HELP ROUTE/NAT



  • Hello,

    I needo help, have just installed PFSENSE and in my computer I have 3 NICS:

    • LAN: 10.1.1.xxx
    • WAN: DHCP
    • OPT (WAN2): 192.168.2.2

    I have two ADSL and I want use one of them only for the navigation (port 80).

    I want that the whole traffic that this one directed the port 80 goes out for OPT (WAN2). In iptables the serious configuarción something like that:

    Iptables-t nat - to POSTROUTING - protocol tcp-s $LAN - destination-port 80-j SNAT - to-source 192.168.2.2

    You might say to me in PFSENSE since(as,like) I can put this configuration. I am raw and go trying(meaning) it several days and I do not obtain it.

    A greeting and thank you very much for everything.



  • Have a look at http://doc.pfsense.org/index.php/Multi-Wan/Load-Balancing . What you want to do is similiar, you just don't use pools (skip that part) but a gateway IP in your firewallrules.



  • THANKS FOR HELP ME.

    ALL IS OK NOW.

    BYE!


Log in to reply