The specified 'Local port' is in use. Please select another value
-
I successfully created an open VPN tunnel to pfsense 2 now I want to add more users, do I use the same server CERT or create an entirely new client cert and server cert. I have been trying both but when I create the server cert or use an existing cert I can't save with an errror stating "The specified 'Local port' is in use. Please select another value "
Can 2 separate OPEN VPN users use the same port?
Thanks for any assistance.
-
Does anyone have a solution to this? I would assume 2 users connecting to a PFSENSE network via openVPN would be common. has anyone here successfully had 2 users connect with 2 different logins?
-
If you use a site-to-site tunnel, then you use different ports for each connection.
If multiple users connect via a PKI to your server, then you only have a single server for all clients.
You create a single server, and each client has his own .key/.crt file. -
Thank You for the reply, I am not to sure how to setup PKI on the server as of now under open VPN if I edit the current and only user there under the server tab the "server mode' is setup as remote access SSL/TLS + user Authentication. Can you explain further were to set it fo site-to-site tunnel? These are roaming users that will connect via open vpn on their winxp machines.
site-to-site tunnel
If you use a site-to-site tunnel, then you use different ports for each connection.
If multiple users connect via a PKI to your server, then you only have a single server for all clients.
You create a single server, and each client has his own .key/.crt file. -
Is there any tutorial to show hwo to setup OPEN vpn with PKI? I have successfully created a VPN tunnel for a user but I need to have 4 users connected and I don't' want to open 4 ports up. I would like them all communicating through the same port.
Is there any advantages / disadvantages to setup this way?