Не видит встроенныую сетевую карту!



  • собран в mini корпусе
    Вот материнка http://www.nix.ru/autocatalog/motherboards_asrock/ASRock_PV530ITX_VIA_PV530_CPU_onboard_VIA_VX900_LAN_SATA_ITX_2DDRIII_113558.html
    за место ХДД Усб Флэшка

    • еще одна PCI сетевая карта на реалтек чипсете (ее видет замечательно).
      а вот встроенную в материнку не хочет ни где видеть.

    dmesg -a

    Copyright © 1992-2010 The FreeBSD Project.
    Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
           The Regents of the University of California. All rights reserved.
    FreeBSD is a registered trademark of The FreeBSD Foundation.
    FreeBSD 8.1-RELEASE-p6 #0: Mon Dec 12 17:53:00 EST 2011
       root@FreeBSD_8.0_pfSense_2.0-snaps.pfsense.org:/usr/obj./usr/pfSensesrc/src/sys/pfSense_SMP.8 i386
    Timecounter "i8254" frequency 1193182 Hz quality 0
    CPU: VIA C7-D Processor 1800MHz (1795.51-MHz 686-class CPU)
     Origin = "CentaurHauls"  Id = 0x6d0  Family = 6  Model = d  Stepping = 0
     Features=0xa7c9bbff <fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,cmov,pat,clflush,acpi,mmx,fxsr,sse,sse2,tm,pbe>Features2=0x4181 <sse3,est,tm2,xtpr>VIA Padlock Features=0xffcc <rng,aes,aes-ctr,sha1,sha256,rsa>real memory  = 1073741824 (1024 MB)
    avail memory = 895705088 (854 MB)
    ACPI APIC Table: <080910 APIC1118>
    ioapic0 <version 0.3="">irqs 0-23 on motherboard
    ioapic1 <version 0.3="">irqs 24-47 on motherboard
    netisr_init: forcing maxthreads to 1 and bindthreads to 0 for device polling
    wpi: You need to read the LICENSE file in /usr/share/doc/legal/intel_wpi/.
    wpi: If you agree with the license, set legal.intel_wpi.license_ack=1 in /boot/loader.conf.
    module_register_init: MOD_LOAD (wpi_fw, 0xc0988300, 0) error 1
    ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
    ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
    module_register_init: MOD_LOAD (ipw_bss_fw, 0xc0789340, 0) error 1
    ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
    ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
    module_register_init: MOD_LOAD (ipw_ibss_fw, 0xc07893e0, 0) error 1
    ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
    ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
    module_register_init: MOD_LOAD (ipw_monitor_fw, 0xc0789480, 0) error 1
    wlan: mac acl policy registered
    kbd1 at kbdmux0
    cryptosoft0: <software crypto="">on motherboard
    padlock0: <aes-cbc,sha1,sha256>on motherboard
    acpi0: <080910 RSDT1118> on motherboard
    acpi0: [ITHREAD]
    acpi0: Power Button (fixed)
    acpi0: reservation of fed02000, 1000 (3) failed
    acpi0: reservation of fed03000, 1000 (3) failed
    acpi0: reservation of fed05000, 1000 (3) failed
    acpi0: reservation of fff00000, 100000 (3) failed
    acpi0: reservation of fecc0000, 1000 (3) failed
    acpi0: reservation of fec00000, 1000 (3) failed
    acpi0: reservation of fee00000, 1000 (3) failed
    acpi0: reservation of 0, a0000 (3) failed
    acpi0: reservation of 100000, 37f00000 (3) failed
    Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
    acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
    cpu0: <acpi cpu="">on acpi0
    acpi_hpet0: <high precision="" event="" timer="">iomem 0xfed00000-0xfed003ff on acpi0
    Timecounter "HPET" frequency 14318180 Hz quality 900
    pcib0: <acpi host-pci="" bridge="">port 0xcf8-0xcff on acpi0
    pci0: <acpi pci="" bus="">on pcib0
    vgapci0: <vga-compatible display="">mem 0xfd000000-0xfdffffff,0xfc000000-0xfcffffff,0xf0000000-0xf7ffffff irq 40 at device 1.0 on pci0
    pcib1: <acpi pci-pci="" bridge="">irq 27 at device 3.0 on pci0
    pci2: <acpi pci="" bus="">on pcib1
    pcib2: <acpi pci-pci="" bridge="">irq 35 at device 3.2 on pci0
    pci1: <acpi pci="" bus="">on pcib2
    atapci0: <via ata="" controller="">port 0xdc00-0xdc07,0xd880-0xd883,0xd800-0xd807,0xd480-0xd483,0xd400-0xd40f irq 21 at device 15.0 on pci0
    atapci0: [ITHREAD]
    ata2: <ata 0="" channel="">on atapci0
    ata2: [ITHREAD]
    ata3: <ata 1="" channel="">on atapci0
    ata3: [ITHREAD]
    uhci0: <via 83c572="" usb="" controller="">port 0xc880-0xc89f irq 20 at device 16.0 on pci0
    uhci0: [ITHREAD]
    uhci0: LegSup = 0xa000
    usbus0: <via 83c572="" usb="" controller="">on uhci0
    uhci1: <via 83c572="" usb="" controller="">port 0xcc00-0xcc1f irq 22 at device 16.1 on pci0
    uhci1: [ITHREAD]
    uhci1: LegSup = 0xa000
    usbus1: <via 83c572="" usb="" controller="">on uhci1
    uhci2: <via 83c572="" usb="" controller="">port 0xd000-0xd01f irq 21 at device 16.2 on pci0
    uhci2: [ITHREAD]
    uhci2: LegSup = 0xa000
    usbus2: <via 83c572="" usb="" controller="">on uhci2
    uhci3: <via 83c572="" usb="" controller="">port 0xd080-0xd09f irq 23 at device 16.3 on pci0
    uhci3: [ITHREAD]
    uhci3: LegSup = 0xa000
    usbus3: <via 83c572="" usb="" controller="">on uhci3
    ehci0: <via vt6202="" usb="" 2.0="" controller="">mem 0xfeaefc00-0xfeaefcff irq 23 at device 16.4 on pci0
    ehci0: [ITHREAD]
    usbus4: EHCI version 1.0
    usbus4: <via vt6202="" usb="" 2.0="" controller="">on ehci0
    isab0: <pci-isa bridge="">at device 17.0 on pci0
    isa0: <isa bus="">on isab0
    pcib3: <acpi pci-pci="" bridge="">at device 19.0 on pci0
    pci3: <acpi pci="" bus="">on pcib3
    rl0: <realtek 10="" 8139="" 100basetx="">port 0xe800-0xe8ff mem 0xfebffc00-0xfebffcff irq 16 at device 3.0 on pci3
    miibus0: <mii bus="">on rl0
    rlphy0: <realtek internal="" media="" interface="">PHY 0 on miibus0
    rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
    rl0: [ITHREAD]
    acpi_button0: <power button="">on acpi0
    atrtc0: <at realtime="" clock="">port 0x70-0x71 on acpi0
    ppc0: <parallel port="">port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0
    ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
    ppc0: FIFO with 16/16/9 bytes threshold
    ppc0: [ITHREAD]
    ppbus0: <parallel port="" bus="">on ppc0
    plip0: <plip network="" interface="">on ppbus0
    plip0: [ITHREAD]
    lpt0: <printer>on ppbus0
    lpt0: [ITHREAD]
    lpt0: Interrupt-driven port
    ppi0: <parallel i="" o="">on ppbus0
    atkbdc0: <keyboard controller="" (i8042)="">port 0x60,0x64 irq 1 on acpi0
    atkbd0: <at keyboard="">irq 1 on atkbdc0
    kbd0 at atkbd0
    atkbd0: [GIANT-LOCKED]
    atkbd0: [ITHREAD]
    psm0: <ps 2="" mouse="">irq 12 on atkbdc0
    psm0: [GIANT-LOCKED]
    psm0: [ITHREAD]
    psm0: model IntelliMouse, device ID 3
    uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
    uart0: [FILTER]
    pmtimer0 on isa0
    sc0: <system console="">at flags 0x100 on isa0
    sc0: VGA <16 virtual consoles, flags=0x300>
    vga0: <generic isa="" vga="">at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
    ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
    ata0: [ITHREAD]
    ata1 at port 0x170-0x177,0x376 irq 15 on isa0
    ata1: [ITHREAD]
    est0: <enhanced speedstep="" frequency="" control="">on cpu0
    p4tcc0: <cpu frequency="" thermal="" control="">on cpu0
    Timecounter "TSC" frequency 1795510810 Hz quality 800
    Timecounters tick every 1.000 msec
    IPsec: Initialized Security Association Processing.
    usbus0: 12Mbps Full Speed USB v1.0
    usbus1: 12Mbps Full Speed USB v1.0
    usbus2: 12Mbps Full Speed USB v1.0
    usbus3: 12Mbps Full Speed USB v1.0
    usbus4: 480Mbps High Speed USB v2.0
    ad5: 76318MB <seagate st380817as="" 3.42="">at ata2-slave UDMA33
    ugen0.1: <via>at usbus0
    uhub0: <via 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus0
    ugen1.1: <via>at usbus1
    uhub1: <via 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus1
    ugen2.1: <via>at usbus2
    uhub2: <via 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus2
    ugen3.1: <via>at usbus3
    uhub3: <via 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus3
    ugen4.1: <via>at usbus4
    uhub4: <via 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus4
    Root mount waiting for: usbus4 usbus3 usbus2 usbus1 usbus0
    uhub0: 2 ports with 2 removable, self powered
    uhub1: 2 ports with 2 removable, self powered
    uhub2: 2 ports with 2 removable, self powered
    uhub3: 2 ports with 2 removable, self powered
    Root mount waiting for: usbus4
    Root mount waiting for: usbus4
    Root mount waiting for: usbus4
    uhub4: 8 ports with 8 removable, self powered
    Trying to mount root from ufs:/dev/ad5s1a
    Configuring crash dumps…
    Using /dev/ad5s1b for dump device.
    Mounting filesystems...

    ___
    ___/ f \
    / p \___/ Sense
    \___/   \
       \___/

    Welcome to pfSense 2.0.1-RELEASE  ...

    No core dumps found.
    Creating symlinks...
    .
    .
    .
    done.
    External config loader 1.0 is now starting...
    ad5s1b

    Launching the init system...
    done.
    Initializing...

    pciconf -lv
    hostb0@pci0:0:0:0:      class=0x060000 card=0x04101849 chip=0x04101106 rev=0x80 hdr=0x00
       class      = bridge
       subclass   = HOST-PCI
    hostb1@pci0:0:0:1:      class=0x060000 card=0x14101849 chip=0x14101106 rev=0x00 hdr=0x00
       class      = bridge
       subclass   = HOST-PCI
    hostb2@pci0:0:0:2:      class=0x060000 card=0x24101849 chip=0x24101106 rev=0x00 hdr=0x00
       class      = bridge
       subclass   = HOST-PCI
    hostb3@pci0:0:0:3:      class=0x060000 card=0x34101849 chip=0x34101106 rev=0x00 hdr=0x00
       class      = bridge
       subclass   = HOST-PCI
    hostb4@pci0:0:0:4:      class=0x060000 card=0x44101849 chip=0x44101106 rev=0x00 hdr=0x00
       class      = bridge
       subclass   = HOST-PCI
    hostb5@pci0:0:0:5:      class=0x060000 card=0x54101849 chip=0x54101106 rev=0x00 hdr=0x00
       class      = bridge
       subclass   = HOST-PCI
    hostb6@pci0:0:0:6:      class=0x060000 card=0x64101849 chip=0x64101106 rev=0x00 hdr=0x00
       class      = bridge
       subclass   = HOST-PCI
    hostb7@pci0:0:0:7:      class=0x060000 card=0x74101849 chip=0x74101106 rev=0x00 hdr=0x00
       class      = bridge
       subclass   = HOST-PCI
    vgapci0@pci0:0:1:0:     class=0x030000 card=0x71221849 chip=0x71221106 rev=0x00 hdr=0x00
       class      = display
       subclass   = VGA
    pcib1@pci0:0:3:0:       class=0x060400 card=0xa4101849 chip=0xa4101106 rev=0x00 hdr=0x01
       class      = bridge
       subclass   = PCI-PCI
    pcib2@pci0:0:3:2:       class=0x060400 card=0xc4101849 chip=0xc4101106 rev=0x00 hdr=0x01
       class      = bridge
       subclass   = PCI-PCI
    hostb8@pci0:0:3:4:      class=0x060000 card=0x00000000 chip=0xe4101106 rev=0x00 hdr=0x00
       class      = bridge
       subclass   = HOST-PCI
    atapci0@pci0:0:15:0:    class=0x01018f card=0x90011849 chip=0x90011106 rev=0x00 hdr=0x00
       class      = mass storage
       subclass   = ATA
    uhci0@pci0:0:16:0:      class=0x0c0300 card=0x30381849 chip=0x30381106 rev=0xa0 hdr=0x00
       class      = serial bus
       subclass   = USB
    uhci1@pci0:0:16:1:      class=0x0c0300 card=0x30381849 chip=0x30381106 rev=0xa0 hdr=0x00
       class      = serial bus
       subclass   = USB
    uhci2@pci0:0:16:2:      class=0x0c0300 card=0x30381849 chip=0x30381106 rev=0xa0 hdr=0x00
       class      = serial bus
       subclass   = USB
    uhci3@pci0:0:16:3:      class=0x0c0300 card=0x30381849 chip=0x30381106 rev=0xa0 hdr=0x00
       class      = serial bus
       subclass   = USB
    ehci0@pci0:0:16:4:      class=0x0c0320 card=0x31041849 chip=0x31041106 rev=0x90 hdr=0x00
       class      = serial bus
       subclass   = USB
    isab0@pci0:0:17:0:      class=0x060100 card=0x84101849 chip=0x84101106 rev=0x00 hdr=0x00
       class      = bridge
       subclass   = PCI-ISA
    hostb9@pci0:0:17:7:     class=0x060000 card=0xa3531849 chip=0xa3531106 rev=0x00 hdr=0x00
       class      = bridge
       subclass   = HOST-PCI
    pcib3@pci0:0:19:0:      class=0x060401 card=0xb3531849 chip=0xb3531106 rev=0x00 hdr=0x01
       class      = bridge
       subclass   = PCI-PCI
    rl0@pci0:3:3:0: class=0x020000 card=0x813910ec chip=0x813910ec rev=0x10 hdr=0x00
       class      = network
       subclass   = ethernet

    ifconfig
    rl0: flags=8843 <up,broadcast,running,simplex,multicast>metric 0 mtu 1500
           options=8 <vlan_mtu>ether 00:e0:52:bb:c7:50
           inet6 fe80::2e0:52ff:febb:c750%rl0 prefixlen 64 scopeid 0x1
           inet 192.168.77.132 netmask 0xffffff00 broadcast 192.168.77.255
           nd6 options=3 <performnud,accept_rtadv>media: Ethernet autoselect (100baseTX <full-duplex>)
           status: active
    plip0: flags=8810 <pointopoint,simplex,multicast>metric 0 mtu 1500
    pfsync0: flags=0<> metric 0 mtu 1460
           syncpeer: 224.0.0.240 maxupd: 128 syncok: 1
    pflog0: flags=100 <promisc>metric 0 mtu 33200
    enc0: flags=0<> metric 0 mtu 1536
    lo0: flags=8049 <up,loopback,running,multicast>metric 0 mtu 16384
           options=3 <rxcsum,txcsum>inet 127.0.0.1 netmask 0xff000000
           inet6 ::1 prefixlen 128
           inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6
           nd6 options=3 <performnud,accept_rtadv>Видится только сетевая карта что воткнута в PCI
    встроенная судя по драйверам на реалтек сайте if_re
    ну он ее даже в PCI устройствай не видит.

    Подскажите куда копать?</performnud,accept_rtadv></rxcsum,txcsum></up,loopback,running,multicast></promisc></pointopoint,simplex,multicast></full-duplex></performnud,accept_rtadv></vlan_mtu></up,broadcast,running,simplex,multicast></via></via></via></via></via></via></via></via></via></via></seagate></cpu></enhanced></generic></system></ps></at></keyboard></parallel></printer></plip></parallel></parallel></at></power></realtek></mii></realtek></acpi></acpi></isa></pci-isa></via></via></via></via></via></via></via></via></via></via></ata></ata></via></acpi></acpi></acpi></acpi></vga-compatible></acpi></acpi></high></acpi></aes-cbc,sha1,sha256></software></version></version></rng,aes,aes-ctr,sha1,sha256,rsa></sse3,est,tm2,xtpr></fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,cmov,pat,clflush,acpi,mmx,fxsr,sse,sse2,tm,pbe>



  • @xtc:

    Видится только сетевая карта что воткнута в PCI
    встроенная судя по драйверам на реалтек сайте if_re
    ну он ее даже в PCI устройствай не видит.

    Подскажите куда копать?

    Уже обсуждалось.
    1. Интегрированные сетевухи иногда не определяются и не работают.
    2. Если работают, то загружают CPU
    3. Копать в сторону отключения в биосе интегрированой сетевой и установки PCI сетевой карты.



  • Сетевой контроллер Realtek RTL8105E10/100 Мбит/сек

    http://www.freebsd.org/releases/8.1R/hardware.html#ETHERNET и ищем текст

    The re(4) driver supports

    8105 не поддерживается.
    В FreeBSD 9.0 поддерживается. Когда pfSense будет на ядре 9.0, тогда заработает…



  • Спасибо вам  dr.gopher и  svd542
    значит либо ВЛАНы сейчас либо УСБ сетевую.
    т.к. 1 порт PCI на метеринке.



  • т.к. 1 порт PCI на метеринке.

    вам такая штука нужна:

    Покопайтесь на алиэкспрессе, я там её видел пару месяцев назад.
    оффтоп: да, ульта была классная контора :-\


Log in to reply