NOW $700 - PCI PCMCI Slot Card for EVDO REV A connectivity

kapara

Just a bump…unless there is an update...... ;D

Shaggy

Edit: I may have spoken too soon. I was looking to come over here from m0n0wall but just realized that the embedded version of pfSense requires 128mb of ram and I only have 64 so unless the solution can be easily ported over to m0n0wall, I will have to withdraw my offer.

I can add another $100 for a solution that works with a Sprint Aircard 580 (Qualcomm MSM 5500) as a failover solution in case our dsl goes out. It doesn't have to be an automatic failover in my case as the card won't be permanently in the Soekris 4521, it will be manually inserted if the dsl goes down. Of course an automatic failover option would be nice too. ;-)

I can provide remote terminal access to the Soekris board and card if it helps.

Pyramid linux is supposed to have this feature but I have had several issues with Pyramid so I am looking at other distros.

Thanks,
Jeff

P.S. By the previous subject line, I am assuming this brings the bounty to $700

kapara

I don't think anyone monitoring this post gets notified by a modification. Try posting a new message. As to your question you might want to direct that to one of the devs.

Mark

cmb

If we can get a working solution for this, I want to port it to m0n0wall as well if it's acceptable to Manuel.

3G has proven very difficult to implement because virtually every card requires its own custom kernel patch, so I don't know how likely it will be that we'll ever see a solution supporting a large number of 3G cards. We'll have something that supports at least some cards in 1.3.

Those who are interested in this, could you please post the specific make and model of the card you are wanting to use?

kapara

Hi CMB,

Is this true for USB EVDO Cards? I think Sullrich is testing with USB unless PCMCIA and USB are no different regarding the developement. Also Since it has been a while it might be a good idea to see who is still interested in this bounty. I currently do not have a need since I used an alternate solution but I will still honor my bounty. I actually like the fact that I am no longer tied to a specific card so if one of my customers goes down I can easily rush in and provide Internet access. I also would like to offer this as an option for managed services…failover option.

tacfit

Kyocera 650 (PCMCIA)

cybrsrfr

@cmb:

3G has proven very difficult to implement because virtually every card requires its own custom kernel patch, so I don't know how likely it will be that we'll ever see a solution supporting a large number of 3G cards. We'll have something that supports at least some cards in 1.3.

I think a native PFSense solution would be great. Until then the best way I see of doing this is with the CradlePoint CTR350 you can bridge the EVDO to the ethernet port on it and plug that into the WAN or secondardy WAN on PFSense.
http://www.evdoinfo.com/content/view/2124/63/

Please note: I don't work for CradlePoint, EVDO info, or 3Gstore.com. Just think the technology is cool and could work nicely with PFSense.

@cmb:

Those who are interested in this, could you please post the specific make and model of the card you are wanting to use?

I prefer any of the EVDO Rev A. USB options because they would work on the both the full and embedded hardware.

dotdash

Haven't looked at this stuff in a while. A solution for me would have to be usable with hardware that is currently available from providers in my area. A quick check shows that in the Chicagoland area, both Sprint and Verizon offer the Sierra 595U and the Novatel U727 as USB options, so support for either of them would be ideal. Something that could adapt a currently available pcmcia card to USB/Ethernet would also be acceptable. I have pretty much given up on using a pci adapter- only certain models work, there are fit issues, and they're not a solution for Alix/Wrap boxes.

daurwid

I would like to see this happen as well. I have a Pantech PX500 Rev. A. http://www.pantechusa.com/web/guest/px500

eri--

If people are still interested in this i would like to take this bounty.
Though it requires test hardware from all parties interestred in the bounty or at least a remore freebsd machine with console access and the card pluged in.

Waiting for answers from pledgers and response to the above comments.

Ermal

dotdash

It's been a while, but I can still get the money for this bounty allocated. If the bounty is accepted we will be getting a new account for testing. I'm looking at getting Sprint with the Novatel Merlin u727 usb-modem. The Sierra hardware is changing- the 595u seems to be being phased out for the 575.
There looks to be some experimental support for some cards, including the u727 here:
http://lists.freebsd.org/pipermail/p4-projects/2008-March/025214.html
It would be easier for me to setup remote access to a test box than to ship the equipment, but if needed can work something out.
Just to recap, our general guidelines are:

Device is usable as a normal interface in pfSense, able to used for failover, etc.
Must be usable with hardware I can get new now, preferably a modem I can get with the account.
USB connectivity seems the only usable solution.
The code is open source / part of pfSense.

sullrich

I have been working on this in my spare time. Ermal is going to port a driver from OpenBSD so we will most likely share this bounty in the end. However I need to finish up the OpenVPN project before I can fully commit to this one…. but soon.

cybrsrfr

@sullrich:

Ermal is going to port a driver from OpenBSD

Which cards will this driver support?

sullrich

Having trouble locating the email. Will keep looking.

eri--

@mcrane:

@sullrich:

Ermal is going to port a driver from OpenBSD

Which cards will this driver support?

{ USB_VENDOR_AIRPRIME, USB_PRODUCT_AIRPRIME_PC5220 },
{ USB_VENDOR_DELL, USB_PRODUCT_DELL_W5500 },
{ USB_VENDOR_KYOCERA2, USB_PRODUCT_KYOCERA2_KPC650 },
{ USB_VENDOR_NOVATEL1, USB_PRODUCT_NOVATEL1_FLEXPACKGPS },
{ USB_VENDOR_NOVATEL, USB_PRODUCT_NOVATEL_EXPRESSCARD },
{ USB_VENDOR_NOVATEL, USB_PRODUCT_NOVATEL_MERLINV620 },
{ USB_VENDOR_NOVATEL, USB_PRODUCT_NOVATEL_S720 },
{ USB_VENDOR_NOVATEL, USB_PRODUCT_NOVATEL_U720 },
{ USB_VENDOR_NOVATEL, USB_PRODUCT_NOVATEL_XU870 },
{ USB_VENDOR_NOVATEL, USB_PRODUCT_NOVATEL_ES620 },
{ USB_VENDOR_QUALCOMM, USB_PRODUCT_QUALCOMM_MSM_HSDPA },
{ USB_VENDOR_SIERRA, USB_PRODUCT_SIERRA_EM5625 },
{ USB_VENDOR_SIERRA, USB_PRODUCT_SIERRA_AIRCARD_580 },
{ USB_VENDOR_SIERRA, USB_PRODUCT_SIERRA_AIRCARD_595 },
{ USB_VENDOR_SIERRA, USB_PRODUCT_SIERRA_AIRCARD_875 },
{ USB_VENDOR_SIERRA, USB_PRODUCT_SIERRA_MC5720 },
{ USB_VENDOR_SIERRA, USB_PRODUCT_SIERRA_MC5725 },
{ USB_VENDOR_SIERRA, USB_PRODUCT_SIERRA_MC8755 },
{ USB_VENDOR_SIERRA, USB_PRODUCT_SIERRA_MC8755_2 },
{ USB_VENDOR_SIERRA, USB_PRODUCT_SIERRA_MC8755_3 },
{ USB_VENDOR_SIERRA, USB_PRODUCT_SIERRA_MC8765 },
{ USB_VENDOR_SIERRA, USB_PRODUCT_SIERRA_MC8775 },

I will be glad if others made available machines with serial consoles and FreeBSD if any other modems can be tested.
Since most drivers can support even more things but their ID's have not been tested.

sullrich

That's the one.

cybrsrfr

Thats a nice list of cards!
"I'm still geeking out about it!"

dimi3

Huawei E220 support would be nice, it's havely used in Europe I think. For feebsd 6.2 there is a patch to make it work. More info here http://www.freebsd.org/cgi/query-pr.cgi?pr=usb/118686.

droolcules

I'd can chip in $100 to the project since pfsense is that awesome, but my router is literally dying as we speak.

Any remote idea on the time frame ?

Anyone know of any working Linux/BSD setups that are getting full speed ? Seems people get greatly reduced EVDO speeds with most of the NIX setups.

I guess in the meantime I can put together a ug Windows based router.. maybe Winroute I dunno what is good. This is just a home router, not production but WHY NOT run it secure. This is already my second Kr1 router. Anyone know of any other EVDO PC router solution or an ok router program on Windows for a meantime solution ?

If my router dies before I can put together a decent NIX firewall/router I'll probably be forced to build a pC solution or buy a KR2. They new kr2 looks far better, but still lame security. Maybe eventually get a Net4521 for the setup. mmmm low power usage.

Thanks for the great program.

dotdash

PC Engines is coming out with an Alix board with mini PCIexpress http://www.pcengines.ch/alix6b2.htm which would make for a nice self-contained evdo solution with low power usage.