NEW Package: freeRADIUS 2.x
-
I'm on the latest version of pfSense (2.2.4 - 64 bit) with Captive Portal and the FreeRADIUS 2.x package setup for traffic capping. Everything is working properly to re-authenticate users every minute and I'm using the MAC address as the username. I'm currently capping users at 6000MB (total upload and download) per day. I added a test machine in and noticed that the traffic counter isn't working correctly. I was aware of this issue on older version of pfSense, but it seems that I am having a similar issue in the latest build. Any thoughts? See below an output from the system logs.
Oct 30 15:37:56 root: FreeRADIUS: Used amount of daily traffic by 247703xxxxxx is 35 MB of 6000 MB! The user was accepted!!!
Oct 30 15:38:58 root: FreeRADIUS: Used amount of daily traffic by 247703xxxxxx is 70 MB of 6000 MB! The user was accepted!!!I have a local counter on the test machine, counting all traffic in/out of the wireless NIC. Within that time period, it shows I've only transferred 800KB, but the logs are showing 30+ MB. Thanks in advance for any input.
-
I'm on the latest version of pfSense (2.2.4 - 64 bit) with Captive Portal and the FreeRADIUS 2.x package setup for traffic capping. Everything is working properly to re-authenticate users every minute and I'm using the MAC address as the username. I'm currently capping users at 6000MB (total upload and download) per day. I added a test machine in and noticed that the traffic counter isn't working correctly. I was aware of this issue on older version of pfSense, but it seems that I am having a similar issue in the latest build. Any thoughts? See below an output from the system logs.
Oct 30 15:37:56 root: FreeRADIUS: Used amount of daily traffic by 247703xxxxxx is 35 MB of 6000 MB! The user was accepted!!!
Oct 30 15:38:58 root: FreeRADIUS: Used amount of daily traffic by 247703xxxxxx is 70 MB of 6000 MB! The user was accepted!!!I have a local counter on the test machine, counting all traffic in/out of the wireless NIC. Within that time period, it shows I've only transferred 800KB, but the logs are showing 30+ MB. Thanks in advance for any input.
Yes the the problem still exists int 2.2.4 i tried every thing and every tutorial on the internet but it's confirmed that this is a bug.
-
That is unfortunate, I could really use this feature. Is the bug actively being worked on / any idea on when it will be fixed? Thanks.
-
Good day to everybody,
As you maybe know, latest package Freeradius2 1.6.15 that contains a Freeradius 2.2.6 daemon, has a trouble on EAP-TLS authentication.
Above all with latest Android 6.0 Marshmallow.
Some tech details are available here:
https://code.google.com/p/android/issues/detail?id=188867#c29
Someone known if it exists a workaround, perhaps editing some configuration files on freeradius, or also on Android with some apps, in order to avoid this issue ?
Thanks a lot in advance for your time and for any suggestion.Just got Marshmallow OTA update myself and smacked into this same problem. EAP-TLS configuration that has been working fine for quite a while, now no longer works on upgraded Nexus 7.
Symptoms are that the device appears to negotiate authentication, FreeRADIUS logs indicate the device was authenticated, but the device never finishes joining the network, and just keeps repeating.
From the Google thread, the issue is tied to the use of TLSv1.2 and downgrading to TLSv1.1 or 1.0, the final keying is correct. But downgrading to broken encryption standards is not what I'd consider a workaround.
From other forum reading, it sounds like this is going to be a quickly growing problem as Marshmallow is currently being rolled out OTA to all Nexus devices and expected to hit OEM devices soon.
So really the only question then is how soon an updated release that contains a fix for this issue can be made available.
-
@TechyTech:
Just got Marshmallow OTA update myself and smacked into this same problem. EAP-TLS configuration that has been working fine for quite a while, now no longer works on upgraded Nexus 7.
As I said earlier in the thread, the package needs to be respun with FreeRADIUS 2.2.9 to solve this problem. If the package has a maintainer, hopefully he/she can deal with this, otherwise it would be helpful if someone built and tested an upgraded package, then submitted a pull request.
The longer term issue is that FreeRADIUS 2.x is now End of Life. A new package is needed, based on FreeRADIUS 3.x, though, depending on the timeline for pfSense 2.3, there may well be little point building a FreeRADIUS 3.x package for pfSense 2.2. It might be best to build a FreeRADIUS 3.x package for pfSense 2.3 rather than upgrading the FreeRADIUS 2.x package for the Bootstrap based pfSense 2.3 GUI.
-
…package needs to be respun with FreeRADIUS 2.2.9 to solve this problem....The longer term issue is that FreeRADIUS 2.x is now End of Life. A new package is needed, based on FreeRADIUS 3.x...
I Agree with you, but for users like me, developing a new pfsense package with latest freeradius 3 version, requires a skill and time (to read pfsense package build documentation) that not everybody has …
At moment, only as temporary workaround, I installed a Zeroshel distribution, only for wifi authentication, because it has a newer freeradius (maybe 2.2.12 or .19) than pfsense, and it is able to work with latest Android and iOS releases. -
At moment, only as temporary workaround, I installed a Zeroshel distribution, only for wifi authentication, because it has a newer freeradius (maybe 2.2.12 or .19) than pfsense, and it is able to work with latest Android and iOS releases.
FreeRADIUS 2.2.9 is the latest - and quite possibly the last - release in the 2.2.x series. If you see version numbers higher than that, they're not using the version numbering from the FreeRADIUS developers.
Your work-round is probably the best for now. I don't have the time to do any work on fixing the package and I'm not sure anyone is maintaining it. The chances are that all that is needed is to upgrade the FreeRADIUS code to 2.2.9, though there might be other changes necessary for the package to work correction with 2.2.9.
A FreeRADIUS 3.x package is a much larger undertaking. Arguably the correct approach - as I have advocated elsewhere - is to produce a FreeRADIUS 3.x package for pfSense 2.3 rather than upgrading the current 2.x package for Bootstrap. Considering the limited life remaining of pfSense 2.2.x, it's hard to justify the effort involved in developing a FreeRADIUS 3.x package for non Bootstrap versions of pfSense.
-
The chances are that all that is needed is to upgrade the FreeRADIUS code to 2.2.9, though there might be other changes necessary for the package to work correction with 2.2.9.
I am 100% willing to do this and test it. I'm having trouble finding (in the package's source) where it finds the actual Freeradius software. If anyone can point me in the right direction, I'll definitely update the package.
See the other topic specifically about the TLS issue which I've outlined what I'm looking for a bit more: https://forum.pfsense.org/index.php?topic=104343.msg588608#msg588608
-
It's not something that can be fixed in the package code in our repositories. The PBI needs to be rebuilt, but due to other changes in the ports tree after the last version was made, rebuilding it is non-trivial. There is an open ticket for it here: https://redmine.pfsense.org/issues/5318
In the meantime, FreeRADIUS on pfSense 2.3 is using FreeRADIUS 2.2.9 and is in a good/usable state. If someone absolutely requires it, upgrading to pfSense 2.3 beta (or at least having a VM with it running for FreeRADIUS!) is not a bad suggestion at this point in time.
-
Just installed freeRADIUS on a relatively fresh (2.2.6) PFSense install. After minimal configuration clients were served with an expired (1/28/16) "Example Server Certificate". Is this intentional? I originally assumed that bootstrap was called after installing and starting freeRADIUS 2 the first time, but this isn't the case? After deleting the certificate and running bootstrap a new (temporally valid) certificate was generated. Perhaps this is expected? Thanks.
-
Will this freeradius work with mariadb?
-
@tux:
Will this freeradius work with mariadb?
To answer this question, yes as of the moment freeradius2 v1.6.19 under pfsense v2.2.6. My DB server is mysqld 5.5.47-MariaDB-1ubuntu0.14.04.1.
-
Ias anyone able to install freeradius2 from the package manager in pfsense 2.3-rc? After restoring my config, the radiusd service is running (and working), but the package manager says freeradius2 isn't installed. I've tried reinstalling (or uninstalling) the package, but nothing works.
-
What did resolve the problem described by reggie14 in my case was to download the configuration, edit the xml-file by deleting the sections dealing with freeradius and then uploading the result again.
-
What did resolve the problem described by reggie14 in my case was to download the configuration, edit the xml-file by deleting the sections dealing with freeradius and then uploading the result again.
I was able to resolve it by doing another clean install. The first thing I did (before restoring config) was to install freeradius2. Then I restored a backup config that had several packages disabled.
With your method, did you lose your radius config?
-
Dear Reggie14,
Doing it my way did keep most of the configuration except - for reasons I do not understand completely - the interfaces and the EAP settings. I was able to copy them (both manually and via HASync are possible as it seems) easily from another system. I found that simpler than unplugging cables, reassigning interfaces and link aggregation groups and similar consequences of installing from scratch. For my remaining systems, I plainly uninstalled freeradius before the upgrade to install it again afterwards. That has not been necessary with any 2.x upgrade before. This time, it was probably mandatory to upgrade without any losses.
Regards,
Michael Schefczyk
-
Does the amount of traffic counter bug still exist in the latest version of FreeRADIUS on pfSense 2.3 or am I most likely going to have to wait until FreeRADIUS 3 is released?
-
Does the amount of traffic counter bug still exist in the latest version of FreeRADIUS on pfSense 2.3 or am I most likely going to have to wait until FreeRADIUS 3 is released?
Which bug specifically? There have been fixes recently to both time and data counting.
-
Sorry for not being specific, see post 602 of mine in this thread :)
-
That looks like a traffic counting bug a fixed a while back in the package (In November), FreeRADIUS2 pkg version 1.6.17 or later should be OK.
