Rule to pass all traffic from LAN to WAN

[mlowijs]

Hi all,

I've been trying to craft a rule to allow all traffic from one network to the internet, without having to create an "allow to any" rule.
I know this sounds very basic, and I'm sure it's easy to do but I can't seem to create one that works, nor can I really find anything about it on the internet.
I should mention that pfSense's external IP is a 10.0.1.x address at this moment (I'm setting up a server at home to be put in a data center later).

Looking at the attached diagram, I'm trying to pass all traffic from the CLIENTS network to the EXTERNAL network.
I tried using destination = EXTERNAL subnet, destination = EXTERNAL address and even destination = the IP of the external gateway (10.0.1.1), but none seem to work. When destination = any, it works fine.

Do I have this problem because pfSense's EXTERNAL interface is behind my home router, or am I missing something completely?

[Cry Havok]

Assuming you're using 2.0, the rule should be on the LAN interface, source of the LAN subnet. You then can either chose a destination of not 192.168.0.0/16 or possibly a gateway of the WAN interface (I've not tested that, but it looks like it should be right).

[mlowijs]

Brilliant, not 192.168.0.0/16 did the trick! Thanks.