: expected identifier or '(' before numeric constant
gmake[6]: *** [rlm_krb5.lo] Error 1
gmake[6]: Leaving directory `/usr/ports/net/freeradius2/work/freeradius-server-2.1.12/src/modules/rlm_krb5'
gmake[5]: *** [rlm_krb5] Error 2
gmake[5]: Leaving directory `/usr/ports/net/freeradius2/work/freeradius-server-2.1.12/src/modules'
gmake[4]: *** [all] Error 2
gmake[4]: Leaving directory `/usr/ports/net/freeradius2/work/freeradius-server-2.1.12/src/modules'
gmake[3]: *** [modules] Error 2
gmake[3]: Leaving directory `/usr/ports/net/freeradius2/work/freeradius-server-2.1.12/src'
gmake[2]: *** [all] Error 2
gmake[2]: Leaving directory `/usr/ports/net/freeradius2/work/freeradius-server-2.1.12/src'
gmake[1]: *** [src] Error 2
gmake[1]: Leaving directory `/usr/ports/net/freeradius2/work/freeradius-server-2.1.12'
gmake: *** [all] Error 2
*** Error code 1

Stop in /usr/ports/net/freeradius2.
*** Error code 1

I'll try again tomorrow.

marcelloc

well, with krb5 compiled without thousand of deps ???

can you try this package features on lab with x64 pfsense?

x64
pkg_add -r http://e-sac.siteseguro.ws/packages/amd64/8/All/freeradius-2.1.12.tbz

Nachtfalke

@marcelloc:

well, with krb5 compiled without thousand of deps ???

can you try this package features on lab with x64 pfsense?

x64
pkg_add -r http://e-sac.siteseguro.ws/packages/amd64/8/All/freeradius-2.1.12.tbz

I did this on a fresh 2.0.1 x64 vm:

[2.0.1-RELEASE][admin@pfsense.localdomain]/root(3): pkg_info
bsdinstaller-2.0.2011.0913 BSD Installer mega-package
gettext-0.18.1.1    GNU gettext package
libiconv-1.13.1_1   A character set conversion library
[2.0.1-RELEASE][admin@pfsense.localdomain]/root(4): pkg_add -r http://e-sac.siteseguro.ws/packages/amd64/8/All/freeradius-2.1.12.tbz
Fetching http://e-sac.siteseguro.ws/packages/amd64/8/All/freeradius-2.1.12.tbz... Done.
Fetching http://e-sac.siteseguro.ws/packages/amd64/8/All/krb5-1.9.2_1.tbz... Done.
Fetching http://e-sac.siteseguro.ws/packages/amd64/8/All/python27-2.7.2_3.tbz... Done.

====
Note that some of the standard modules are provided as separate
ports since they require extra dependencies:

bsddb           databases/py-bsddb
gdbm            databases/py-gdbm
sqlite3         databases/py-sqlite3
tkinter         x11-toolkits/py-tkinter

Install them as needed.
====

Error: Unable to get http://e-sac.siteseguro.ws/packages/amd64/8/All/perl-5.12.4_3.tbz: Not Found
Fetching http://e-sac.siteseguro.ws/packages/amd64/8/All/libltdl-2.4_1.tbz... Done.
Error: Unable to get http://e-sac.siteseguro.ws/packages/amd64/8/All/gdbm-1.9.1.tbz: Not Found
===> Setting user and group in radiusd.conf
===> Creating users and/or groups.
Creating group 'freeradius' with gid '133'.
Creating user 'freeradius' with uid '133'.
===> Bootstrapping default certificates, please wait...
===> Adjusting ownership of directory /usr/local/etc/raddb
===> Adjusting ownership of directory /var/log/radacct
===> Adjusting ownership of directory /var/run/radiusd
===> Adjusting ownership of /var/log/radius.log
===> Adjusting ownership of /var/log/radutmp
===> Adjusting ownership of /var/log/radwtmp
===> Updating libdir in /usr/local/etc/raddb/radiusd.conf
pkg_add: can't open dependency file '/var/db/pkg/perl-5.12.4_3/+REQUIRED_BY'!
dependency registration is incomplete
pkg_add: can't open dependency file '/var/db/pkg/gdbm-1.9.1/+REQUIRED_BY'!
dependency registration is incomplete

===============================================================================

To enable FreeRADIUS, put the following line in /etc/rc.conf

radiusd_enable="YES"

The sample configuration can be found at
/usr/local/share/examples/freeradius/raddb

If you are upgrading FreeRADIUS, you are advised to use this as a reference
for updating your configuration.

FreeRADIUS will look for its configuration directory at
/usr/local/etc/raddb by default.

If you did not already have a configuration at this location, the sample
configuration has been copied to this location and has been bootstrapped.

If you wish to point FreeRADIUS to a configuration at a different
location, put the following line in /etc/rc.conf

radiusd_flags="-d /path/to/raddb"

To start the server in normal (daemon) mode, run:

/usr/local/etc/rc.d/radiusd start

and to stop the server, run:

/usr/local/etc/rc.d/radiusd stop

To start the server in debugging mode, run:

/usr/local/etc/rc.d/radiusd debug

You are advised to make cautious changes to the configuration, and to test
frequently, using debugging mode where necessary. Try to resist the
temptation to disable or delete things that you don't understand - you may
well break things!

The documentation has been installed at /usr/local/share/doc/freeradius

Useful configuration advice can be found in the FreeRADIUS Wiki at
http://wiki.freeradius.org

===============================================================================

The only two errors I could see are:

Error: Unable to get http://e-sac.siteseguro.ws/packages/amd64/8/All/perl-5.12.4_3.tbz: Not Found
Error: Unable to get http://e-sac.siteseguro.ws/packages/amd64/8/All/gdbm-1.9.1.tbz: Not Found

Just tried to start it an is runs:

[2.0.1-RELEASE][admin@pfsense.localdomain]/root(6): /usr/local/etc/rc.d/radiusd onestart
Starting radiusd.
[2.0.1-RELEASE][admin@pfsense.localdomain]/root(7): /usr/local/etc/rc.d/radiusd onestatus
radiusd is running as pid 28705.
[2.0.1-RELEASE][admin@pfsense.localdomain]/root(8): ps -ax | grep radiusd
28705  ??  Ss     0:00.00 /usr/local/sbin/radiusd
[2.0.1-RELEASE][admin@pfsense.localdomain]/root(9): ps -auwx | grep radiusd
freeradius 28705  0.0  0.6 43020  6180  ??  Is    1:48AM   0:00.00 /usr/local/sbin/radiusd

I did a "ldd rlm_krb5.so":

[2.0.1-RELEASE][admin@pfsense.localdomain]/usr/local/lib/freeradius-2.1.12(8): ldd rlm_krb5.so
rlm_krb5.so:
        libfreeradius-radius-2.1.12.so => /usr/local/lib/freeradius-2.1.12/libfreeradius-radius-2.1.12.so (0x800c00000)
        libkrb5.so => /usr/local/lib/libkrb5.so (0x800d21000)
        libcom_err.so => /usr/lib/libcom_err.so (0x800eef000)
        libk5crypto.so => /usr/local/lib/libk5crypto.so (0x800ff1000)
        libthr.so.3 => /lib/libthr.so.3 (0x80111b000)
        libc.so.7 => /lib/libc.so.7 (0x800646000)
        libkrb5support.so => /usr/local/lib/libkrb5support.so (0x801233000)

And this for ldap, mysql and pgsql:

[2.0.1-RELEASE][admin@pfsense.localdomain]/usr/local/lib/freeradius-2.1.12(10): ldd rlm_sql_postgresql-2.1.12.so
rlm_sql_postgresql-2.1.12.so:
        libpq.so.5 => not found (0x0)
        libthr.so.3 => /lib/libthr.so.3 (0x800c00000)
        libc.so.7 => /lib/libc.so.7 (0x800646000)
[2.0.1-RELEASE][admin@pfsense.localdomain]/usr/local/lib/freeradius-2.1.12(11): ldd rlm_sql_mysql.so
rlm_sql_mysql.so:
        libmysqlclient.so.18 => not found (0x0)
        libz.so.5 => /lib/libz.so.5 (0x800c00000)
        libm.so.5 => /lib/libm.so.5 (0x800d15000)
        libthr.so.3 => /lib/libthr.so.3 (0x800e34000)
        libc.so.7 => /lib/libc.so.7 (0x800646000)
[2.0.1-RELEASE][admin@pfsense.localdomain]/usr/local/lib/freeradius-2.1.12(12): ldd rlm_ldap.so
rlm_ldap.so:
        libfreeradius-radius-2.1.12.so => /usr/local/lib/freeradius-2.1.12/libfreeradius-radius-2.1.12.so (0x800c00000)
        libldap_r-2.4.so.8 => not found (0x0)
        liblber-2.4.so.8 => /usr/local/lib/liblber-2.4.so.8 (0x800d21000)
        libsasl2.so.2 => not found (0x0)
        libssl.so.6 => /usr/lib/libssl.so.6 (0x800e2e000)
        libcrypto.so.6 => /lib/libcrypto.so.6 (0x800f80000)
        libthr.so.3 => /lib/libthr.so.3 (0x80121a000)
        libc.so.7 => /lib/libc.so.7 (0x800646000)

marcelloc

I've just uploaded missing packages, can you try again?

Maybe it's better removing freeradius packages first

Nachtfalke

@marcelloc:

I've just uploaded missing packages, can you try again?

Maybe it's better removing freeradius packages first

Of course I can.
I reverted the vm to basic pfsense install:

[2.0.1-RELEASE][admin@pfsense.localdomain]/root(3): pkg_info
bsdinstaller-2.0.2011.0913 BSD Installer mega-package
gettext-0.18.1.1    GNU gettext package
libiconv-1.13.1_1   A character set conversion library
[2.0.1-RELEASE][admin@pfsense.localdomain]/root(4): pkg_add -r http://e-sac.siteseguro.ws/packages/amd64/8/All/freeradius-2.1.12.tbz
Fetching http://e-sac.siteseguro.ws/packages/amd64/8/All/freeradius-2.1.12.tbz... Done.
Fetching http://e-sac.siteseguro.ws/packages/amd64/8/All/krb5-1.9.2_1.tbz... Done.
Fetching http://e-sac.siteseguro.ws/packages/amd64/8/All/python27-2.7.2_3.tbz... Done.

====
Note that some of the standard modules are provided as separate
ports since they require extra dependencies:

bsddb           databases/py-bsddb
gdbm            databases/py-gdbm
sqlite3         databases/py-sqlite3
tkinter         x11-toolkits/py-tkinter

Install them as needed.
====

Fetching http://e-sac.siteseguro.ws/packages/amd64/8/All/perl-5.12.4_3.tbz... Done.
Removing stale symlinks from /usr/bin...
    Skipping /usr/bin/perl
    Skipping /usr/bin/perl5
Done.
Creating various symlinks in /usr/bin...
    Symlinking /usr/local/bin/perl5.12.4 to /usr/bin/perl
    Symlinking /usr/local/bin/perl5.12.4 to /usr/bin/perl5
Done.
cd: can't cd to /usr/include
Cleaning up /etc/make.conf... Done.
Spamming /etc/make.conf... Done.
Fetching http://e-sac.siteseguro.ws/packages/amd64/8/All/libltdl-2.4_1.tbz... Done.
Fetching http://e-sac.siteseguro.ws/packages/amd64/8/All/gdbm-1.9.1.tbz... Done.
===> Setting user and group in radiusd.conf
===> Creating users and/or groups.
Creating group 'freeradius' with gid '133'.
Creating user 'freeradius' with uid '133'.
===> Bootstrapping default certificates, please wait...
===> Adjusting ownership of directory /usr/local/etc/raddb
===> Adjusting ownership of directory /var/log/radacct
===> Adjusting ownership of directory /var/run/radiusd
===> Adjusting ownership of /var/log/radius.log
===> Adjusting ownership of /var/log/radutmp
===> Adjusting ownership of /var/log/radwtmp
===> Updating libdir in /usr/local/etc/raddb/radiusd.conf

===============================================================================

To enable FreeRADIUS, put the following line in /etc/rc.conf

radiusd_enable="YES"

The sample configuration can be found at
/usr/local/share/examples/freeradius/raddb

If you are upgrading FreeRADIUS, you are advised to use this as a reference
for updating your configuration.

FreeRADIUS will look for its configuration directory at
/usr/local/etc/raddb by default.

If you did not already have a configuration at this location, the sample
configuration has been copied to this location and has been bootstrapped.

If you wish to point FreeRADIUS to a configuration at a different
location, put the following line in /etc/rc.conf

radiusd_flags="-d /path/to/raddb"

To start the server in normal (daemon) mode, run:

/usr/local/etc/rc.d/radiusd start

and to stop the server, run:

/usr/local/etc/rc.d/radiusd stop

To start the server in debugging mode, run:

/usr/local/etc/rc.d/radiusd debug

You are advised to make cautious changes to the configuration, and to test
frequently, using debugging mode where necessary. Try to resist the
temptation to disable or delete things that you don't understand - you may
well break things!

The documentation has been installed at /usr/local/share/doc/freeradius

Useful configuration advice can be found in the FreeRADIUS Wiki at
http://wiki.freeradius.org

===============================================================================

[2.0.1-RELEASE][admin@pfsense.localdomain]/root(5):

Radiusd is running:

[2.0.1-RELEASE][admin@pfsense.localdomain]/root(5): ps -ax | grep radiusd
[2.0.1-RELEASE][admin@pfsense.localdomain]/root(6): /usr/local/etc/rc.d/radiusd onestart
Starting radiusd.
[2.0.1-RELEASE][admin@pfsense.localdomain]/root(7): /usr/local/etc/rc.d/radiusd onestatus
radiusd is running as pid 7247.
[2.0.1-RELEASE][admin@pfsense.localdomain]/root(8): ps -auwx | grep radiusd
freeradius  7247  0.0  0.6 43020  6184  ??  Ss   12:49PM   0:00.00 /usr/local/sbin/radiusd
[2.0.1-RELEASE][admin@pfsense.localdomain]/root(9):

ldd on the new added modules:

[2.0.1-RELEASE][admin@pfsense.localdomain]/usr/local/lib/freeradius-2.1.12(11): ldd rlm_krb5.so
rlm_krb5.so:
        libfreeradius-radius-2.1.12.so => /usr/local/lib/freeradius-2.1.12/libfreeradius-radius-2.1.12.so (0x800c00000)
        libkrb5.so => /usr/local/lib/libkrb5.so (0x800d21000)
        libcom_err.so => /usr/lib/libcom_err.so (0x800eef000)
        libk5crypto.so => /usr/local/lib/libk5crypto.so (0x800ff1000)
        libthr.so.3 => /lib/libthr.so.3 (0x80111b000)
        libc.so.7 => /lib/libc.so.7 (0x800646000)
        libkrb5support.so => /usr/local/lib/libkrb5support.so (0x801233000)
[2.0.1-RELEASE][admin@pfsense.localdomain]/usr/local/lib/freeradius-2.1.12(12): ldd rlm_sql.so
rlm_sql.so:
        libfreeradius-radius-2.1.12.so => /usr/local/lib/freeradius-2.1.12/libfreeradius-radius-2.1.12.so (0x800c00000)
        libltdl.so.7 => /usr/local/lib/libltdl.so.7 (0x800d21000)
        libthr.so.3 => /lib/libthr.so.3 (0x800e2a000)
        libc.so.7 => /lib/libc.so.7 (0x800646000)
[2.0.1-RELEASE][admin@pfsense.localdomain]/usr/local/lib/freeradius-2.1.12(13): ldd rlm_sql_log.so
rlm_sql_log.so:
        libfreeradius-radius-2.1.12.so => /usr/local/lib/freeradius-2.1.12/libfreeradius-radius-2.1.12.so (0x800c00000)
        libthr.so.3 => /lib/libthr.so.3 (0x800d21000)
        libc.so.7 => /lib/libc.so.7 (0x800646000)
[2.0.1-RELEASE][admin@pfsense.localdomain]/usr/local/lib/freeradius-2.1.12(14): ldd rlm_sql_mysql.so
rlm_sql_mysql.so:
        libmysqlclient.so.18 => not found (0x0)
        libz.so.5 => /lib/libz.so.5 (0x800c00000)
        libm.so.5 => /lib/libm.so.5 (0x800d15000)
        libthr.so.3 => /lib/libthr.so.3 (0x800e34000)
        libc.so.7 => /lib/libc.so.7 (0x800646000)
[2.0.1-RELEASE][admin@pfsense.localdomain]/usr/local/lib/freeradius-2.1.12(15): ldd rlm_sql_postgresql.so
rlm_sql_postgresql.so:
        libpq.so.5 => not found (0x0)
        libthr.so.3 => /lib/libthr.so.3 (0x800c00000)
        libc.so.7 => /lib/libc.so.7 (0x800646000)
[2.0.1-RELEASE][admin@pfsense.localdomain]/usr/local/lib/freeradius-2.1.12(16): ldd rlm_ldap.so
rlm_ldap.so:
        libfreeradius-radius-2.1.12.so => /usr/local/lib/freeradius-2.1.12/libfreeradius-radius-2.1.12.so (0x800c00000)
        libldap_r-2.4.so.8 => not found (0x0)
        liblber-2.4.so.8 => /usr/local/lib/liblber-2.4.so.8 (0x800d21000)
        libsasl2.so.2 => not found (0x0)
        libssl.so.6 => /usr/lib/libssl.so.6 (0x800e2e000)
        libcrypto.so.6 => /lib/libcrypto.so.6 (0x800f80000)
        libthr.so.3 => /lib/libthr.so.3 (0x80121a000)
        libc.so.7 => /lib/libc.so.7 (0x800646000)
[2.0.1-RELEASE][admin@pfsense.localdomain]/usr/local/lib/freeradius-2.1.12(17):

marcelloc

Missing dependencies are:

libmysqlclient.so.18 => not found (0x0)
libpq.so.5 => not found (0x0)
libldap_r-2.4.so.8 => not found (0x0)
libpq.so.5 => not found (0x0)

Did you find any other?

Nachtfalke

@marcelloc:

Missing dependencies are:

libmysqlclient.so.18 => not found (0x0)
libpq.so.5 => not found (0x0)
libldap_r-2.4.so.8 => not found (0x0)
libpq.so.5 => not found (0x0)

Did you find any other?

I only checked these few modules. I will check the others and post back in some minutes!

marcelloc

see if these packages reduces missing dependencies

pkg_add -r http://e-sac.siteseguro.ws/packages/amd64/8/All/mysql-client-5.1.60.tbz
pkg_add -r http://e-sac.siteseguro.ws/packages/amd64/8/All/cyrus-sasl-2.1.25_1.tbz
pkg_add -r http://e-sac.siteseguro.ws/packages/amd64/8/All/openldap-sasl-client-2.4.26.tbz

Nachtfalke

I found this is missing in ldap.so, too:


libsasl2.so.2 => not found (0x0)

Ok, I tested many other modules I know that they are used and there seems to be all ok.

PS: Can you make "WITHOUT_USERS" ? Or will we do this later in pkg_config.8.xml ?

–-- saw your edit ----

This fixed the missing dependency I posted above but with errors:

[2.0.1-RELEASE][admin@pfsense.localdomain]/usr/local/lib/freeradius-2.1.12(86): pkg_add -r http://e-sac.siteseguro.ws/packages/amd64/8/All/cyrus-sasl-2.1.25_1.tbz
Fetching http://e-sac.siteseguro.ws/packages/amd64/8/All/cyrus-sasl-2.1.25_1.tbz... Done.
*** Added group `cyrus' (id 60)
*** Added user `cyrus' (id 60)
/libexec/ld-elf.so.1: Shared object "libgssapi.so.10" not found, required by "saslpasswd2"
/libexec/ld-elf.so.1: Shared object "libgssapi.so.10" not found, required by "sasldblistusers2"
WARNING: Failed to create /usr/local/etc/sasldb2.db

You can use sasldb2 for authentication, to add users use:

        saslpasswd2 -c username

If you want to enable SMTP AUTH with the system Sendmail, read
Sendmail.README

NOTE: This port has been compiled with a default pwcheck_method of
      auxprop.  If you want to authenticate your user by /etc/passwd,
      PAM or LDAP, install ports/security/cyrus-sasl2-saslauthd and
      set sasl_pwcheck_method to saslauthd after installing the
      Cyrus-IMAPd 2.X port.  You should also check the
      /usr/local/lib/sasl2/*.conf files for the correct
      pwcheck_method.

[2.0.1-RELEASE][admin@pfsense.localdomain]/usr/local/lib/freeradius-2.1.12(87): ldd rlm_ldap.so
rlm_ldap.so:
        libfreeradius-radius-2.1.12.so => /usr/local/lib/freeradius-2.1.12/libfreeradius-radius-2.1.12.so (0x800c00000)
        libldap_r-2.4.so.8 => not found (0x0)
        liblber-2.4.so.8 => /usr/local/lib/liblber-2.4.so.8 (0x800d21000)
        libsasl2.so.2 => /usr/local/lib/libsasl2.so.2 (0x800e2e000)
        libssl.so.6 => /usr/lib/libssl.so.6 (0x800f48000)
        libcrypto.so.6 => /lib/libcrypto.so.6 (0x80109a000)
        libthr.so.3 => /lib/libthr.so.3 (0x801334000)
        libc.so.7 => /lib/libc.so.7 (0x800646000)
[2.0.1-RELEASE][admin@pfsense.localdomain]/usr/local/lib/freeradius-2.1.12(88):

mysql-client didn't fix anything. Still missing:

libmysqlclient.so.18 => not found (0x0)

openldap-sasl-client fixed the missing rlm_ldap.so dependency.

So just these two are still missing: (PGSQL, SQL and MySQL)

libmysqlclient.so.18 => not found (0x0)
libpq.so.5 => not found (0x0)

[2.0.1-RELEASE][admin@pfsense.localdomain]/usr/local/lib/freeradius-2.1.12(98): ldd rlm_sql_mysql.so
rlm_sql_mysql.so:
        libmysqlclient.so.18 => not found (0x0)
        libz.so.5 => /lib/libz.so.5 (0x800c00000)
        libm.so.5 => /lib/libm.so.5 (0x800d15000)
        libthr.so.3 => /lib/libthr.so.3 (0x800e34000)
        libc.so.7 => /lib/libc.so.7 (0x800646000)
[2.0.1-RELEASE][admin@pfsense.localdomain]/usr/local/lib/freeradius-2.1.12(99): ldd rlm_sql_postgresql.so
rlm_sql_postgresql.so:
        libpq.so.5 => not found (0x0)
        libthr.so.3 => /lib/libthr.so.3 (0x800c00000)
        libc.so.7 => /lib/libc.so.7 (0x800646000)

marcelloc

Copy sasl missing deps from this folder
http://e-sac.siteseguro.ws/pfsense/8/amd64/All/ldd/

The dest folder maybe /usr/local/lib

Nachtfalke

Which version of mysql-client did you choose ? pkg_info says 5.1.60

If did:


pkg_add -f ftp://ftp.freebsd.org/pub/FreeBSD/ports/amd64/packages-8-stable/All/mysql-client-5.5.19.tbz

This seems to fix the missing libmysqlclient.so.18:

[2.0.1-RELEASE][admin@pfsense.localdomain]/usr/local/lib/freeradius-2.1.12(43): ldd rlm_sql_mysql.so
rlm_sql_mysql.so:
        libmysqlclient.so.18 => /usr/local/lib/mysql/libmysqlclient.so.18 (0x800c00000)
        libz.so.5 => /lib/libz.so.5 (0x801035000)
        libm.so.5 => /lib/libm.so.5 (0x80114a000)
        libthr.so.3 => /lib/libthr.so.3 (0x801269000)
        libc.so.7 => /lib/libc.so.7 (0x800646000)
        libstdc++.so.6 => /usr/lib/libstdc++.so.6 (0x801381000)
        libgcc_s.so.1 => /lib/libgcc_s.so.1 (0x80158c000)

This command gave me before just .15.so and .16.so but not the recommended .18.so

[2.0.1-RELEASE][admin@pfsense.localdomain]/usr/local/lib/freeradius-2.1.12(45): ldconfig -r | grep 'mysql'
        search directories: /usr/lib:/usr/local/lib:/lib:/usr/local/lib/freeradius-2.1.12:/usr/local/lib/mysql
        127:-lmysqlclient.15 => /usr/local/lib/mysql/libmysqlclient.so.15
        128:-lmysqlclient.16 => /usr/local/lib/mysql/libmysqlclient.so.16
        129:-lmysqlclient_r.16 => /usr/local/lib/mysql/libmysqlclient_r.so.16
        130:-lmysqlclient.18 => /usr/local/lib/mysql/libmysqlclient.so.18
        131:-lmysqlclient_r.18 => /usr/local/lib/mysql/libmysqlclient_r.so.18

Nachtfalke

And this fixed the PGSQL:


[2.0.1-RELEASE][admin@pfsense.localdomain]/usr/local/lib/freeradius-2.1.12(57): pkg_add -r ftp://ftp.freebsd.org/pub/FreeBSD/ports/amd64/packages-8-stable/All/postgresql-client-9.1.2.tbz
Fetching ftp://ftp.freebsd.org/pub/FreeBSD/ports/amd64/packages-8-stable/All/postgresql-client-9.1.2.tbz... Done.
Fetching ftp://ftp.freebsd.org/pub/FreeBSD/ports/amd64/packages-8-stable/All/pkg-config-0.25_1.tbz... Done.
Fetching ftp://ftp.freebsd.org/pub/FreeBSD/ports/amd64/packages-8-stable/All/libxml2-2.7.8_1.tbz... Done.

The PostgreSQL port has a collection of "side orders":

postgresql-docs
  For all of the html documentation

p5-Pg
  A perl5 API for client access to PostgreSQL databases.

postgresql-tcltk
  If you want tcl/tk client support.

postgresql-jdbc
  For Java JDBC support.

postgresql-odbc
  For client access from unix applications using ODBC as access
  method. Not needed to access unix PostgreSQL servers from Win32
  using ODBC. See below.

ruby-postgres, py-PyGreSQL
  For client access to PostgreSQL databases using the ruby & python
  languages.

p5-postgresql-plperl, postgresql-pltcl & postgresql-plruby
  For using perl5, tcl & ruby as procedural languages.

postgresql-contrib
  Lots of contributed utilities, postgresql functions and
  datatypes. There you find pg_standby, pgcrypto and many other cool
  things.

etc...

[2.0.1-RELEASE][admin@pfsense.localdomain]/usr/local/lib/freeradius-2.1.12(58): ldd rlm_sql_postgresql.so                                                    rlm_sql_postgresql.so:
        libpq.so.5 => /usr/local/lib/libpq.so.5 (0x800c00000)
        libthr.so.3 => /lib/libthr.so.3 (0x800d29000)
        libc.so.7 => /lib/libc.so.7 (0x800646000)
        libintl.so.9 => /usr/local/lib/libintl.so.9 (0x800e41000)
        libssl.so.6 => /usr/lib/libssl.so.6 (0x800f4a000)
        libcrypto.so.6 => /lib/libcrypto.so.6 (0x80109c000)
        libiconv.so.3 => /usr/local/lib/libiconv.so.3 (0x801336000)
[2.0.1-RELEASE][admin@pfsense.localdomain]/usr/local/lib/freeradius-2.1.12(59):

marcelloc

@Nachtfalke:

Which version of mysql-client did you choose ? pkg_info says 5.1.60

I'll change it to 5.5

Nachtfalke

As long as you are doing all my work - please let me know if I could help you at least a bit :P

marcelloc

@Nachtfalke:

As long as you are doing all my work -

That's fun :D

Instead of pcbsd, try a pure freebsd.

please let me know if I could help you at least a bit :P

we are helping each other. I compile and you check dependencies

tritron

Is it posible to use existing users of activedirectory in this package ? Pfsense comes with certeficate managment and user list and works with active directory and also freeradius supports active directory.
So would be nice to remove certiificate option and user option and just use pfsense user list or other servers that are listed in user settings in pfsense. Does the current package supports active directory if i edit config by hand or the module is not compiled in ?

marcelloc

@tritron:

Does the current package supports active directory if i edit config by hand or the module is not compiled in ?

That's what we is trying to do. ;)

For now it's not supported as we are compiling freeradius with kerberos and etc.

After binaries are ok, Nachtfalke will continue package update.

marcelloc

Nachtfalke,

mysql5.5 and postgres9.1.2 are uploaded.

I'm also doind this job to i386 the link is

http://e-sac.siteseguro.ws/packages/8/All/

Nachtfalke

Okay, then I will reset my VMs and test. :)

Nachtfalke

Feedback for tested machine pfsense 2.0.1 amd64:
This installs without errors or missing dependencies:
http://e-sac.siteseguro.ws/packages/amd64/8/All/freeradius-2.1.12.tbz

I need to manually install these packages because ldap and *sql have missing files.

pkg_add -r http://e-sac.siteseguro.ws/packages/amd64/8/All/mysql-client-5.1.60.tbz
pkg_add -r http://e-sac.siteseguro.ws/packages/amd64/8/All/cyrus-sasl-2.1.25_1.tbz
pkg_add -r http://e-sac.siteseguro.ws/packages/amd64/8/All/openldap-sasl-client-2.4.26.tbz

Still the (minor) error with this package:
http://e-sac.siteseguro.ws/packages/amd64/8/All/cyrus-sasl-2.1.25_1.tbz

[2.0.1-RELEASE][admin@pfsense.localdomain]/root(13): pkg_add -r http://e-sac.siteseguro.ws/packages/8/All/cyrus-sasl-2.1.25_1.tbz
Fetching http://e-sac.siteseguro.ws/packages/8/All/cyrus-sasl-2.1.25_1.tbz... Done.
Fetching http://e-sac.siteseguro.ws/packages/8/All/db41-4.1.25_4.tbz... Done.
*** Added group `cyrus' (id 60)
*** Added user `cyrus' (id 60)
/libexec/ld-elf.so.1: Shared object "libgssapi.so.10" not found, required by "saslpasswd2"
/libexec/ld-elf.so.1: Shared object "libgssapi.so.10" not found, required by "sasldblistusers2"
WARNING: Failed to create /usr/local/etc/sasldb2

You can use sasldb2 for authentication, to add users use:

        saslpasswd2 -c username

If you want to enable SMTP AUTH with the system Sendmail, read
Sendmail.README

NOTE: This port has been compiled with a default pwcheck_method of
      auxprop.  If you want to authenticate your user by /etc/passwd,
      PAM or LDAP, install ports/security/cyrus-sasl2-saslauthd and
      set sasl_pwcheck_method to saslauthd after installing the
      Cyrus-IMAPd 2.X port.  You should also check the
      /usr/local/lib/sasl2/*.conf files for the correct
      pwcheck_method.

After installing all above I can start radiusd. This is what I tested:
plain users file authentication using "radtest" tool.
Authentication works.

I enabled ldap and configured users file to only use ldap to authenticate users:
freeradius is starting, loading the ldap modules and default configuration. I have tested with "radtest" tool and the radius tries to connect to ldap. I do not have any LDAP/AD configured so I could not finally test that. But it looks like it should work.

I disabled ldap and enabled sql.
using "MYSQL" as datasbase and "POSTGRESSQL" is working. I still have no database to test but I did the tests from ldap and freeradius tries to connect to sql database.

We didn't compile ORACLE because this is still experimental.
Something what is a bit strange is that I could choose "MSSQL" in sql.conf but the there is the rlm_sql_mssql.sq module missing. But there is no build option in Makefile for this database support. Perhaps we could think about that in future versions but not at the moment.

Kerberos module has all dependencies but could not test it. Kerberos together with samba to use MS AD to authenticate.
That is something what isn't really clear for me at the moment and the freeradius documentation isn't, too. Is the ldap module enough to connect to an MS AD or do we really need to go the way using kerberos and samba. perhaps the second way is the way which fully sopports MS AD. As far as I know Windows Server 2003 and high have the ability to communicate with the LDAP protocol.
But there is nothing we can do now - I think.

I will go on testing i386 as I did it with amd64.

marcelloc

The missing Shared object are not related to cyrus packages but on files not included in pfSense. That why I created a folder with missing libs

It's easy to work around in xml instalation.

cyrus is also used in postfix for authentication in smtp.

Nachtfalke

@marcelloc:

The missing Shared object are not related to cyrus packages but on files not included in pfSense. That why I created a folder with missing libs

It's easy to work around in xml instalation.

cyrus is also used in postfix for authentication in smtp.

Yes, we can use "additionalfilesneeded" right ?

i386:
It is not build with PostgreSQL.
And "openldap-sasl-client-2.4.26.tbz" is missing on your server.
"Cyrus-sasl" installs fine when I add the "ldd" files before.
krb5 is ok with dependencies, mysql is too.

Puhhh, that was really hard work on this package…for you :P
But great job till now. SQL and LDAP support will make this package interesting for some people :)

gettons

Hi,

I have just removed the old package and installed the current one 2.1.12 pkg v1.4.2
The configuration has been kept back, but now I cannot login properly.

This is the log :

Tue Jan 3 21:52:49 2012 : Auth: Login incorrect: [$MYUSER/<via auth-type="EAP">] (from client pfsenselocal port 0 cli B4-07-F9-E5-9F-81)</via>

I have also tried to reset the username and pass but It did not work.

It was fine before upgrading though.

Thanks