PFSENSE OpenVPN



  • Dear all,

    Really need your help. I'm created OpenVPN via PFSense details as below :

    WAN IP : Static IP
    LAN IP : 192.168.1.0/24
    Tunnel : 10.1.1.0/24

    During the client connection, It's connected but cannot remote/access to the LAN IP(Office).
    The detalis as below :

    Sat Feb 25 15:07:43 2012 OpenVPN 2.0.9 Win32-MinGW [SSL] [LZO] built on Oct  1 2006
    Sat Feb 25 15:07:43 2012 IMPORTANT: OpenVPN's default port number is now 1194, based on an official port number assignment by IANA.  OpenVPN 2.0-beta16 and earlier used 5000 as the default port.
    Sat Feb 25 15:07:43 2012 Control Channel Authentication: using 'pfsense-udp-1194-tls.key' as a OpenVPN static key file
    Sat Feb 25 15:07:43 2012 LZO compression initialized
    Sat Feb 25 15:07:43 2012 UDPv4 link local (bound): [undef]:1194
    Sat Feb 25 15:07:43 2012 UDPv4 link remote: Static IP:1194
    Sat Feb 25 15:07:44 2012 [MALVPN_CA] Peer Connection Initiated with Static IP:1194
    Sat Feb 25 15:07:45 2012 TAP-WIN32 device [Local Area Connection 3] opened: \.\Global{800D43DD-CC9D-49E2-B821-F70E753B0E2B}.tap
    Sat Feb 25 15:07:45 2012 Notified TAP-Win32 driver to set a DHCP IP/netmask of 10.1.1.2/255.255.255.0 on interface {800D43DD-CC9D-49E2-B821-F70E753B0E2B} [DHCP-serv: 10.1.1.0, lease-time: 31536000]
    Sat Feb 25 15:07:45 2012 Successful ARP Flush on interface [18] {800D43DD-CC9D-49E2-B821-F70E753B0E2B}
    Sat Feb 25 15:07:45 2012 ROUTE: route addition failed using CreateIpForwardEntry: One or more arguments are not correct.   [if_index=13]
    Sat Feb 25 15:07:45 2012 Warning: route gateway is not reachable on any active network adapters: 10.1.1.1
    Sat Feb 25 15:07:45 2012 Warning: route gateway is not reachable on any active network adapters: 10.1.1.1
    Sat Feb 25 15:07:45 2012 Warning: route gateway is not reachable on any active network adapters: 10.1.1.1
    Sat Feb 25 15:07:45 2012 Initialization Sequence Completed

    Please advise.

    Thanks.



  • If you are running the OpenVPN Client on a Windows Vista/7 OS then you need to run it  "as administrator" because without windows cannot configure the routes.

    Further you need to create an allow rule on the openvpn interface on pfsense.


Log in to reply