Alternative for MS TMG 2010 = pfSense ???

marcelloc

This is the topic(in portuguese again :)) with a smailll tutorial to setup ntlm authentication on squid

http://forum.pfsense.org/index.php/topic,47532.msg249812.html#msg249812

rmpf

Thanks for the tip!! After completing the configuration witn samba It is possible to log the usernames for audit purposes?????

marcelloc

@rmpf:

Thanks for the tip!! After completing the configuration witn samba It is possible to log the usernames for audit purposes?????

Sure. You can use sarg to create reports.

Supermule

What will then happen if some of the packages get updated and it breaks the config that replaces TMG??

marcelloc

@Supermule:

What will then happen if some of the packages get updated and it breaks the config that replaces TMG??

In this case, package maintainers or anyone else can fix the problem or depending on the package and the problem, you can buy some commercial support hours and ask to fix it.

And what will then happen if microsoft decides to stop TMG development and keep it just fixing bugs?

canefield

Dear all,

I was on holiday a couple of days. I'm back and did a lot of testing and thing are actually working ::). Still I have some questions.

Has somebody thorough tested the build in OWA functionality? I encounter problems regarding the 'Outlook Anywhere' and 'AutoDiscover' aspects. It can not verify the servers nor the auto configuration. Only the webbased functionality is working like it suppose to be.
I also could use the 'webservers' and 'mappings' instead. But is it not so that I should than configure all URI's Exchange is using? Or can I use wildcard after the domain, e.g.: ;mail.domain.com/ ?
Than something else but related ofcourse. Is it possible to create some kind of redirect from HTTP to HTTPS? More specific, when browsing to 'http://webmail.domain.com' it get redirected to 'https://webmail.domain.com/owa'? Yes, all regarding M$ Exchange ;)
I'm hosting some kind of test-website right now (.NET ASPX). When browsing to that site I get some parts of the page, but seconds later IE is complaining and wants to reload the page. Why is not everything loaded into the page? Pictures especially and links won't work? How, why?
Related to #4, should I configure Squid Proxy first? Instead of currently only using Reverse Proxy? Anybody a good manual for Squid Proxy with caching, Windows Update, etc.?

Thanks a lot,
Canefield

marcelloc

@canefield:

Has somebody thorough tested the build in OWA functionality? I encounter problems regarding the 'Outlook Anywhere' and 'AutoDiscover' aspects. It can not verify the servers nor the auto configuration. Only the webbased functionality is working like it suppose to be.

I didn't :(

@canefield:

I also could use the 'webservers' and 'mappings' instead. But is it not so that I should than configure all URI's Exchange is using? Or can I use wildcard after the domain, e.g.: ;mail.domain.com/ ?

I think wildcards are accepted by config but there are so many paths for owa?

@canefield:

Than something else but related ofcourse. Is it possible to create some kind of redirect from HTTP to HTTPS? More specific, when browsing to 'http://webmail.domain.com' it get redirected to 'https://webmail.domain.com/owa'? Yes, all regarding M$ Exchange ;)

The easiest way to do this is and redirect html on webserver

@canefield:

I'm hosting some kind of test-website right now (.NET ASPX). When browsing to that site I get some parts of the page, but seconds later IE is complaining and wants to reload the page. Why is not everything loaded into the page? Pictures especially and links won't work? How, why?

take a look on access log file for access_denied urls using tail -f

@canefield:

Related to #4, should I configure Squid Proxy first? Instead of currently only using Reverse Proxy?

You can use only reverse functions. I'm planning to build when time permits two conf files one for normal proxy and one for reverse proxy with no changes on gui. This way you can have two log files, one for normal proxy and other for reverse.

@canefield:

Anybody a good manual for Squid Proxy with caching, Windows Update, etc.?

Squid3 package on local cache tab, has these dynamic options o gui.

canefield

@marcelloc:

@canefield:

Has somebody thorough tested the build in OWA functionality? I encounter problems regarding the 'Outlook Anywhere' and 'AutoDiscover' aspects. It can not verify the servers nor the auto configuration. Only the webbased functionality is working like it suppose to be.

I didn't :(
Somebody…please

@canefield:

I also could use the 'webservers' and 'mappings' instead. But is it not so that I should than configure all URI's Exchange is using? Or can I use wildcard after the domain, e.g.: ;mail.domain.com/ ?

I think wildcards are accepted by config but there are so many paths for owa?
I've checked it with the primary paths (/owa, /rpc, /autodiscover, /Microsoft-Server-ActiveSync, /ews, /ecp), without luck. Can sombody help?

@canefield:

Than something else but related ofcourse. Is it possible to create some kind of redirect from HTTP to HTTPS? More specific, when browsing to 'http://webmail.domain.com' it get redirected to 'https://webmail.domain.com/owa'? Yes, all regarding M$ Exchange ;)

The easiest way to do this is and redirect html on webserver
I want to mange this by pfSense…can that be done?

@canefield:

I'm hosting some kind of test-website right now (.NET ASPX). When browsing to that site I get some parts of the page, but seconds later IE is complaining and wants to reload the page. Why is not everything loaded into the page? Pictures especially and links won't work? How, why?

take a look on access log file for access_denied urls using tail -f
Could you give me additional information/instructions? I don't now much about Linux.

@canefield:

Related to #4, should I configure Squid Proxy first? Instead of currently only using Reverse Proxy?

You can use only reverse functions. I'm planning to build when time permits two conf files one for normal proxy and one for reverse proxy with no changes on gui. This way you can have two log files, one for normal proxy and other for reverse.
Perfect!

@canefield:

Anybody a good manual for Squid Proxy with caching, Windows Update, etc.?

Squid3 package on local cache tab, has these dynamic options o gui.
Any suggestions how to configure Squid for caching movies (YouTube), pictures, ISO's and Windows Updates?

All thank you very much,
Canefield

marcelloc

@canefield:

Could you give me additional information/instructions? I don't now much about Linux.

go to console/ssh, and do tail -f /var/squid/logs/access.log

@canefield:

Any suggestions how to configure Squid for caching movies (YouTube), pictures, ISO's and Windows Updates?

All options that I saw on tutorials are coded on gui, select these options on local cache tab and traffic mgmt

canefield

Dear Marcello and others,

@marcelloc:

@canefield:

Could you give me additional information/instructions? I don't now much about Linux.

go to console/ssh, and do tail -f /var/squid/logs/access.log
I've checked the log but is completely blanc

@canefield:

Any suggestions how to configure Squid for caching movies (YouTube), pictures, ISO's and Windows Updates?

All options that I saw on tutorials are coded on gui, select these options on local cache tab and traffic mgmt
You mean under 'Services=>Proxy server=>Local Cache'

Furthermore I'm trying configuring Squid3 with HAVP and SquidGuard. I read a lot of topics but don't have a clue what to use.
INET -> HAVP -> SQUID -> NETWORK or INET -> SQUID -> NETWORK
I want the internal network completely secured (HAVP), cached (SQUID) and filtered (SquidGuard).

I've tried several configurations, but all without my desires/wishes. Meaning trying to setup HAVP working with Squid and vise versa. Using transparent proxy and so on…no luck at all.
So first only used Squid as transparent proxy...but is transparent working. With everything configured I don't see/notice that Squid is my proxy. I did a check on 'whatismyip.com' and nothing illustrates I'm using a proxy; only if I configure it manually. So my first question, how to test if I'm really using the proxy? Second how to combine that with HAVP and SquidGuard? In which order (INET -> HAVP -> SQUID -> NETWORK or INET -> SQUID -> NETWORK) and why would you use/suggest that?

Also played around with Postfix. I've tried lots of possibilities, but can't get it to work. What to do for accepting domains and forward those to the appopriate servers? Do I need using the whitelists? Other configurations to keep in mind? When I want Postfix to scan on virusses etc. what is the best thing to use? Mailscanner? Do I need both or just Postfix?

And at last…no luck with configuring the reverse proxy. I can't get MS Exchange 2010 working with Outlook Anywhere (Outlook over RPC) nor my test website on ASPX and different host-headers.

I appreciate your time and effort,
Canefield

marcelloc

canefield,

I think it's better to split these questions on package forum topics.

att,
Marcello Coutinho

canefield

Okay will do.

Thx