Printing to other network segment

[dsemon]

Hi

Since upgrading from 1.2.3 to 2.0.1-RELEASE (i386) i cannot print from the 172.16.1.0 (LANE) network to 192.168.1.0 (LAN). Printer IP 192.168.1.40.
The firewall rules are the same but the printer seems not connected (except Anti-Lockout Rule). Before upgrade no problem.

LAN:
PASS * * * LAN Address 80 443 * * Anti-Lockout Rule
PASS * 192.168.1.40 * LANE net * * none Access from the Printer to LANE
BLOCK * LAN net * LANE net * * none   LAN -> Block access to LANE  (generally no access to LANE)
PASS * LAN net * * * * none   Default LAN -> any

LANE:
PASS * LANE net * 192.168.1.40 * * none   LAN -> Printer 
BLOCK * LANE net * LAN net * * none   LANE -> Block access to LAN  (generally no access to LAN)
PASS * LANE net * * * * none   Default LANE -> any

What could be the problem?

Thank for help.
Dani

[podilarius]

Are you using automatic or manual outbound NAT?

[dsemon]

Automatic outbound NAT rule generation