Squid3 - New GUI with sync, normal and reverse proxy

podilarius

Thanks!

phil.davis

Apologies to all - my little "fix" for the default language had a bit of extra cut-and-paste somehow. I noticed it soon after it got committed, but unfortunately it took quite a while for anyone with the necessary privs to commit the better version. I'll stare a lot harder at seemingly mindless fixes in future!

al_reidy

@phil.davis:

Apologies to all - my little "fix" for the default language had a bit of extra cut-and-paste somehow. I noticed it soon after it got committed, but unfortunately it took quite a while for anyone with the necessary privs to commit the better version. I'll stare a lot harder at seemingly mindless fixes in future!

Its working now. Thank you all for your help. ;D

nutt318

I would like to report a bug in the Squid Reverse Proxy. Under the HTTPS settings the default port used is 443 if you leave the feild empty. However if you look at squid.conf in /usr/local/etc/squid the listening port is still 80. So you have to manually put in 443 for the listening port.

Even though I found this bug I'm still having issues with getting the HTTPS reverse proxy working correctly.

I'm getting a squid error page saying Access Denied. Access control configuration prevents your request from being allowed at this time.

Not sure of the problem but it looks like others are having problems with the reverse proxy on HTTPS as well.
http://forum.pfsense.org/index.php/topic,51945.0.html

dhatz

Folks, is there any reason why in proxy_monitor.sh you're using a series of pipes (btw both awk seem redundant)

NUM_PROCS=`ps auxw | grep "[s]quid -D"|awk '{print $2}'| wc -l | awk '{ print $1 }'`

rather than a simpler pgrep -f "process" | wc -l ?[/s]

podilarius

Please re-install as I have modified the code using the pgrep a couple of days ago.

dhatz

@podilarius:

Please re-install as I have modified the code using the pgrep a couple of days ago.

Hi, I'm not running squid on pfsense, but I just happened to notice the commits at:

https://github.com/bsdperimeter/pfsense-packages/blob/master/config/squid3/proxy_monitor.sh
(which is the latest code afaik)

podilarius

sorry .. looking at the wrong line of code. That package (squid3) is for 1.2.3. The one that is on 2.1 and I think 2.0 is under the directory squid-reverse. So, you are talking about making it:


NUM_PROCS=`pgrep -f "squid -f" | wc -l | awk '{ print $1 }'`

The awk has to be in there to format the number returned properly as output without the awk yields spaces or tabs before the number returned.
or even


NUM_PROCS=`ps auxw | grep -c "[s]quid -f"'

This has only 1 pipe like your example.[/s]

phil.davis

@marcelloc - I corrected the conf_mount_rw and conf_mount_ro calls so that after a squid3 installation on nanobsd-like systems the filesystem ends up read-only. (Previously it was accidentally left read-write at the end of the install).

Now this message appears in /tmp/PHP_errors.log

[03-Aug-2012 04:16:47 UTC] PHP Warning:  copy(/root/2.1-BETA0.captiveportal.inc.backup): failed to open stream: Read-only file system in /usr/local/pkg/squid.inc on line 1640

This is the code:

	if (!file_exists('/root/'.$pfsense_version.'.captiveportal.inc.backup')) {
		copy ($cp_file,'/root/'.$pfsense_version.'.captiveportal.inc.backup');
		}
	if($found_rule > 0){
		file_put_contents($cp_file,$new_cp_inc, LOCK_EX);
		}

I am not sure what you want to do, perhaps put the backup in /tmp? (lost after a reboot on nanobsd), perhaps also only do the backup if a rule is found? Maybe something like this:

	if($found_rule > 0){
		if (!file_exists('/tmp/'.$pfsense_version.'.captiveportal.inc.backup')) {
			copy ($cp_file,'/tmp/'.$pfsense_version.'.captiveportal.inc.backup');
			}

		file_put_contents($cp_file,$new_cp_inc, LOCK_EX);
		}

This code is not in the older squid(2), so this problem is just in squid3.

marcelloc

@phil.davis:

I am not sure what you want to do, perhaps put the backup in /tmp? (lost after a reboot on nanobsd), perhaps also only do the backup if a rule is found? Maybe something like this:

well, it will need a mount_rw before this test and a mount_ro after.

mavnezz

Hi,

i'm using without any probs the squid3 (3.1.20 pkg 2.0.5_3) package on pfsense 2.0.1. thanks for this.

is it possible to use squid on 2 diffent ports on the same ip. for now it's '8080', additionally i want to use '3128'. 8080 should use the wan1 and 3128 should use the wan2 connection. is this in any way possible?

greets

marcelloc

you can try this config on custom options.

find the listening args you need and place there.

athompso

I don't understand what the point is of having XMLRPC sync without being able to listen on a CARP IP address.

can anyone tell me if there is a way to get this pkg to listen on a CARP IP (or even just listen on all interfaces!), and
what is an example use case for synchronized configs otherwise?

(Also see http://redmine.pfsense.org/issues/2591 and http://redmine.pfsense.org/issues/2592.)

Thanks,
-Adam

jimp

Unless the cache and connection state are shared between squid instances, you don't want it binding on a CARP VIP. It makes little sense to have the traffic leave from a shared IP and shared pf states when the actual connections in squid are independent, even if the config is synchronized.

The point of syncing the config is so the slave can take over, and it can, you just can't seamlessly fail over 100% in squid. Even if the states were to sync over it doesn't matter, the squid process itself would have no knowledge of the connection.

marcelloc

@athompso:

can anyone tell me if there is a way to get this pkg to listen on a CARP IP (or even just listen on all interfaces!), and

Listen squid on loopback(lo0) and create nat rules from carp address to 127.0.0.1

2.1 gui framework has the listen all as well listen on virtual ips, so squid3 on pfsense 2.1 will have this option and no need to workaround with nats.

athompso

@jimp:

Unless the cache and connection state are shared between squid instances, you don't want it binding on a CARP VIP. It makes little sense to have the traffic leave from a shared IP and shared pf states when the actual connections in squid are independent, even if the config is synchronized.
The point of syncing the config is so the slave can take over, and it can, you just can't seamlessly fail over 100% in squid. Even if the states were to sync over it doesn't matter, the squid process itself would have no knowledge of the connection.

I don't particularly care about seamless failover, I just want to avoid using PAC. If I have a redundant pair of firewalls, I use the CARP VIP as my default gateway from the inside. The way it's set up right now, I have to point all the clients at one firewall or the other's physical (LAN) IP address. So if that firewall dies, I lose the ability to browse the web without manually reconfiguring each client…? Whereas if squid was bound to the CARP VIP, any in-flight HTTP transactions would fail, but at least I wouldn't have to go around and reconfigure every client. Is there some other mechanism I don't know about?

@marcelloc:

Listen squid on loopback(lo0) and create nat rules from carp address to 127.0.0.1
2.1 gui framework has the listen all as well listen on virtual ips, so squid3 on pfsense 2.1 will have this option and no need to workaround with nats.

That approach hadn't occurred to me - trying it now to see if it works, but I don't expect problems.
However, as to the second point: I am using 2.1-BETA, and I do not see any such option. ("squid3" package, version "beta 3.1.20 pkg 2.0.5_3")

-Adam

jimp

NAT is indeed the easy solution there.

marcelloc

@athompso:

However, as to the second point: I am using 2.1-BETA, and I do not see any such option. ("squid3" package, version "beta 3.1.20 pkg 2.0.5_3")

I said it will, I did not included the code to squid package yet ;)

hisoka01

Hi, my squid cannot start :'(, here is the message in cache.log:


2012/08/28 23:09:44| Accepting  HTTP connections at [::]:3128, FD 29.
2012/08/28 23:09:44| HTCP Disabled.
2012/08/28 23:09:44| Ready to serve requests.
2012/08/28 23:09:44| WARNING: ssl_crtd #1 (FD 19) exited
2012/08/28 23:09:44| WARNING: ssl_crtd #2 (FD 21) exited
2012/08/28 23:09:44| WARNING: ssl_crtd #3 (FD 23) exited
(ssl_crtd): Uninitialized SSL certificate database directory: /var/squid/lib/ssl_db. To initialize, r
un "ssl_crtd -c -s /var/squid/lib/ssl_db".
2012/08/28 23:09:44| WARNING: ssl_crtd #4 (FD 25) exited
2012/08/28 23:09:44| Too few ssl_crtd processes are running
2012/08/28 23:09:44| storeDirWriteCleanLogs: Starting...
2012/08/28 23:09:44|   Finished.  Wrote 0 entries.
2012/08/28 23:09:44|   Took 0.00 seconds (  0.00 entries/sec).
FATAL: The ssl_crtd helpers are crashing too rapidly, need help!

Squid Cache (Version 3.1.20): Terminated abnormally.
CPU Usage: 0.092 seconds = 0.061 user + 0.031 sys
Maximum Resident Size: 10532 KB
Page faults with physical i/o: 0
(ssl_crtd): Uninitialized SSL certificate database directory: /var/squid/lib/ssl_db. To initialize, r
un "ssl_crtd -c -s /var/squid/lib/ssl_db".

I have tried both squid 2 & 3, both got the same message ::)
Also it seems there is no "ssl_crtd" exist in my system…so I cannot try to run the command :o
Do you have any suggestion..? :'(

Thanks

marcelloc

I have this dir on my squid3 install.

What are you trying to configure?

ls -la /var/squid/lib/
total 6
drwxr-xr-x  3 proxy  proxy  512 Apr 14 02:17 .
drwxrwxr-x  7 proxy  proxy  512 Apr 14 02:17 ..
drwxr-xr-x  2 proxy  proxy  512 Apr 14 02:17 ssl_db